What is the affect of restarting the DFS Namespace Service? (Will users be affected if it is restarted on all DFS servers?)

Please advise..
Thank You

When clients get a DFS referral, it will be stored in cache for a while for saving network cost. The default time-out is 1800 seconds.
DFS has failover if more than one namespace server is added. However if all namespace servers are restarting in the same time, users will fail to find a namespace server so they will not able to get a folder target if there is no cache stored on client side.
If you have any feedback on our support, please send to [email protected]

Similar Messages

  • What is the use of service entry sheet in plant maintenance module.

    Hi Expert,
    I want know about, What is the use of service entry sheet in plant maintenance?
    Regards,
    Ram Rathode

    Hi dear,
    Service entry sheet concept is used in all the modules.
    Service entry sheet is created to do the service confirmation and to pay the vendor for the services which he has performed.
    Based on the service entry sheet invoice is booked by Finance.

  • What is the difference between Service and Component

    What is the difference between Service and Component?

    Generally, the implementation of a service will be comprised of many components, each of which will be comprised of many objects.
    Services should correspond to cohesive collections of use cases (eg an online bank), components are at a finer granularity (eg a table of numbers).
    Pete

  • I am purchasing a laptop with a 4k screen (3200x1800) resolution, will Lightroom work at these levels? what is the highest resolution LR will support?

    I am purchasing a laptop with a 4k screen (3200x1800) resolution, will Lightroom work at these levels? what is the highest resolution LR will support?

    As Rob has pointed out there is no maximum resolution that LR supports, but performance decreases as resolution increases. I'm using an i7-860 quad core system with a 1920 x1080 (2.1 Megapixel) monitor and LR runs well. A 3200 x1800 (5.8 Megapixel) monitor will require ~2.75 x more processing to render the real-time loupe image in the Develop module. Some people have reported sluggish screen updating when making adjustments in the Develop module with even lower resolution monitors such as 2560x1440. Here's a post that discusses the issue:
    The Achilles heel of 4k monitors on the Mac Pro?

  • What is the strongest iPad that will work in New Zealand and Australia?  What is the cost plus tax, please?

    What is the strongest iPad that will work in New Zealand and Australia.  What is the cost including tax, please?  Can I purchase this at the Brea, California Apple shop?

    You can see the American retail prices on the Apple website. If you look at 3G, make sure not to get the Verizon model, as it won't work outside of the US.
    Otherwise, sales taxes are different from jurisdiction to jurisdiction, so you'll have to Google to find out the local sales tax in Brea as well as the California state sales tax.

  • What's the best wireless service to use?

    Hello!
    My client would like to know what's the best unlimited service plan (Verizon? AT&T? T-Mobile?) to get for wireless Internet on his MacBook Pro (Mac OS X 10.5.5; Leopard). Do they have devices with USB and card with the antenna? I don't know how well these providers support Apple computers. It would be nice if it has PC support too to use between laptops/notebooks if needed.
    This is important if there is no wifi, remote locations, etc. Also, prices are not an issue, fast speeds, and no caps are recommended. It should be similiar to his Palm Treo 680 smartphone, but it is very slow so hopefully the ones for MacBook Pro won't be slow.
    Thank you in advance.

    scb wrote:
    It is my understanding that at present, no more unlimited plans exist. The Aircards (PCMCIA, Express, or USB) do work for OS X. That will not be an issue. The speeds are not good. They are barely 2-4 times modem speeds, at best, and under the best circumstances. The cards will be free, but expect $60/month for the top services.
    Note: Sprint may have an All-for-one plan that will allow your cell phone to be used as a modem, if your cell supports that. This will cost $99. I am not certain about this.
    I am not sure how that works with a Treo 680 (a smartphone) that already has Internet and it's slow too (guess 2-4 times as well?).

  • What is the permission to restrict end user to use Report builder

    Hi experts,
     What is the permission to restrict send user to user report builder in SSRS?
    Thanks

    Only member of the role "Report Builder" can use the Report Builder to create reports:
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • What is the accounting entry that will be generated

    Hi Experts,
    What is the accounting entry that will be generated when:
    1. Vendor Invoice is created in system
    2. Vendor Invoice is cleared using F110 (APP)
    Regards.

    Hi,
    1. Vendor Invoice is created in system
    During Goods Receipt
    Stock Account               Dr
    G/R I/R Accoun                Cr
    Freight clearing account               Cr
    Other expenses payable               Cr
    During Invoice Verification
    G/R I/R Account              Dr
    Vendor                   Cr
    2. Vendor Invoice is cleared using F110 (APP)
    Accounting entry at the time of payment
    Vendor account               Dr
    Main Bank account              Cr
    Regards,
    Akhila.

