What is the aluminum alloy used into iPhone 6/6 Plus design ?
Hello,
I don't have any problem with my iphone but I have a technical question.
According to the making process, I want to know what is the aluminum alloy used and different applied treatments on iPhone 6/ 6 Plus case design.
Please, it will be very enjoyable for me to discover it.
Thanks a lot.
Pitou.
Hmmm okay,
I hoped there would be some experts here.
Similar Messages
-
What is the fingerprint matcher used in iPhone 5S?
Its totally a good and gigantic which will play as a role model in the field of biometrics... But security and access based fingerprints depends on two important features, the sensor and the matcher. I am pretty satisfied reading reviews about the sensors and its capabilities but as a szduent of biometrics, I am very much interested in the matching algorithm used. Would be if someone would shed some on this?
It helfend me tremendously to Switch off SIRI - everything Else Kept on prolonged the standby from 4-6 hrs to almost 2 days ...
-
What are the terms of using your iPhone with Enterprise Networking?
Do you have to purchase any licenses? Is it as cut and dry as it seems, or are there any underlying costs, or procedures?
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
What is the best external battery for iphone 4s
what is the best external battery for iphone 4s
I bought the Mophie juice pack™ powerstation from the Apple store for $80. It has more then enough power to quickly boost the charge on my iPhone4S to an acceptable level. It requires the standard 30pin/USB Apple cord to plug into it.
But unless you need to charge your phone from 5-100%, this battery is overkill. It's a real hassle having the Apple cord connected to your phone whilst there's a battery in your pocket and you end up looking quite strange with your "corded" smartphone.
I might recommend a battery case (Mophie has these), but they don't offer the protection that I need (I use a LifeProof case). Instead I would buy a smaller Mophie juice pack™ reserve (keychain, direct plug) to get out of a bind and then charge up your iPhone in the car, wall, airplane, etc.
My only concern with the above (direct plug batteries) is that the slightest bump and the battery becomes a lever that could break the 30 pin plug on your phone, just like that warily flimsy feeling when you put an iPhone in a dock.
Hope that helps, at least in the Mophie department! -
What are the advantage of using a passive monitoring technique ?
What are the advantage of using a passive monitoring technique
Hi Plawansai,
I saw your question that is still unanswered.
I believe an advantage of using a passive monitoring technique is that it won't interfer with live traffic, as it does not inject traffic into the network or modify the traffic that is already on the network.
One drawback anyway, is that post-processing time can take a large amount of time with passive monitoring!
A combination of the two monitoring methods seems to be the route to go.
V. -
What is the advantages of using Flexconnect groups
what is the advantages of using Flexconnect groups in WLC?
Reg,
Ezra.Pls refer this document for more detail about these features
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch7_HREA.html#wp1091114
FlexConnect is one mode an AP can operate, typically deployed in Branch setup where you do not have a controller at branch site. Those AP can register to a controller at your HQ or main site. So traffic will terminate at your branch switch instead of tunnel back to HQ-WLC.
If you want roaming within your branch FlexConnect AP then you have to put those AP into a FlexConnect Group. Then only key information shared among those AP to facilitate fast roaming.
Pls do not forget to rate our responses if you find them useful.
HTH
Rasika -
Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer -
WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto? thank you.
ingridlisa,
I'd suggest to ask them to create Shared PhotoStreams and to invite you to view the streams, see:
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Added:
that I'll be putting in my iphoto?
Will you be collecting the photos in iPhoto on your iPhone or on a Mac? On a Mac a Shared PhotoStream requires Mac OS X 10.8.2. -
Wiki or Robohelp - What are the benefits of using a wiki vs publishing projects in robohelp?
What are the benefits of using a wiki vs publishing projects in robohelp? I currently use RH9/RH9 Server and publish multiple SSL. The company is looking to stop using Robohelp and replace our online help authoring tool (RH) with a wiki. Are there any benefits of going to a wiki environment. What RH features/functions that I have today will i not have by having IT import our robohelp files into a wiki?
