What is the advantage of going for ERP6.0 Ehp 7

Dear all,
I just want to know what will be advantage of going for ECC6.0 Ehp 7
Recently done one implementation with Ehp5 .
now my project managers wants to get the difference and what will be the Ups and Down if we go for Ehp7 for the next implementation
I am SD consultant so Not sure where to look for i tried some links
SAP Solution Browser
But not able to understand much since it says about all module .
anything short i can read so i can explain to my manager about it please let me know
it will be useful
Not sure where to post this discussion so please move if it is in wrong place
Regards

Hi Suresh,
Please find below links
1865866 - SAP EHP 7 for SAP ERP 6.0 - Release Information
https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000762950&_SCENARIO=01100035870000000202
Thanks
siva

Similar Messages

What are the advantages and disadvantages for the larger blocksize and for

What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?

Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks.

I currently have a Macbook pro 10.6.8 and i'm interested software upgrade What are the advantages and disadvantages for upgrading my software.

Ok... the only reason why i want to uprade my software is because of StarCraft 2. For those that don't know, Heart of the Swarm is coming out this March. I've been eagerly waiting for this expansion. I just read that SC2 HOTS will not be able to support any software below lion. I currently have 10.6.8 and i was wondering what are the disadvantages and advantages (aside from being able to play this expansion) of upgrading my software? Are there any draw backs, etc.

Go all the way to Mountain Lion if you can...
Upgrade to Mountain Lion
But...
Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)
Also, get more RAM...
You can use this Link to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP http://support.apple.com/kb/ht1270

HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be) downloading my work.

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

What is the advantage of exporting mpeg-dvd vs mpeg for dvd if mpeg does not need to transcode audio

What is the advantage of exporting mpeg-dvd vs mpeg for dvd if mpeg does not need to transcode audio and also burns to dvd?

The MPEG2-DVD preset also produces a DVD spec-legal file. If you use the generic MPEG2 preset, you can too easily create an out-of-spec file that will have to be re-transcoded by En.
Jeff

What are the advantages to using BlazeDS or Granite?

We have decided to use Flex3 to upgrade our UI. We have heard
good things about using Granite Data Services, but it requires jdk5
or higher, and the same for BlazeDS.
We are currently using Websphere 6.0 and are discussing our
environment options: replace Websphere with JBoss 4.2 (Sun jdk6),
upgrade to Websphere 6.1 (IBM jdk5), or keep the current Websphere
6.0 (IBM jdk4). The concerns are upgrade cost, and time to develop
and qa any changes to the environment.
We would like to get some feedback on pros and cons of using
Flex with these three environments. If we stay with jdk4, will we
spend nn% more time writing code that could have been done out of
the box with Granite? Are there improvements with memory, speed,
etc. using Flex with a later version of the jdk? Will development
time be shorter with a later version of the jdk? What are the
advantages and disadvantages of using Flex with WebSphere versus
JBoss?
Thanks for your input!

BBM and PIN messages are messages sent from one BlackBerry to another. The message is composed by the sender and goes through RIM's secure server before being delivered to the recipient. They are only available to BlackBerry users.
The thing I like about them is how you can see if they've been received by the recipient. Once the message reaches the recipient's phone, you'll notice a small 'D' at the start of your message. This means it's been delivered. When the recipient opens the message, that 'D' will switch to an 'R', for 'read'. So now you know that it's actually been received by the recipient.
One more great thing about these messages is that there is no limit to length. As you're probably aware, most carriers limit text messages to 160 characters; not so with these messages, they can be much longer.
BBM and PIN messages are the same type of message, but with PIN messages you're limited to just that one contact receiving it. With BBM, you can have many contacts in on a chat or you can broadcast a message to many contacts at once.
I hope that explains things for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

