What is the actual solution to HomePlug + Infinity...
I had the Infinity service installed on Friday past 28th Oct and thought all was well!
Well it was untill I tried connecting my PC / PS3 / XBOX etc through the Solwise homeplugs NET-PL-200AV-PEW-N I'm using.
At the HH3 on a direct connection via cat5 I'm getting 28552 kbps down and 1626 kbps up.
Line stats via bt speedtester show line profile 31359 up and 2000 down.
Problem is that connecting through the homeplugs I'm only getting 3462 kbps down and 1684 kbps up
Now I've spent the last few nights googling forums etc in search of a solution yet I have been unable to find anyone who has figured it out, and has given up dumping the homeplug route for a wired setup!
TBH I have no intention unless as a last resort of putting in Cat wiring
Basically I'm starting to wonder is the issue caused by the HH3/BT Modem setup? "or" is the issue with the homeplugs?
Testing the homeplugs with the revelant software shows a connection speed between homeplugs of between 120 - 150 Mbps suggesting to me that isn't where the restriction is present?
I'm trying to figure out would buying a decent VDSL model like the Draytek Vigor 2750n connecting to the homeplugs solve it or are homeplugs really the issue?
ps. I've tried every suggestion I have come across so far.....moving the power supplies away from the modem/hh3 and the homeplug, turning off the wireless on the hh...
Surley there is a solution to this ?
edit: to add my HH3/Modem is not in the same room as any of the things I am connecting, I'm using a Solwise NET-PL-200-AV-PUSH beside the BT setup to distribute the connection around the house to 3 Solwise homeplugs NET-PL-200AV-PEW-N
And as well as the above I just cannot seem to get my iPhone4 to connect wireless to the HH3 entering the correct password just results in an error message saying "unable to join the network BTHub3-####
I have all the Solwise plugs and the HH3 broadcasting on Channel6
People seem ok on the 200Mbps see msg. #12 in THIS THREAD.
Mention about filters... HERE.
Slow HomePlug? Try A Powerline Filter
I'm stuck as I've never used them so leave things for Tony to help.
Edit and Wizzen.
Loads of people have used the higher speed ones so there must be a solution somewhere.
Good luck
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)
Similar Messages
-
Messages beta crashes on launch - the actual solution
since this garbage forum won't let you edit a "solution" even if it is incorrect, i'm creating a competing duplicate topic as a kludge to address the exact same issue. joy.
here is the original question ..
"i've tried uninstalling, clearing out all iChat accounts and reinstalling.
i've tried the 8.8.8.8 DNS port suggestion.
i've tried deleting security certificates in keychain.
i've tried setting the messages app on my iPhone to use my apple id instead of phone number.
no matter what i do, the messages beta crashes on launch, sometimes after asking if i want to restore windows, sometimes without.
sometimes after a clean reinstall i can send one message to my wife's account/phone before there is a crash.
i've tried uninstalling a multitude of times in a multitude of ways, but whatever i do, messages beta keeps crashing on launch.
so, what now?
am i basically just screwed, so that if anyone message my apple id instead of my phone number the messge will be sent to this app which will not open for more than a couple of seconds at best?"
and here is the actual solution for this bug..
https://discussions.apple.com/message/17848204#17848204
"I have been having the same problems.
Messages would crash immediately when I opened the application. So fast that I coudn 't even uninstall it.
I finally fixed it by right clicking on the app in the applications folder then 'get info' and then unchecking the 'open in 32-bit mode' check box.
Now it works perfectly and hasn't crashed since." ~ antonydThank you!! This solved it for me!
striatic wrote:
since this garbage forum won't let you edit a "solution" even if it is incorrect, i'm creating a competing duplicate topic as a kludge to address the exact same issue. joy.
here is the original question ..
"i've tried uninstalling, clearing out all iChat accounts and reinstalling.
i've tried the 8.8.8.8 DNS port suggestion.
i've tried deleting security certificates in keychain.
i've tried setting the messages app on my iPhone to use my apple id instead of phone number.
no matter what i do, the messages beta crashes on launch, sometimes after asking if i want to restore windows, sometimes without.
sometimes after a clean reinstall i can send one message to my wife's account/phone before there is a crash.
i've tried uninstalling a multitude of times in a multitude of ways, but whatever i do, messages beta keeps crashing on launch.
so, what now?
am i basically just screwed, so that if anyone message my apple id instead of my phone number the messge will be sent to this app which will not open for more than a couple of seconds at best?"
and here is the actual solution for this bug..
https://discussions.apple.com/message/17848204#17848204
"I have been having the same problems.