I know that a wiki is not an authoring tool, but someone must think it is and we'll still have all the functionality of publishing multiple SSLs, reports, etc once in the wiki environment. Any comments - is this the best route?Hi,
There are many differences. The idea of a wiki is to allow anyone to view and/or edit the content. Depending on the wiki system, you can set access control for viewing and editing.
Wiki's typically have simple syntax (html in a wiki is a serious security risk), allow image embedding, links and attachments. You will need to learn the specific syntax (rather easy, but also very limited).
What will you lose? This depends on the features available in the wiki system as well as the available plugins. A few downsides:
- WYSIWYG editor limited, if at all.
- No snippets
- No variables
- Dropdowns (may be possible through plugins)
- Index
- Styling based on css classes (mostly supported through HTML which is a security concern)
- Only one version of your support system: multiple versions require multiple installations/configurations.
- No searching in attachments.
- No CBT (Though some wiki's allow comments in the wiki code)
- No Word/FrameMaker import.
- You have to create your own CSH calls.
On the upside:
- Most wiki systems are free, even for commercial use.
- The syntax is quite simple, allowing you to quickly write text.
- Wiki's typically offer good support for syntax highlighting.
- They are very easy to set up.
- Most wiki's have plugins to enable comments.
The greatest downside in my opinion is that you always have the latest version of all files. Whenever you update a page, everyone immediately has the latest version. And if you want to create help for a feature that isn't released yet, you will have to use access control to make sure not everyone sees the (unfinished) help for the unreleased feature. With RoboHelp you have a single source that creates a one way output.
We use both RoboHelp and wiki's: RoboHelp for customer help and wiki internally to share knowledge. And sharing knowledge is what wiki's are designed for.
Greet,
Willam -
What is workflow ? What are the advantages of using workflow? What are the
what is workflow ? What are the advantages of using workflow? What are the steps for building a workflow ?
Hi Leela,
Your question is very straight question.
Better u can follow these links.
http://www.esnips.com/doc/90b7763b-f9d9-4861-a273-04674b9fe3f2/Workflow
http://www.esnips.com/doc/991843e0-8686-4949-94b9-f45d90081b22/workflow
And i'll give some theory answer for ur questions
i.e.,SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
SAP provides several workflows that map predefined business processes. These workflows do not require much implementation. For an overview of these SAP workflows, refer to Workflow Scenarios in Applications.
Integration
SAP Business Workflow uses the existing transactions and functions of the R/3 System and does not change the functions. You can combine the existing functions of the R/3 System to form new business processes with SAP Business Workflow. The workflow system takes over control of the business processes. If you are already using SAP Organizational Management, you can use the organizational structure created there to have the relevant agents carry out the individual activities. It is possible to have an activity carried out by a position. This ensures that the respective occupiers of the position can carry out the individual activities during execution of the workflow. This means that personnel changes in your organization are taken into account immediately in the execution of a workflow.
Features
SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
The end user receives information about the activities they are to carry out in their Business Workplace. This provides them with a central overview of all the activities that they are authorized to carry out. They can commence the activities from here.
Several tools are available to the workflow system administrator, with which they can control and analyze the current workflows. The workflow system administrator is notified of problems automatically by the system.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Rewards if it is useful. -
What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi ?
I am modifying an existing workspace for a new product, and it seems like more work to add the vi's into a LabVIEW project
does it gain anything in the long runHi Rusty,
I wanted to quickly clarify on the integration between TestStand and LabVIEW Projects.
As Jeff mentioned, some of the big benefits of using LabVIEW Projects is to organize code and to namespace them.
For instance if you had a project called "Power Supply" that housed all your power supply code and had a VI in that called "Initialize", and another project called "Temperature Chamber" that also had a VI called "Initialize", both these VIs are namespaced by the project, so there is no longer confusion about which "Initialize" VI is being used.