What are the advantage of using Oracle Database when compare to SQL SERVER

Hi all
Please tell anyone about
what are the advantage of using Oracle Database when compare to SQL SERVER
Thanks in advance
Balamurugan S

user12842738 wrote:
Hi,
There are various differences between the two.
1. SQL Server is only Windows, but Oracle runs on almost all Platforms.
2. You can have multiple databases in SQL Server, but Oracle provides you only one database per instance.Given that the very term 'database' has s different meaning in the two products, this "difference" is absolutely meaningless.
3. SQL Server provides T-SQL for writing programs, whereas Oracle provides PL/SQLWhich means what? Both products have a procedural programming language. They named them differently, and the languages are not interchangeable. Means nothing in comparing the features/strengths/weaknesses/suitability to purpose.
4. Backup types in both are the same. (Except Oracle provides an additional backup called Logical Backup.)You make that sound like "Logical Backup" is something more than it is. It is nothing more than an export of the data and metadata. Many experts don't even consider it a backup. I'm sure SQL Server provides the same functionality though they probably call it by some other name.
5. Both provide High Availability.Well, I guess they both have a suite of features they refer to as "High Availability". But what does that really mean? The devil is in the details. Remember, the two products don't even agree on what constitutes a "database".
6. Both come in various distributions.???
>
If you are going for an Implementation, you can try SQL Server Express Edition and Oracle XE which are free to use.
Then you can choose whichever is comfortable for your needs.
Thanks.

What are the advantages to using Pin to Pin and BBM?

I haven't used BBM yet, but have been composing and sending messages Pin-to-Pin (peer-to-peer). Is that the same thing as using the BBM and what are the advantages of each? Are they better than just texting? Would appreciate an explanation, because I'm confused! Thanks!!
Solved!
Go to Solution.

BBM and PIN messages are messages sent from one BlackBerry to another. The message is composed by the sender and goes through RIM's secure server before being delivered to the recipient. They are only available to BlackBerry users.
The thing I like about them is how you can see if they've been received by the recipient. Once the message reaches the recipient's phone, you'll notice a small 'D' at the start of your message. This means it's been delivered. When the recipient opens the message, that 'D' will switch to an 'R', for 'read'. So now you know that it's actually been received by the recipient.
One more great thing about these messages is that there is no limit to length. As you're probably aware, most carriers limit text messages to 160 characters; not so with these messages, they can be much longer.
BBM and PIN messages are the same type of message, but with PIN messages you're limited to just that one contact receiving it. With BBM, you can have many contacts in on a chat or you can broadcast a message to many contacts at once.
I hope that explains things for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

What are the advantages of a solid state drive?

I was considering upgrading to a solid state drive in my Mac Mini, but was wondering what all the advantages are. Does it mainly deal with boot times, or does it actually make programs run faster? The reason I ask is most videos I see only show boot times, and also I was under the impression that once a program is up and running it uses RAM to operate more than it does the hard drive.
So is a Solid State Drive worth it in terms of speed, beyond just boot times?
Thanks in advance for any insight.

The Fusion Drive that came in my Mac Mini from the factory is a combination of a 128GB SSD and 1TB HD, but OS X treats the two as a single device. OS X has long had a feature where the most active files are moved to that part of the drive that has the fastest access times. That offered some improvment in disk I/O. In the case of the Fusion drive, the fast part of the drive is de-facto the SSD portion of the combination. In theory the Fusion Drive provides the speed of an SSD with the relatively low cost capacity of the HD. In practice, and after some runtime experience where the OS measures file activity and moves the most active files to the SSD there is an obvious improvement in overall system performance and the cost is bearable.
Kevin Fromcamarillo mentioned the OWC upgrade and IMO it is a good one. There are articles around that will tell you how to format and configure an SSD and HD to be a Fusion drive. I have not tried that so I cannot say whether it is as good as the Apple factory Fusion drive or not. Personally I think the Fusion drive concept is like a hybrid automobile. An intermediate step until technology brings the cost down and capacity up enough to make them fully competitive. That time is coming sooner rather than later. Notice Appe is not even offering HDs on some models and instead going to all SSD. I don't think it will be too long before I am tryng to move my Fusion drive into an external enclosure and replacing it with a high capacity SSD.
A caveat with the Fusion drive. If you use third party volume repair and maintenance utilities, be absolutely sure the version you hvae is certivied compatible with a Fusion drive. Even when apps are certified compatible, that compatibility may not indlude all of their functions.

