What is the AC output for the orgnal charger for Camelio x100?

hi,
I lost my ac adapter for my Camelio X100 camera. I want to know the AC output for the orignal adapter because I need to buy a new one.
Please if you have same camera model (Camelio X100) just take a look for PC adapter and tell me how much ouptu volt and output Amp ?
Best Regards

You should archive the material in it's native format so that you have the possibility to revisit the project and make changes or generate master files in other formats.
Use the Media Manager to consolidate your project into a single enclosing folder. This can be compressed into a .zip file or disk image. It will save space if you dont include render files, even more if you make the material that came from tape, offline -although you will have to recapture in that case.

Similar Messages

  • What is the range output on the airport express?

    What is the range output on the airport express?

    Loaded question. It's 150 feet or so, but for most folks, this is a meaningless number.
    Measurements like this are taken in a very large area like an aircraft hanger with no obstructions in the signal path.
    A typical sheetrock wall in a home will absorb 15-20% of signal or more. A ceiling will absorb even more. So, after a few walls or a ceiling and a wall, more than half of the signal is probably lost. That's about as many obstructions that the signal can penetrate and still deliver a decent quality signal with some speed.
    It's nice to know that the signal will go 150 feet or so, but few of us have houses with no walls or ceilings.

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • What are the characteristics of the sound output from the speaker iPad3?

    What are the characteristics of the sound output from the speaker iPad3?

    man -s4 proc
    or
    http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
    Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
    Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
    process whose procfs directory is being accessed.
    tim

  • The old Apple TV had a port for Analog the new one does not.  Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

    Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2? 

    click here for information.

  • App for streaming the audio output of the Mac via blouetooth to iphone

    HI,
    Looking for an app that streams the audio output of the Mac via blouetooth to iphone.
    Thx

    Please pardon the intrusion…
    Hi, roaminggnome!
    Congratulations on advancing to Level 4!
    At the Water Cooler in the Level 4 Lounge, we are throwing virtual confetti in celebration of your attainment of Level 4-dom. Would you care to join us at the Water Cooler?
    On the Discussions Home Page, down at the bottom, you will, hopefully, soon find the Lounge link available to you.
    Hope to see you there soon!

  • User Defined Field that gives the date output of the last price update.

    We would like to create a User Defined Field (UDF) with a Formatted Search (FMS) on the Item Master form that gives the date output of the last price update specifically the wholesale price.
    Last Price Update
    Pricelist 2 = Wholesale
    Is this feasible?
    If it is feasible what is the recommended approach?
    Current working UDF on Item Master.
    /* Date output is based on all the latest updates on the Item Master.*/
    select max(updatedate)
    from aitm
    where itemcode = $[oitm.itemcode]
    Resources that were helpful.
    1.(Note:1165947 - Tracking Item Price Changes.)
    2. Case 4-I6: Query on price updates. Mastering SQL Queries for SAP Business One By: Gordon Du

    Thank you Gordon,
    We are looking for the date output of the 'Last Price Update' based on 'Pricelist 2 = Wholesale' which is the challenge.
    These 2 are the parameters for the date output, I should have mentioned that in my original message.
    Last Price Update
    Pricelist 2 = Wholesale
    Per reading a bunch of other similar Forum Questions it looked like it is might not be possible to do. With there being no date on the AIT1 table and AITM.Updatedate is based on any and all updates not just last 'Last Price Update' and not sure how to use the loginstanc.
    Thanks,
    Vern

  • Central Management server - executed a query but how to send the query output in the form of mail?

    Hi All,
    i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
    basically query is checking the rows count from couple of user tables in servers.
    issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
    could you please suggest how can i achieve this?

    Copy to what?
    SELECT COUNT(*) FROM sys.objects
    Running the above statement returns two columns (server name and count)
    All the servers SS2005  and onwards , then use
    EXEC msdb.dbo.sp_send_dbmail 
         @profile_name = 'name', 
         @recipients = '[email protected]', 
         @query = 'SELECT COUNT(*) FROM sys.objects', 
         @subject = 'Count rows'
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to send the report output to the application server in a excel file

    Hello,
    how to send the report output to the application server in a excel file.
    and the report runs in background.
    Thanks in advance.
    Sundeep