Now from a TestStand point of view, in prior version of TestStand, we lost some of this benefit because TestStand did not know about TestStand projects and called VIs simply as un-namespaced VIs. However, in TestStand 2010 (released last year, free eval available at ni.com/teststand), we added the ability to (optionally) call VIs within the context of their projects. This means that:
VIs are now namespaced by their project, even when called from TestStand
VIs can use project specific constructs like NI-DAQmx tasks and conditional compilation settings
Note: When creating deployments, the VIs maintain their projects and namespacing, so this benefit holds true for deployments as well.
Additionally, someone had mentioned looking into using lvlibs to namespace your VIs for deployment. Two comments:
With TestStand 2010, this is no longer neccessary since the project itself namespaces the VIs
You might also want to look into LabVIEW Packed Project Libraries, which combined several VIs into a single file. Think of it as a DLL specific to LabVIEW that is as easy to call as normal LabVIEW VIs. TestStand 2010 can call VIs that are exposed by PPLs. In addition, the deployment utility can automatically pack your VIs into PPLs for deployment.
Hope this is helpful!
Jervin Justin
NI TestStand Product Manager -
What is the advantage of using badi in infospoke?
Hi all,
Can anyone let me know when shall we use badi along with infospoke. if we apply so, then what is the advantage of using badis in infospoke.
thanxs
harithaHi,
BADIs will come into picture where you want to do some messaging (manipulations)on data before downloading.
For eg while downloading the sales data you want to fetch billing data from billing related infoproviders , put a look up on billing info providers and update the sales data with billing info in BADI.
hope it helps..
regards,
raju -
What is the advantages of using Interface?
Hi,
I still don't get what's the advantages of using interface. Reusability? is it the main advantage? thanks in advance.What is GOF?
Interface is a good program practice when working with RMI (Remote Method Invocation) application. Imagine your anti-virus. When you connect to internet your software invoke a method into your software vendor site and download the new definitions. Now every anti-virus Subscription is different. The method you invoke, will depends on your Subscription. If you hard code the method abstractly, you will not achieve this functionality.
Another concept is that because Java does not practice multile inheritance interface is a goog way to interface into another class.
Example
I want to extends to multiple class which java do not support. I will write an interface i.e I want to extends to FileOutputStream, OutputStream, Object, Integer, String, ActionEvent, Window etc.
I will write an interface like this
interface MyClass {
pulic void setFileOutputStream ( FileOutputStream file );
public void setOutputStream ( OutputStream );
public Object getObject ( );
public Seriable getInterget ( )
------------------- //You get the gist
With this interface you can implement they behaviours
You could say, why don't we just import them. When yo import them you have already hard coded there behaviour. But this way you can apply diferent behaviour throughout you application development. And any class that implement them must provide ways of using it. -
What are the function modules used in CRM_ORDER_STATUS
Hi,
what are the function modules used in CRM_ORDER_STATUS(BADI) IN THIS METHOD AFTER_CHANGE...Hi,
http://scn.sap.com/thread/3202739
AFTER_CHANGE
ABAP ABAP Code
Follow-Up Action After Status Change
BEFORE_CHANGE
ABAP ABAP Code
Checks for Status Changeability
Sample code to set date on status change ------
INCLUDE crm_direct.
DATA : ls_status TYPE crmt_status_wrk.
DATA : lv_process_type TYPE crmt_process_type.
DATA : lit_appointment TYPE crmt_appointment_wrkt.
DATA : wa_appointment TYPE crmt_appointment_wrk.
DATA : ls_appoint TYPE crmt_appointment_com.
DATA : lt_appoint TYPE crmt_appointment_comt.
DATA : ls_input_field TYPE crmt_input_field.
DATA : lt_input_field TYPE crmt_input_field_tab.
DATA : ls_fieldnames TYPE crmt_input_field_names.
DATA : lt_fieldnames TYPE crmt_input_field_names_tab.
