What is the actual use of the background print parameters

Hello all,
When we are scheduling a job it asks for print parameters like output device:
Can any one please let me know what is the actual meaning of print parameters and what it does when we set spool parameters.
Thanks, kumar.

Hi Bharani,
Normally when you execute a job in the back ground say like time taking reports or daily Scheduled background jobs, system will create a spool request for that so that you would be able to view the output of the report later and further take the printout etc. Hence, it is asking for print parameters.
Print parameters are those where you specify the output device, print preview, spool retention period etc, Basically those are the settings required for the way a print job needs to be triggered.
Regards,
Ravi Kiran

Similar Messages

  • What is the best printer for use with iMac osx lion 10.7.4

    What is the best printer to purchase for use with imac osx lion 10.7.4. Preferably an all-in-one with wireless capabilities. around $125-$150

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

  • BAPI_SHIPMENT_COST_ESTIMATE  What are the min. required parameters to pass

    Hi All,
       I would like to know what are the minimum required  parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
    Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
    If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price). 
    What will be the item category it will pick. I like to see it picks  basic price related item category.
    Does any body has used this bapi ?
    Appreciate your fast reply.
    Regards,
    Leona

    Hello, I´ll try to answer your question:
    1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
    I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
    The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
    2. is it possible to perform estimation to inbound shipments ?
    Yes it´s depend on the shipment type. In standard system 0010 is used
    In the example that I have I use an inbound delivery
    3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
    I think that the bapi only run in simulation mode and it can not create any document
    4. is there any problem if i customized my scd item categories to open manualy ?
    I think that the bapi needs to work properly automatic iten categories
    can you please post sample code ( or any other doc's ) for this bapi ?
    I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
    Best regards,

  • What are the content conversion parameters for this structure

    Hi All,
    The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
    Schedule D - District/Port List (by District Code) [Produced13APR11]
    District |    Port      |    Name
    Code     |    Code      |
    01       |              |    PORTLAND, ME
             |    0101      |    PORTLAND, ME
             |    0102      |    BANGOR, ME
             |    0103      |    EASTPORT, ME
             |    0104      |    JACKMAN, ME
             |    0105      |    VANCEBORO, ME
             |    0106      |    HOULTON, ME
             |    0107      |    FORT FAIRFIELD, ME
             |    0108      |    VAN BUREN, ME
             |    0109      |    MADAWASKA, ME
             |    0110      |    FORT KENT, ME
             |    0111      |    BATH, ME
             |    0112      |    BAR HARBOR, ME
             |    0115      |    CALAIS, ME
             |    0118      |    LIMESTONE, ME
             |    0121      |    ROCKLAND, ME
             |    0122      |    JONESPORT, ME
             |    0127      |    BRIDGEWATER, ME
             |    0131      |    PORTSMOUTH, NH
             |    0132      |    BELFAST, ME
             |    0152      |    SEARSPORT, ME
             |    0181      |    LEBANON AIRPORT
             |    0182      |    MANCHESTER USER FEE AIRPORT, NH
    02       |              |    ST. ALBANS, VT
             |    0201      |    ST. ALBANS, VT
             |    0203      |    RICHFORD, VT
             |    0206      |    BEECHER FALLS, VT
             |    0207      |    BURLINGTON, VT
             |    0209      |    DERBY LINE, VT
             |    0211      |    NORTON, VT
             |    0212      |    HIGHGATE SPRINGS/ALBURG

    since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
    Regards,
    Ninu

  • What is the best printer for wireless printing with the iPhone?

    What is the best printer for wireless printing witth the iPhone?

    Roaminggnome has the list......pick on of those TERRIBLE printers and go for it....
    I hope Apple see fit to broaden this list, because, having thrown away several of those brands in my life, I now have a network compatble BROTHER printer that's awesome,
    "There's an app for that," ie the BROTHER, but you can only print pictures and soforth.
    Apple, step up, open up the list of printers we can use!

