What is the Analog Ouput FIFO size of the LAB PC 1200 ?

Hello,
does anyone know what is the Analog Ouput FIFO size of the LAB
PC 1200 ? I can't find anything in the documentation nor with "Get DAQ
device information" vi.
Thanks.

The Lab PC 1200 does not have an analog output FIFO.

Similar Messages

Is it possible to open iPhoto twice under os-x lion to create a photobook on one desktop and to have a look to the photos in full size on the other desktop?

Is it possible to open iPhoto twice under os-x lion, to create a photobook on one desktop and to have a look to the photos in full size on the other desktop?

Ok let me ask you IF the IT department of your workplace does NOT want OS X installed on "THEIR" (The Companies) computers because of what they think is some type of security issue why are you trying to go against their wishes and install OS X on a computer that is NOT owned by you.
That could cost you your job.
If you continue down this path you will screw up the Windows install and have to take the system back to the IT department to get it fixed. What do you think they will say at that point?
Do as you like but you would be better off just buying your own Mac computer if you are set on using OS X as your personal operating system.

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

I need help with event structure. I am trying to feed the index of the array, the index can vary from 0 to 7. Based on the logic ouput of a comparison, the index buffer should increment ?

I need help with event structure.
I am trying to feed the index of the array, the index number can vary from 0 to 7.
Based on the logic ouput of a comparison, the index buffer should increment
or decrement every time the output of comparsion changes(event change). I guess I need to use event structure?
(My event code doesn't execute when there is an event at its input /comparator changes its boolean state.
Anyone coded on similar lines? Any ideas appreciated.
Thanks in advance!

You don't need an Event Structure, a simple State Machine would be more appropriate.
There are many examples of State Machines within this forum.
RayR

How do I access all the Arturia 49 key analog library to Garage Band? I see the analog library but not all the SW instruments?

how do I access all the Arturia 49 key analog library to Garage Band? I see the analog library but not all the SW instruments?

Alex,
have you tried everything in this thread? The problem seems to be different for everybody:
If nothing helps try dagon's full monty for a reinstall:
Re: GarageBand '11 won't download additional loops
Or a manual download using the Terminal as mteep suggests:
Re: GarageBand '11 won't download additional loops
Léonie

What is the difference aside from size between the 15 and 17 inch MBP

im trying to decide which one to get. money is not the issue here. I do need to carry on the laptop in my camera bag worldwide. I want the fastest most adept laptop. Photoshop ( when they offer the new version ) and garageband must run very smoothly. Will the 17" run that better than the 15" or is this just about a bigger screen?
anyone have experience with both?
own both?
thanks

it's really just the screen, a couple of extra ports and the availability of a 7200rpm drive as a custom build, if this appeals to you. that's it.

Is it possible to change the font style and size of the front panel title?

Can you change the style and size of the Front Panel Window title? I seem to have no luck. I seem to be stuck with only 1 font/style. I would like to use a superscript for 1 of the letters in the title. Is this possible? If it isn't this would be a nice feature to have in the future. I am using LabVIEW 8.5.1.

Things like the window title font is a function of Windows - not LV. You can change it globally, but not on a window by window basis.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Bcp doesnt throw an error when the data length exceeds size of the column

Hi,
We are using bcp in SQL 2008 R2 to import the data from flat file. When the data length exceeds the size of the column, it doesn't throw any error instead it has ignored the row.
Please suggest me how to truncate and load the data into table.
Thanks,
Pasha

Hi Pasha,
According to your description, you want to import the data from flat file to SQL Server table with truncated data in SQL Server 2008 R2. To achieve your requirement, we can use Import and Export wizard. For more details, please refer to the following steps:
Launch SSMS by clicking SQL Server Management Studio from the Microsoft SQL Server program group.
Right click on the destination database in the Object Explorer, select Tasks, then Import Data from the context menu to launch the Import Wizard.
Choose Flat File Source as Data Source, then browser to the flat file.
Choose SQL Server Native Client 10.0 as Destination, then select the destination database.
Click Edit Mappings button to change column size or other properties.
Finish the processing.
For the example about how to use Import and Export wizard, please refer to the blog below:
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Does the new (2013) macbook air have the same structure and size as the original?

I just recently purchased the new 2013 13" macbook air and was looking into getting a case. Wanted to know if i need a different case for the 2013 macbook air? Please respond ASAP!!

Actually... if by "original".... you actually mean "original", the answer would be no. The original Air was released in 2008 and has a significantly different format than the second generation:
http://www.everymac.com/systems/apple/macbook-air/specs/macbook-air-core-2-duo-1 .6-13-specs.html

What's the maximum hard disk size for the MBP?