    Dear Sundeep.
    I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
    D A T A D E C L A R A T I O N *
    TYPES: BEGIN OF TY_EXCEL,
    CELL_01(80) TYPE C,
    CELL_02(80) TYPE C,
    CELL_03(80) TYPE C,
    CELL_04(80) TYPE C,
    CELL_05(80) TYPE C,
    CELL_06(80) TYPE C,
    CELL_07(80) TYPE C,
    CELL_08(80) TYPE C,
    CELL_09(80) TYPE C,
    CELL_10(80) TYPE C,
    END OF TY_EXCEL.
    DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
    WA_EXCEL TYPE TY_EXCEL..
    E V E N T : S T A R T - O F - S E L E C T I O N *
    START-OF-SELECTION.
    Here you populate the Internal Table.
    Display - Top of the Page.
    PERFORM DISPLAY_TOP_OF_PAGE.
    E V E N T : E N D - O F - S E L E C T I O N *
    END-OF-SELECTION.
    SET PF-STATUS 'GUI_STATUS'.
    E V E N T : A T U S E R - C O M M AN D *
    AT USER-COMMAND.
    CASE SY-UCOMM.
    WHEN 'EXPORT'.
    Exporting the report data to Excel.
    PERFORM EXPORT_TO_EXCEL.
    ENDCASE.
    *& Form DISPLAY_TOP_OF_PAGE
    text
    --> p1 text
    <-- p2 text
    FORM DISPLAY_TOP_OF_PAGE .
    SKIP.
    WRITE: /05(128) SY-ULINE,
    /05 SY-VLINE,
    06(127) 'O R I C A'
    CENTERED COLOR 1,
    132 SY-VLINE.
    WRITE: /05(128) SY-ULINE,
    /05 SY-VLINE,
    06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
    CENTERED COLOR 4 INTENSIFIED OFF,
    132 SY-VLINE.
    WRITE: /05(128) SY-ULINE.
    E X C E L O P E R A T I O N
    CLEAR: IT_EXCEL[],
    WA_EXCEL.
    PERFORM APPEND_BLANK_LINE USING 1.
    WA_EXCEL-cell_02 = ' XYZ Ltd. '.
    APPEND WA_EXCEL TO IT_EXCEL.
    CLEAR: WA_EXCEL.
    WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
    APPEND WA_EXCEL TO IT_EXCEL.
    PERFORM APPEND_BLANK_LINE USING 1.
    ENDFORM. " DISPLAY_TOP_OF_PAGE
    *& Form APPEND_BLANK_LINE
    text
    -->P_1 text
    FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
    DO P_LINE TIMES.
    CLEAR: WA_EXCEL.
    APPEND WA_EXCEL TO IT_EXCEL.
    enddo.
    ENDFORM.
    *& Form EXPORT_TO_EXCEL
    text
    --> p1 text
    <-- p2 text
    FORM EXPORT_TO_EXCEL .
    DATA: L_FILE_NAME(60) TYPE C.
    Create a file name
    CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
    '.' SY-DATUM+0(4) INTO L_FILE_NAME.
    Pass the internal table (it_excel which is already populated )
    to the function module for excel download.
    CALL FUNCTION 'WS_EXCEL'
    exporting
    filename = L_FILE_NAME
    tables
    data = IT_EXCEL
    exceptions
    unknown_error = 1
    others = 2.
    if sy-subrc <> 0.
    message e001(ymm) with 'Error in exporting to Excel.'.
    endif.
    ENDFORM. " EXPORT_TO_EXCEL
    *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
    Regards,
    Abir
    Don't forget to award Points *

  • How can change the font in the script output and the data grid ?

    How can change the font in the script output and the data grid in Sql Developer?

    You can't easily unless you have the latest version (2.1.1).
    If you do have this version then changing the font in the Tools/Preferences menu under the code editor/fonts section will also change the font of the data grid.
    For details of changing the fonts in an earlier version then see Sue's post below.
    http://sueharper.blogspot.com/2010/03/back-to-basics-changing-font-setting-in.html

  • Does the RCA OUTPUT ON THE cdx-gt56ui run both sub and preout? if so how do I switch it to PRE-OUT

    Does the RCA OUTPUT on the CDX-GT56UI Car Stereo have both Sub and PRE-OUT? if so how do I switch to PRE-OUT?

    Hello Richard,
    The unit has 2-channel Preamp Outputs  on the rear of the receiver, used for connecting external amps. This unit doesn't have Sub Preamp Outputs.
    The rear preamp outputs can be set in the menu to output a full range signal to the rear channels, or a filtered signal to a subwoofer. When set to subwoofer, the output typically has a selectable low-pass filter and is non-fading. You can change the rear preamp outputs by selecting REAR/SUB option under Setup menu of the unit.
    If my post answers your question, please mark it as "Accepted Solution".
    Thank you for your post.

  • How to send the spool output to the specific user during ALE distribution

    Hi All
    In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
    I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
    Please help me to reslove the above issue
    Thanks & Regards
    KRISHGUNA

    Solved by myself

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Looking for a 12v charger for the 13" macbook pro

    looking for a 12v charger for the 13" macbook pro

    There are a number of 12V chargers available for the MBP but I prefer to use a 12V Inverter which allows me to use the provided chargers for my laptops and IOS devices both in-car and whilst out sailing.

  • How to put the alv output into the spool request?

    Hi guys,
    How to put the alv output into the spool request?
    Thanks!

    Hi
    Sending an ALV List screen output to SPOOL
    Convert ALV list to PDF and send mails to respective persons
    Regards
    Pavan

  • How to write the code to send the report output to the local file.

    dear all,
    how to write the code to send the report output to the local file.
    Thanks & Regards,
    Jyothi.