Messages would crash immediately when I opened the application. So fast that I coudn 't even uninstall it.
I finally fixed it by right clicking on the app in the applications folder then 'get info' and then unchecking the 'open in 32-bit mode' check box.
Now it works perfectly and hasn't crashed since." ~ antonyd -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
What are the standard Solutions available for Complaints Management in CRM?
Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin -
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
-
What is the actual size of an (empty) varray in a record?
what is the actual size occupied by an (empty) varray in a record?
For example, if I create my table defined as:
create or replace type XXX as object (
myRefs VARRAY(10) of REF(yyy)
create table YYY as XXX;
what is the actual size of the record of type XXX when 'myRefs' is empty? For some reason, select data_length from all_tab_cols where table_name = YYY seems always to return 3K as the length of column myrefs.... is that correct? If not, what is the correct size?A tad late here...
Storage sizes of REF attributes are described here:
[Design Considerations for REFs - Storage Size of REFs|http://download.oracle.com/docs/cd/E11882_01/appdev.112/e11822/adobjdes.htm#i452226]
The size of your REF attribute (or element, in your case) will depend on whether it is primary key-based or system-generated, whether it is scoped or not, and whether it carries with it a rowid hint. The overall size of your VARRAY attribute as it grows will also depend on whether you allow null REF values or not, but essentially will be the size of your REF multiplied times the number of elements in your VARRAY (plus a small, constant amount of storage for internal housekeeping, both for the attribute and for each element).
You could try the VSIZE function as an appromixation...
[Oracle® Database SQL Language Reference - VSIZE|http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions233.htm#SQLRF06162]
Hope it helps...
Gerard -
Help Me.
What is the best solution for this problem ?Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html -
I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
[Sales/Shipment report] - What's the best solution?
Hello everybody.
I have to develop a report with some sales data, delivery service data and shipment costs data.
I have the cubes: 0SD_C03, 0SD_C04, 0LES_C02.. and I thought to do a multicube, but I don't no how to link these cubes...
I don't have, for example, Sales Document/Item and/or Delivery Document/Item in all os these cubes...
What is the best solution to this sittuation?
I thought in some solutions like...
1 - Extend extractor of 0LES_C02 to include Sales Doc/Item, but I don't know if all delivery doc is related to a sales doc.
2 - I know I have all the fields that I want in the tables VBAP and LIPS...so I thought in create an generic extractor with a view of these two tables, and than creat a Z cube, to receive these datas...
I really don't know whats the best solution, or if there is abother solution to this....
I'll apreciate ideas, or a solution from someone that already face with this and developed a solution.
Best Regards,
ThiagoHi,
Its better for you to add sales order,item in the cubes also from the source where your cube gets data ie from DSO as they are only point through which you can combine sales,delivery and billing data.
Thanks,
Arun -
What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org -
What is the best solution for migrating from Maverick to Yosemite?
What is the best solution for migrating from Maverick to Yosemite? Anyone have suggestions?
Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.
-
What is the actual cost of SAP original Software?
hi experts
<b>What is the actual cost of SAP original Software to implement in one software company.</b>
thanks in advnaceBetween $1 and $100,000,000.
Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
EDIT:
I just noticed you said "one software company". There are other options if you want to be a "partner". It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
Message was edited by: Norman Salter -
Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro. Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine. What is the best solution to this situation
Call Apple and make a appointment.
You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
Good Luck -
i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?
What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock
Maybe you are looking for
-
I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help
-
Hello, I'm a relatively accustomed Arch user returning after a laptop replacement. Nearly everything works perfectly, except for the fact that the two mouse buttons below the touchpad don't work, even though the touchpad itself is fully functional, x
-
IP address missing, cable company says its my iMac
We've have Road Runner high-speed access for more than a year, no problems. Last week, we started getting "You are not connected to the Internet," or REALLY slow/incomplete downloads, but it was hit or miss. Called the cable company, they had me rese
-
Hi all, I have a BIG problem with our call list management process. We are configuring the marketing scenario in our CRM 4.0 system in order to generate several calls from a given target group. Our problem is based on the agent distribution (of these
-
Hi, I have ARD 3.2 installed on my 10.4.10 machine with client 3.2.1. I am trying to make a new client install from the file menu. When I do this I get an unexpected error. I have tried with customer settings and just a straight make client install.