  • Please explain what are the various procedures to find user-eixts

    Hi,
    Please explain what are the various procedures to find user-eixts ?
    Ramana

    Hi,
    1. By executing this Program.
    *& Report  ZFIND_EXIT
    REPORT  ZFIND_EXIT.
    *report zbadi_find .
    tables : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode,
    p_pgmna like tstc-pgmna .
    data wa_tadir type tadir.
    start-of-selection.
    if not p_tcode is initial.
    select single * from tstc where tcode eq p_tcode.
    elseif not p_pgmna is initial.
    tstc-pgmna = p_pgmna.
    endif.
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name eq enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    select * from tadir into table jtab
    where pgmid = 'R3TR'
    and object in ('SMOD', 'SXSD')
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(105) sy-uline.
    format color col_heading intensified on.
    Sorting the internal Table
    sort jtab by object.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type c.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    loop at jtab into wa_tadir.
    at first.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Enhancement/ Business Add-in',
    41 sy-vline ,
    42 'Description',
    105 sy-vline.
    write:/(105) sy-uline.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    format color col_group intensified on.
    write:/1 sy-vline,
    2 wf_object2,
    105 sy-vline.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    select single modtext into wf_txt
    from modsapt
    where sprsl = sy-langu
    and name = wa_tadir-obj_name.
    format color col_normal intensified off.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single text into wf_txt
    from sxs_attrt
    where sprsl = sy-langu
    and exit_name = wa_tadir-obj_name.
    format color col_normal intensified on.
    endcase.
    write:/1 sy-vline,
    2 wa_tadir-obj_name hotspot on,
    41 sy-vline ,
    42 wf_txt,
    105 sy-vline.
    at end of object.
    write : /(105) sy-uline.
    endat.
    endloop.
    write:/(105) sy-uline.
    skip.
    format color col_total intensified on.
    write:/ 'No.of Exits:' , wf_smod.
    write:/ 'No.of BADis:' , wf_badi.
    else.
    format color col_negative intensified on.
    write:/(105) 'No userexits or BADis exist'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(105) 'Transaction does not exist'.
    endif.
    at line-selection.
    data : wf_object type tadir-object.
    clear wf_object.
    get cursor field field1.
    check field1(8) eq 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    when 'SXSD'.
    set parameter id 'EXN' field sy-lisel+1(20).
    call transaction 'SE18' and skip first screen.
    endcase.
    2. . Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    3. 1. in se11, goto table MODSAP
    View table contents
    in Type field, enter
    'E' (for user exit / Function Exit)
    OR 'S' (for screen exit)
    4. Calling Customer- fucntion in Main Program
    Thanks,
    Anitha

  • What is the "Imported Namespaces" window in Visual Studio Project Properties (VB)

    What is the "Imporeted namespaces" window (see below) in Project properties (VB)

    Hi trogan,
    This is the official document Description from
    How to: Add or Remove Imported Namespaces (Visual Basic):
    Imported namespaces are managed on the References page of the Project Designer. The imports you specify in this dialog box are passed directly to the compiler (/imports) and apply to all files in your project.
    But I think we could understand it better with this document:
    References and Namespaces in VB.NET
    Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft does not control these sites and has not tested any software or information found on these sites;
    Therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What is the Oracle 10g services in client-side use?

    What is the Oracle 10g services in client-side use?--------No188

    Hi,
    Don't you think that including the question number tips-off people that this is course work?
    Anyway, Google can be very helpful for finding answers to your Oracle questions. Check this out:
    http://www.dba-oracle.com/t_google_keyword_searching.htm

  • What is the billing customer service phone number?

    what is the billing customer service phone number?

    Hi drums60,
    Please Contact Adobe Support and they will help you.
    Please Dial in : 1-800-833-6687
    Or
    you are also welcome to contact our support team at http://adobe.ly/yxj0t6

  • What is the Microsoft toll that will check in sharepoint server for updates

    Hi
    what  is the Microsoft toll that will check in sharepoint server
    which package  will need update or not
    and it will tell updates and patches need or not
    adil

    This is entirely handled by Windows/Microsoft Update built into Windows itself.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What is the difference between Service Station and Tempro?

    Searched for information on this but haven't been able to find it:
    What is the difference between Service Station and Tempro?
    I have just run the Toshiba Upgrade Assistant and it has installed Service Station but Tempro is already installed and seems to do the same thing.
    Regards
    Bushy

    Hi
    Both tools are from Toshiba an notifies you about the new driver updates available on the Toshiba driver page.
    As far as I know Tempro is little bit older than the Service Station.
    Furthermore the Service Station seems to provide a little bit more options and features as Tempro tool.
    However, i recommend using only one Utility my favorite is Service Station

  • WHAT IS THE DEFAULT PASSWORD FOR GUEST USER

    what is the default password for guest user?

    There is no default password for a guest user unless you've created one:
    (screenshot from the System Pref Guest User Pane)

  • No matter how many times I start itunes on my pc I have to agree to the terms of service gain and when it does open my settings have all been changed.  why is it doing this and how can I satop it?  reinstalling does not fix it.

    No matter how many times I start itunes on my pc I have to agree to the terms of service again and when it does open my settings have all been changed.  Why is it doing this and how can I stop it?  Reinstalling/repairing does not fix it.

    McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
    Or it could be an issue with the SC Info folder. See TS1277 - iTunes: Missing folder or incorrect permissions may prevent authorization for details.
    Or a repair install of iTunes from the Programs and Features control panel might fix the problem.
    tt2

Maybe you are looking for