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What is VIEW in Database table what is the advantage

Hi:
I would like to get your opinion on what is the advantage of Table VIEW?
I read a note saying it is all about simplifying Query.
But when you come to XMLTYPE where there is only ONE ROW and NO COLUMN,
How do you create XMLVIEW for a large XML files?
Please help
Ali_02

Overview of Views
Read here...
http://download.oracle.com/docs/cd/E11882_01/server.112/e10713/schemaob.htm#i20690
XMLView or XMLTYPE ?
Overview of XML in Oracle Database
Read here...
http://download.oracle.com/docs/cd/E11882_01/server.112/e10713/cncptdev.htm#CNCPT1535
Edited by: ordba on Mar 4, 2010 9:50 AM

What is the advantage of using IB to create XIBs/Class Objects over coding?

Hi all,
I hoping someone can provide me some pros and cons as to when I should use IB to create XIBs and/or class objects as opposed to directly coding them.
For example, if I choose Apple's Template for creating a Navigation Based Application (cocoa touch), the project creates two NIB files - MainMenu and RootViewController.
However looking at one of demo apps SimpleDrillDown, it does not have a RootViewController XIB and instead creates it via code.
Another example from the same two apps is that the template generates a "Navigation Controller" class object in the Mainmenu.xib. SimpleDrillDown does not bother with this in the XIB, but uses code to generate the controller:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Create the navigation and view controllers
RootViewController *rootViewController = [[RootViewController alloc] init];
UINavigationController *aNavigationController = [[UINavigationController alloc] initWithRootViewController:rootViewController];
self.navigationController = aNavigationController;
[aNavigationController release];
[rootViewController release];
// Configure and show the window
[window addSubview:[navigationController view]];
[window makeKeyAndVisible];
as opposed to the template which only needs this:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Configure and show the window
// Navigation Controller is defined in MainWindow.xib
[window addSubview:[navigationController view]];
[window makeKeyAndVisible];
So what are the advantages of each approach. Why does apple suggest one approach and yet all its demos use another.
Any thoughts, answers gratefully received.
TIA, Michael.

You can do whatever you're comfortable with, but most of the best Cocoa programmers--the ones on the Mac, I mean--recommend putting everything you can into Interface Builder.
It's a little like the difference between writing a program to do a bunch of financial calculations and using a spreadsheet. Yeah, the program can do everything the spreadsheet can--and more besides--but you'll find it far easier to create, use and modify the spreadsheet.
Interface Builder takes away a lot of completely meaningless choices ("What order should I create the objects in? How should I name the variables? How should I create their frames? What order should I set the attributes in?"), leaving you with an interface optimized for creating and arranging objects, and allowing your code to focus on what you really do need to think about--your application's logic.
(By the way--part of the reason Apple's demos don't all use Interface Builder is that the very first SDK releases didn't have it. Back then, you had to create all your views programatically. Believe me, I have no wish to go back to setting autoresize masks manually. Now get off my lawn, whippersnapper.)

What are the advantages of compressor and it it even necessary

what are the advantages of compressor and it it even necessary?

Necessary for some and not for others – probably a large majority – who can by with the presets avalaible in FCX.
The users who need Compressor are those who want to control the parameters of the encodes to get the best possible trade-off between file size and quality. Or those who want to do things like standards conversions, complex frame speed changes, better re-scaling capabilities, de-interlacing, re-interlacing, output formats beyond which are available in FCX, chapter markers for DVD and Blu-Ray authoring, batch conversions for multiple purposes through droplets, access to clusters for faster rendering.
Russ

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What is the advantage of going for ERP6.0 Ehp 7

Similar Messages

Maybe you are looking for