What is the "admin" user in EAS Console?

I am still relatively new to Planning and Essbase. I am trying to figure out the relevance of "admin" user in the Essbase Administration Console. My colleague and I have seen several instances of this admin user in EAS console but it doesn't appear to represent a "live" user. We have also seen references to "admin@native directory" in the Essbase and EssbaseODL logs. In the last couple of days, we were unable to run a script that automatically backs up a database because this admin user was performing a spreadsheet operation. We were able to successfully force the admin account off via the console but we know for a fact that no one else is logged in.
Below are excerpts from the Essbase log. Please see the text in red.
Any insight on this would be greatly appreciated.
Thanks!
Essbase.log
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1051164)*Received login request from *[::1]
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1051187)*Logging in user *[EPM11hypplan@AD]* from *[::1]
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3096*Info*(1051001)*Received client request: *List Connected Users *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***2100*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***2100*Info*(1051037)*Logging out user *[admin@Native Directory]*, active for *63 *minutes
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3020*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3020*Error*(1013291)*Failed to logout user *[admin@Native Directory]*: user has requests running
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3020*Warning*(1051003)*Error *1013291 *processing request *[Logout User]* - disconnecting
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3360*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3360*Error*(1013291)*Failed to logout user *[admin@Native Directory]*: user has requests running
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3360*Warning*(1051003)*Error *1013291 *processing request *[Logout User]* - disconnecting
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1013220)*Supervisor *[EPM11hypplan@AD]* has forced user *[admin@Native Directory]* to logout
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1051037)*Logging out user *[admin@Native Directory]*, active for *48 *minutes
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3096*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3096*Info*(1013220)*Supervisor *[EPM11hypplan@AD]* has forced user *[admin@Native Directory]* to logout
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3096*Info*(1051037)*Logging out user *[admin@Native Directory]*, active for *28 *minutes
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***2100*Info*(1051001)*Received client request: *Logout User *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***2100*Error*(1051020)*Cannot log yourself out!
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***2100*Warning*(1051003)*Error *1051020 *processing request *[Logout User]* - disconnecting
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3020*Info*(1051001)*Received client request: *Select Application/Database *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3020*Info*(1051009)*Setting application *FinPlan *active for user *[EPM11hypplan@AD]
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3360*Info*(1051001)*Received client request: *Get Application State *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3092*Info*(1051001)*Received client request: *Set Application State *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:15:08*2013*Local*ESSBASE0***3096*Info*(1051001)*Received client request: *List Objects *(from user *[EPM11hypplan@AD]*)
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***2100*Error*(1051021)*You have been logged out due to inactivity or explicitly by the administrator.
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***2100*Warning*(1051003)*Error *-1 *processing request *[List Substitution Variables]* - disconnecting
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***3020*Info*(1051001)*Received client request: *Logout *(from user *[admin@Native Directory]*)
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***3020*Info*(1051037)*Logging out user *[admin@Native Directory]*, active for *49 *minutes
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***3360*Info*(1051001)*Received client request: *Logout *(from user *[admin@Native Directory]*)
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***3360*Info*(1051037)*Logging out user *[admin@Native Directory]*, active for *2 *minutes
Fri*Oct*18*07:16:33*2013*Local*ESSBASE0***3092*Info*(1051164)*Received login request from *[::ffff:10.112.14.74]

Admin user is a administrator user or a super user in essbase .Admin user has full permission to access the entire system which includes all users and groups.Admin user has the rights to create users Perform dataloads,write and execute calculations,delete users
In your log i can see admin user was active and doing some operations. EPM11hypplan user has forced admin user logout of server.I guess you have set up EPM11hypplan user which has same privilege of admin user to run process.Also check if any particular job process is run via admin id .
More info refer the below url
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?dsenative.html
Thanks,
Sreekumar Hariharan

Similar Messages

What is the Admin user in OWB

Being a newbie to OWB, I wonder what is the admin user in OWB, which i can use to login in repository browser, so that i can see all the avaliable workspaces, etc.,
Thanks,
Prabha

Prabha-
OWB doesn't really have a separate "admin" user, though the repository owner itself is of course the full admin over everything. If you followed the docs or tutorials when setting up your environment, it's likely something like OWB_REPO_OWNER.
Though really it's whatever database user you specified by created when first creating your repository.
Anyway, it's this user that is always able to fully see and control all objects.
Thought I should say here also after re-reading your comment and your reference to "workspaces"- are you referring to OWB 11g? I must admit I haven't delved into 11g yet, and so am unsure if things are different. My comments definitely apply for OWB 10g however.

Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents) What is the best way to go about doing this. Also should a 2t hdd be partitioned.

iMac with 256ssd and 2t hdd. Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents) What is the best way to go about doing this. Also should a 2t hdd be partitioned.

Yes, you can move your user directories to the HD and keep your OSX and Applications on the SSD drive.
Whether you partition your HD or not depends on how much data you have and how you propose to use your HD.
Are you planning to use your iMac as a Time Machine backup volume? If so, partition it off.
Do you have huge data files, eg video, music, photos?
How much of your 2tb drive will be "free" once it is loaded with all your data?
A little more information is required before the optimal configuration can be recommended for your use.

When trying to log in as the Admin user, get "error on page"

Hi gurus, I am brand new on this new product. Yesterday I just downloaded the latest Apex (2.2) and installed it successfully by following the instuctions (for I got these two lines in the install log: Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
). I have got two problems. First, when I try to log in as the Admin user, and as soon as I start typing the user name and password on the logon page, I see "error on page" at the very lower left corner of the browser (IE 6). So I can not log in. Second, the Oracle HTTP server takes up almost 100% of my CPU (by itself, the 10g instance does not take up any noticeable CPU if I am not doing anything, but the HTTP server keeps the CPU busy all the time no matter what).
What did I do wrong? Please help me. Thanks a lot.
Ben

Hello user526627 and all,
I also have installed apex 2.2 successfully. At least I've not found any errors and this is the tail of install.log:
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex
timing for: Upgrade
Elapsed: 00:00:00.12
JOB_QUEUE_PROCESSES: 10
Completing registration process.
Validating installation.
timing for: Validate Installation
Elapsed: 00:03:18.10
timing for: Complete Installation
Elapsed: 00:38:11.54
Interesting thing is that I am getting 404 when I use suggested http://host:port/pls/apex/apex_admin or http://host:port/pls/apex (I am using host name of the machine or ip address). However the http://host:port/pls/htmldb/ and http://host:port/pls/htmldb/apex_admin works (at least, I am getting a page without images). In addition, when I provide user name and password on the http://host:port/pls/htmldb/apex_admin page and click on 'Login' nothing happens... :(
This is a clean install. I've also used a HTMLDB 2.0 install from companion cd (Oracle10g R2 for Windows) - this had worked ok, however it did stop working when I istalled apex 2.2 on top of it. I've dropped flow-schemas and tablespaces I've created for apex 2.2 install and started the install over again. However, still no luck. Here is the command I am using to start apex 2.2 installation:
@apexins ********** htmldb_data htmldb_files htmldb_temp /i/ none
I have installed oracle http server in a standalone home, the http server works.
Thank you for your time,
Daniel

How to see a shared services user in EAS Console?

Hii, I have externalized security for Essbase through shared services, now I created a new user in HSS & provisioned it with Filter, Write option in HSS. Now I refresh the security & want to see the user reflected in EAS console, I want this because I want to create essbase filters on that user. So if I am able to see that user in EAS Console, I can assign different filters to it. Can I do that?

Make sure you've done this if you have a problem: Re: Oracle EPM System Rel. 11.1.1.2 - Assign Essbase Filter in Shared Services
Follow John Goodwin's steps in this post: Unable to assign filters in Shared Services
Note Glenn's comment about sometimes having to assign the filters through MaxL because of issues although I think John's answer in the first post should help a lot.
Regards,
Cameron Lackpour

Don't know the Admin User!!

Hi everybody ,,,
I have a problem which is when I wanna to install a program the computer asks me to type the admin user and password and I don't know both of them .. also my user which I have been using it is a standard user although it's the user which I created it when I used the Mac the first time,,
so ,,
could u help me please ,, how could I know the admin user and password or how could I install the programs even with the standard user ?
and how could I make it Admin,,
Thanks,, & I'm looking forward to have an answer ..
Message was edited by: LioN_HeArT

Excellent! I had the problem of loss of admin rights myself, and was curious if root had also been messed up so went to change his password. I thus discovered what is Apples recommended solution for the vanilla version of the problem. Incidentally there is at the top of the listing for 10.5 topics a little pink tinged section and that contains a slew of Leopard solutions.
LioN HeArT, two pieces of advice 1)you really ought not to have (if so) your only user be an admin. That would mean that attacks whilst browsing especially could wreak more danmage. Your day to day user should be a non admin. If you care to follow my advice, despite your efforts you should demote the admin user to standard. Do that because if I am right about your scheme most of your user created data will be in that admin and it is a clart to shift the data to a non admin. HOWEVER before you do that follow this second advice
2) set up two new admins. One you will use for the normal sorts of admin tasks, the other you hold in reserve and just test occasionally.
By the way I hope you have disabled the root. To leave him enabled is a security risk. The easiest way is in Directory Utility but you can also do it from a single user boot. Root and the admins should have good passwords but I suspect they have judging from your upper/lower case username here.
Finally, tidy up Apple's website and mark the query as settled, if it is so.