    Hi,
    Try this , it will display report and download the file as well. Just vhange the path and execute
    TYPE-POOLS : SLIS.
    DATA : IT_SCARR TYPE TABLE OF SCARR,
           IT_FCAT  TYPE SLIS_T_FIELDCAT_ALV.
    SELECT *
    FROM SCARR
    INTO TABLE IT_SCARR.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    *   I_PROGRAM_NAME               =
    *   I_INTERNAL_TABNAME           =
        I_STRUCTURE_NAME             = 'SCARR'
    *   I_CLIENT_NEVER_DISPLAY       = 'X'
    *   I_INCLNAME                   =
    *   I_BYPASSING_BUFFER           =
    *   I_BUFFER_ACTIVE              =
      CHANGING
        CT_FIELDCAT                  = IT_FCAT
    * EXCEPTIONS
    *   INCONSISTENT_INTERFACE       = 1
    *   PROGRAM_ERROR                = 2
    *   OTHERS                       = 3
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
    *   I_CALLBACK_PROGRAM             = ' '
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   I_STRUCTURE_NAME               =
    *   IS_LAYOUT                      =
       IT_FIELDCAT                    = IT_FCAT
    *   IT_EXCLUDING                   =
    *   IT_SPECIAL_GROUPS              =
    *   IT_SORT                        =
    *   IT_FILTER                      =
    *   IS_SEL_HIDE                    =
    *   I_DEFAULT                      = 'X'
    *   I_SAVE                         = ' '
    *   IS_VARIANT                     =
    *   IT_EVENTS                      =
    *   IT_EVENT_EXIT                  =
    *   IS_PRINT                       =
    *   IS_REPREP_ID                   =
    *   I_SCREEN_START_COLUMN          = 0
    *   I_SCREEN_START_LINE            = 0
    *   I_SCREEN_END_COLUMN            = 0
    *   I_SCREEN_END_LINE              = 0
    *   IR_SALV_LIST_ADAPTER           =
    *   IT_EXCEPT_QINFO                =
    *   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER        =
    *   ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = IT_SCARR
    * EXCEPTIONS
    *   PROGRAM_ERROR                  = 1
    *   OTHERS                         = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
      EXPORTING
    *    BIN_FILESIZE              =
        FILENAME                  = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
    *    FILETYPE                  = 'ASC'
    *    APPEND                    = SPACE
    *    WRITE_FIELD_SEPARATOR     = SPACE
    *    HEADER                    = '00'
    *    TRUNC_TRAILING_BLANKS     = SPACE
    *    WRITE_LF                  = 'X'
    *    COL_SELECT                = SPACE
    *    COL_SELECT_MASK           = SPACE
    *    DAT_MODE                  = SPACE
    *    CONFIRM_OVERWRITE         = SPACE
    *    NO_AUTH_CHECK             = SPACE
    *    CODEPAGE                  = SPACE
    *    IGNORE_CERR               = ABAP_TRUE
    *    REPLACEMENT               = '#'
    *    WRITE_BOM                 = SPACE
    *    TRUNC_TRAILING_BLANKS_EOL = 'X'
    *  IMPORTING
    *    FILELENGTH                =
      CHANGING
        DATA_TAB                  = IT_SCARR
    *  EXCEPTIONS
    *    FILE_WRITE_ERROR          = 1
    *    NO_BATCH                  = 2
    *    GUI_REFUSE_FILETRANSFER   = 3
    *    INVALID_TYPE              = 4
    *    NO_AUTHORITY              = 5
    *    UNKNOWN_ERROR             = 6
    *    HEADER_NOT_ALLOWED        = 7
    *    SEPARATOR_NOT_ALLOWED     = 8
    *    FILESIZE_NOT_ALLOWED      = 9
    *    HEADER_TOO_LONG           = 10
    *    DP_ERROR_CREATE           = 11
    *    DP_ERROR_SEND             = 12
    *    DP_ERROR_WRITE            = 13
    *    UNKNOWN_DP_ERROR          = 14
    *    ACCESS_DENIED             = 15
    *    DP_OUT_OF_MEMORY          = 16
    *    DISK_FULL                 = 17
    *    DP_TIMEOUT                = 18
    *    FILE_NOT_FOUND            = 19
    *    DATAPROVIDER_EXCEPTION    = 20
    *    CONTROL_FLUSH_ERROR       = 21
    *    NOT_SUPPORTED_BY_GUI      = 22
    *    ERROR_NO_GUI              = 23
    *    others                    = 24
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
      EXPORTING
        DOCUMENT               = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
    *    APPLICATION            =
    *    PARAMETER              =
    *    DEFAULT_DIRECTORY      =
    *    MAXIMIZED              =
    *    MINIMIZED              =
    *    SYNCHRONOUS            =
    *    OPERATION              = 'OPEN'
    *  EXCEPTIONS
    *    CNTL_ERROR             = 1
    *    ERROR_NO_GUI           = 2
    *    BAD_PARAMETER          = 3
    *    FILE_NOT_FOUND         = 4
    *    PATH_NOT_FOUND         = 5
    *    FILE_EXTENSION_UNKNOWN = 6
    *    ERROR_EXECUTE_FAILED   = 7
    *    SYNCHRONOUS_FAILED     = 8
    *    NOT_SUPPORTED_BY_GUI   = 9
    *    others                 = 10
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

Maybe you are looking for