  • What are the AM Tuning parameters need to be set for 500 concurrent users

    Hi All,
    We are using JDEVADF_11.1.1.5.0.
    What are the exact AM parameters(Pooling and Scalability tab) to be set when we planned for 500+ concurrent users?
    Along with this do we need to set any parameters at weblogic server level, if any please give inputs.
    Any input's would be appreciated.
    Thanks in advance.
    Regards,
    Dinesh

    We can?t give you exact numbers as there are many factors influencing the performance. In hte end you have to make a load test to find the right set of parameters. A good starting point is Andrejus's blog Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Internal Connections and  Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level
    Timo

  • What r the content conversion parameters

    Hi All
    This link contains the text file.
    http://www.census.gov/foreign-trade/d/dist.txt
    what are the content conversion parameters are required to convert that text to xml.

    Make it simple  recordset structure as below ...
    Details
            ----------->District code
            ----------->Port code
            -----------> Name
    Recordset structure   Details, *
    Details.fieldSeparator  :
    Details.endSeparator  'nl'
    Details.fieldNames :  District code, Port code, Name

  • What are the content conversion parameters

    Hi All
    This link contains the text file.
    http://www.census.gov/foreign-trade/schedules/d/dist.txt
    what are the content conversion parameters are required to convert that text to xml.

    <sen_dt>
         <prefix>
              <heads>
                   <dc>               
                   <pc>
                   <name>
              <main>
                   <dcno>
                   <pcno>
                   <name1>
    <rec_dt>
         <prefix>
              <District_code>             District code      optional
              <port_code>              port code          1
              <name>                   name              
         <main>
              <District_code_no>
              <port_code_no>
              <name1>
    content conversion
         document name:<sen_dt>
         document namespace:http::----
         document offset:--
         recordset name:input
         recordset structure:heads,1,main,*
         recordset sequence:Ascending
         recordset per message:----
         keyfield name:---
    prefix.fieldfixedlengths:---
    prefix.endSeparator:---
    prefix.fieldNames;---
    prefix.keyFieldvalue:--
    prefix.keyFieldlnStructure:---
    main.fieldFixedLengths:9,
    main.fieldSeparator:|
    main.endSeparator:'nl'
    main.fieldNames:district code,port code,name
    main.keyFieldValue:
    main.keyFieldlnStructure:

  • What are the proper print settings to print two sides, landscape and bind on the short side?

    what are the proper print settings to print two sides, landscape and bind on the short side?

    This is a question best asked in the appropriate product forum.

  • What is the standard print prg for Purchase Order

    Hi,
    I am working on forms, what is the standard print program for purchase order.
    Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
    Regards,
    clara

    Here are the default entries in the configuration
    NEU     Purchase order     1     SAPFM06P     ENTRY_NEU     MEDRUCK
    NEU     Purchase order     2     SAPFM06P     ENTRY_NEU     MEDRUCK
    NEU     Purchase order     6     RSNASTED     EDI_PROCESSING
    NEU     Purchase order     A     RSNASTED     ALE_PROCESSING
    Regards,f
    Ravi
    Note : Please mark the helpful answers

  • What are the hierarchy relevant parameters?

    What are the hierarchy relevant parameters?

    <sen_dt>
         <prefix>
              <heads>
                   <dc>               
                   <pc>
                   <name>
              <main>
                   <dcno>
                   <pcno>
                   <name1>
    <rec_dt>
         <prefix>
              <District_code>             District code      optional
              <port_code>              port code          1
              <name>                   name              
         <main>
              <District_code_no>
              <port_code_no>
              <name1>
    content conversion
         document name:<sen_dt>
         document namespace:http::----
         document offset:--
         recordset name:input
         recordset structure:heads,1,main,*
         recordset sequence:Ascending
         recordset per message:----
         keyfield name:---
    prefix.fieldfixedlengths:---
    prefix.endSeparator:---
    prefix.fieldNames;---
    prefix.keyFieldvalue:--
    prefix.keyFieldlnStructure:---
    main.fieldFixedLengths:9,
    main.fieldSeparator:|
    main.endSeparator:'nl'
    main.fieldNames:district code,port code,name
    main.keyFieldValue:
    main.keyFieldlnStructure:

  • What is the best printing option for iPad (3)

    What is the best printing option for iPad (3)?