FDQM - Not able to login with the admin user

Hi,
I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
Error: Error retreiving security agent header.
Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
Can any one please help me. It is most critical and your replies are most welcome & appreciated.
Thanks
Damodhar

When was the last time you were able to login and what has changed since that time?
Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
Thank you,
Todd Rebner

How to find what port the admin server is running

how can I find out what port the admin server is running on a server?
thanks,

Hi
Go to your domain root folder/config and open config.xml file in any editor. Search for the name of the admin server which is typically like AdminServer and under this tag see if you have a tag by name <listen-port>. If yes, then you should see the port number. If not, it means it is running at default port of 7001.
If you have admin access, i hope when you login you will be giving url like http://adminhost:adminport/console. Now this adminport is the port on which admin server is running. If not, then check config.xml file.
Thanks
Ravi Jegga

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

Enter a password for the ADMIN user,Error in installing Oracle Apex,

hi, everybody,
Greetings,
Iam trying to install oracle Apex, By coming this step it shows this error, Could you Please help me to solve this error.
SQL> @apxchpwd.sql
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
l_error_lines wwv_flow_global.vc_arr2;
ERROR at line 3:
ORA-06550: line 3, column 28:
PLS-00201: identifier 'WWV_FLOW_GLOBAL.VC_ARR2' must be declared
ORA-06550: line 3, column 28:
PL/SQL: Item ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 6, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 6, column 5:
PL/SQL: Statement ignored
ORA-06550: line 7, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 7, column 5:
PL/SQL: Statement ignored
ORA-06550: line 15, column 31:
PLS-00201: identifier 'WWV_FLOW_SECURITY.STRONG_PASSWORD_VALIDATION' must be
declared
ORA-06550: line 15, column 5:
PL/SQL: Statement ignored
ORA-06550: line 22, column 35:
PLS-00201: identifier 'WWV_FLOW_UTILITIES.STRIPHTML' must be declared
ORA-06550: line 22, column 9:
PL/SQL: Statement ignored
ORA-06550: line 25, column 9:
PLS-00320: the declaration of the type o

suresh.m2015,
It's going to be impossible for anyone in this forum to help with your issue if you don't provide any more detail about your environment and Apex installation. However, from your post it looks like the Apex database objects are missing or invalid.
Did you follow the Apex installation guide step by step? For example, did you run apexins.sql?
It's important to follow the documentation. The script you are running to change the admin user password should not be run until after the Apex installation is complete.
--Keith Malay

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

What are the Admin Parameters in Weblogic server?

What are the Admin Parameters in Weblogic server?

Hi,
Can you explain what specifically are you looking for? Are you looking for parameters to weblogic.Admin command or something else?
Anil

InitialContext.unbind() deleted the admin user for LDAP server...

Hi,
I am doing a connection to a LDAP server from Java code. Everything was fine for several days. But today I noticed that I don't execute an unbind operation and decided to put the necessary code. So I used InitialContext.unbind(). The result was that on the first execution of my program everything was OK. But on the second execution I was not able to bind to the server at all with the constructor of InitialLdapContext class even after restarting the machine from which I execute the Java code and the machine with the server. So it went that the admin user I was using for bind and unbind credentials was deleted. I am sure that the unbind() method is causing the problem because I actually broke the two LDAPs that I have (testing referrals...).
Now I use close() method instead of the unbind() method and everything is OK but I wonder how is this possible and why is it not documented?

I can't imagine documenting something like "This method will delete the admin user from your server". If that's the case then it's a bug, not something to be documented. Report it to whoever wrote your Java implementation. If that's Sun, then here:
http://bugs.sun.com/bugdatabase/login.do
You might also want to look into your LDAP server and see if it's a known bug there.

I accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

What is the "admin" user in EAS Console?

Similar Messages

Maybe you are looking for