DATA : lt_exception TYPE crmt_exception_t.
DATA : lv_timestamp TYPE sc_tstfro.
DATA : lt_header_guid TYPE crmt_object_guid_tab.
DATA : lt_req_objects TYPE crmt_object_name_tab.
ls_status = is_status_wrk.
*Get process type
CALL FUNCTION 'CRM_INTLAY_GET_PROCESS_TYPE'
EXPORTING
iv_orderadm_h_guid = ls_status-guid
IMPORTING
ev_process_type = lv_process_type.
* Check process type
IF lv_process_type = 'ZZZ'.
INSERT ls_status-guid INTO TABLE lt_header_guid.
INSERT gc_object_name-appointment INTO TABLE lt_req_objects.
**Get appoinment data
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_header_guid
iv_mode = gc_mode-display
it_requested_objects = lt_req_objects
IMPORTING
et_appointment = lit_appointment
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
IF sy-subrc NE 0.
EXIT.
ENDIF.
*read item level data
READ TABLE lit_appointment INTO wa_appointment WITH KEY ref_kind = 'B'.
IF sy-subrc = 0.
* *Time-stamp set to as per current date and time.
CONVERT DATE sy-datum TIME sy-uzeit INTO TIME STAMP lv_timestamp
TIME ZONE sy-zonlo.
*Fill appoinment structure
ls_appoint-ref_guid = wa_appointment-ref_guid."appoinment gid
ls_appoint-ref_kind = 'B'."Item
ls_appoint-ref_handle = '0000000000'.
ls_appoint-appt_type = 'ZSERV_CLOSE'."c_appt_type .
ls_appoint-timestamp_from = lv_timestamp.
ls_appoint-timezone_from = 'GMTUK'."time zone
ls_appoint-mode = ''.
ls_appoint-rule_name = 'TODAY'.
INSERT ls_appoint INTO TABLE lt_appoint.
ls_input_field-ref_guid = wa_appointment-ref_guid.
ls_input_field-ref_kind = 'B'.
ls_input_field-objectname = 'APPOINTMENT'.
ls_input_field-logical_key = 'ZSTATUS_NEW'.
*Fill input fields
ls_fieldnames-fieldname = 'TIMESTAMP_FROM'.
INSERT ls_fieldnames INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_field.
CLEAR lt_fieldnames[].CLEAR ls_fieldnames. CLEAR ls_input_field.
*To update date
CALL FUNCTION 'CRM_APPT_MAINTAIN_MULTI_OW'
EXPORTING
iv_ref_guid = wa_appointment-ref_guid
iv_ref_kind = 'B'
it_appointment_com = lt_appoint
CHANGING
ct_input_fields = lt_input_field
EXCEPTIONS
OTHERS = 1.
ENDIF.
ENDIF.
Standard BADI Order_Save will take care to save into database.
Regards,
Sumeet -
What are the different functions used in sap script?
Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Maheshhe print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'.
Maybe you are looking for
-
Is there a dock for the iPad third generation that you can use the remote with?
-
Hi please forword this massage I have a problem whith paid registration When i did check and bought 2 ringtones i paid her Yesterday but amount taken off my card and i do not know why If you have a subscrition to someting please delete ann just qh
-
Can't find Dock after installing 10.6.7 update
THis happen to anyone else? What do do? Worked fine before. I restarted and that did not bring Dock back.... Two days ago I started working with Spaces on f8 key but that did not seem to stop access to Dock; problem only started when I installed the
-
Can doc properties be in sync with a page size change?
I am using the manual.indt template with InDesign CS4, I made a page size change to the template and now the text boxes and everythng else are knocked out of alignment. I need the margins to be 'correct' in relation to the page size, just as they wer
-
Automatic Source determiantion
Dear Guru, During Automatic source determination, the logic to find the source of supply sequence is Quota arrangement Source list Outline agreement and info record Source Determination - Purchasing (MM-PUR) - SAP Library My doubt is whether the abov