    The BEST option would be to buy a wireless printer that supports AirPrint, a wireless printing feature.

  • What is the better printer the c4680 or the c5180

    What is the better printer the c4680 or the c5180

    Hi,
    What do you mean by better ? I would buy the C4680 for its support
        http://support.hp.com/us-en/product/HP-Photosmart-C4600-All-in-One-Printer-series/3739148/model/3739...
    Not the other:
      http://support.hp.com/us-en/product/HP-Photosmart-C5100-All-in-One-Printer-series/1153538/model/1153...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Supress Background Print parameters when user executes ALV report by F9

    Hi friends,
         How can we Supress Background Print parameters pop-up, when user executes ALV report by F9
    or by navigation from selection screen -i.e;  Program ->>Execute in Background.
    Please guide me
    Thanks in Advance,
    Ganesh

    Sorry,
    i need to supress the POP-UP which asks for background Print Parameters in the ALV report. when i press F9 in a selection - screen of a Tcode
    as we supress Pop-up for a smartform or script by passing the Print Parameters
    This 'RS_SET_SELSCREEN_STATUS' excludes the commands(say F9 function code) in report
    I think we need to set the Print paramters in the Program
    please guide me
    Thanks,
    Ganesh

  • What is the background music to this video I know it's a ilife jingle or sound effect but what is it

    I was a watching a video of a prank from these well known prank ears on youtube and I want to know what the background music is I know for a fact that it is a ilife jingle or sound effect but I don't know what it is here's a link to that video listen to the background music please reply. www.youtube.com/watch?v=Adcy-66et3s
    It is also at the beginning of a video by theroyalstampede just goto their vids and look for superman car yard
    It's like an irish theme but WHAT IS IT ?

    Shazam identifies it as "Dirry Of Dj Smellyballz 2" by Big J. This could be wrong of course - I've never heard of that particular tune. My first attempt to identify it picked up the tune in the ad preceding the video clip, hence my reason for deleting my earlier post.
    I agree with AppleMan in that I've never come across it in the iLife jingles.
    John

Maybe you are looking for

  • Oracle Reports 11.1.2.0.0, [PDF:subset] failed.

    Hi Expert, Refer to document "How to Use Font Subsetting in Reports for PDF Output [ID 207711.1]" , setup font subset in Oracle Forms 11.1.2.0.0 failed. Copy simsun.ttf file to <ORACLE_HOME>/reports/fonts. Add <ORACLE_HOME>/reports/fonts directory to

  • I AM MAD THAT I CANT OPEN AND CLOSE iTUNES USING COMMAND-1

    people used to be able to press command+1 and open the iTunes window or close it and now you can't keyboard shortcuts still says you can this is inconsistent and annoying becsuae I love keyboard shortcuts and I like being able to close my window and

  • Error while introspecting the JAR file

    I get the following error while introspecting the JAR into BPM [Error] Introspection exception : Internal Error: java.lang.UnsupportedClassVersionError: Bad version number in .class file. Anybdy knows whats the error?

  • How do I restore my iPhoto Library after emptying the trash?

    I recently transferred my iPhoto from my external hard drive to my desktop of my macbook air. I have two different iPhoto Libraries on this computer. IphotoAug2014 and IphotoFeb. I just now deleted the iPhotoFeb from my desktop and then emptied my tr

  • BSP extension "download" - event handling problem

    Folks, First of all, I apologize if the answer is already out there, but I spent quite some time to find the solution for my problem but finally gave up: I implemented the Download extension from Brian's and Tom's book. Since I am using an MVC based