Sorry the title might sound like a dumb question, but I was wondering if my MBP Core Duo, is future proof regarding the internal hard disk. Will it recognise any capacity, or stuck at a certain level?
Also what are the largest Apple supported internal drives currently available? Any recommendations?

That's kind of a gray area, but I think you may be right. Here are the conditions under which Apple can refuse service:
This warranty does not apply: (a) to damage caused by use with non-Apple products; (b) to damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage caused by operating the product outside the permitted or intended uses described by Apple; (d) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Apple or an Apple Authorized Service Provider; (e) to a product or part that has been modified to significantly alter functionality or capability without the written permission of Apple; (f) to consumable parts, such as batteries, unless damage has occurred due to a defect in materials or workmanship; or (g) if any Apple serial number has been removed or defaced.
So if something breaks that's unrelated to your HDD upgrade, I think Apple still has to service it as long as you didn't break it while performing the ugprade. At least that's my interpretation.

What is the best video format/size for the iPad Air?

I'm using Xillisoft Ultimate Video Converter. I'd like to know what format/type to use for best quality. It has different iPad profiles. I'd just like to know which would be best.
Thanks!

Hi Rod,
That link is from the Captivate help file:
You could also find this documented in the help file link:
http://helpx.adobe.com/pdf/captivate_reference.pdf
Look under the topic "Unsupported objects in HTML5 output".
Thanks!

What is the analog command of ncCreateNotification in the NI-XNET API?

Hy,
I'm using NI-XNET, with C++ at QT environment, Windows 7.
I'm looking for command that notify if a specific frame received from the network, something like the ncCreateNotification.
Thanks for advance,
Aviad

Hey Aviad,
So my initial impression is that I don't believe there is a notifier for NI-XNET like there is for NI-CAN. If you conifgure a session to read a single point frame, does this not achieve the behavior you are looking for? Looking at our documentation for migrating from NI-CAN to NI-XNET, I'm not sure that we have a notifier specifically for the NI-XNET driver like existed for NI-CAN. I'm going to have to look into this a little more to very definitively, but I think your best bet may be using a polling type call. Additionally, a single point input session may work for your needs as well. Let me look into this more and I will follow up with you soon.
Ben N.
Applications Engineering
Certified LabVIEW Developer

When using the analog inputs and analog outputs of the PCI-7344, what is the conversion between the voltage entering the card to counts? Similarly, what is the conversion between counts to voltage at the output of the card?

I am using the PCI-7344 to control my system. The analog inputs are connected to the output of my system while the analog outputs serve as feedback to the system. The system is a servo. I want to know what is the conversion between the voltage read at the input, to card counts, and finally to the voltage output to the system.

Carole,
If you are trying to do analog feedback with a servo motor, Chapter 14 of the manual talks about how to set up the torque feedback. Also linked below is a LabVIEW example of analog feedback.
Chapter 14
NI-Motion User Manual
Automatic Analog Feedback with FlexMotion example
A. Talley
National Instruments

What is the maximum excel file size that can be converted to pdf?

Currently I am trying to convert a excel file of 37 mb by using pdf generator. And it fails with the exception as java.lang.OutOfMemoryError: Java heap space; nested exception is: java.lang.OutOfMemoryError: Java heap space.
Waiting someone help! T_T

Open in PS and print to the Adobe PDF printer. However, a 448MB TIFF seems huge. At 200 dpi and 24 bit color (millions of colors) that leaves you with a 61inX61in graphic. Even at 600dpi, that is 20X20.
For us to help you, please indicate exactly how you are trying to convert from PhotoShop. For Acrobat, are you trying to open the TIFF in Acrobat directly? Is the TIFF a single sheet, or multiple sheet? There are a lot of unanswered questions for us.
One of the limitations on file size is the size of the temporary PS file that is created in the PDF creation process. This PS file is created in the TEMP folder that is limited by MS. So you might try emptying the TEMP folder.

Problem with the analog input acquisition in labview fpga 8.5.1 and CRIO

Hello all,
I am using NI CRIO 9104 RT controller with 9014 FPGA chassis.I am using an Analog input module 9205.My problem is with the acquisition.I am using a
function generator which generates some sine wave of -1 to 1 ,5hz to125khz sine signal and i have connected to 9205 in rse mode.In FPGA vi i had placed the I/O node and placed an indicator(data type FXP).If i connect the i/o node to a chart or graph,i am not able to see the output.?How this problem can bbe solved
Next i had placed a FIFO in DMA transfer mode of depth 1023 which will accept the U32 datatype,so i did some manipulation as mentioned in a tutorial.
Now in RT VI i am reading the same data from the buffer in U32 and doing the reverse manipulation i am able to view the data.Now the problem is ..if i am
increasing the frequency of the input signal,the data is completly lost ?How can i overcome this problem...
thanks in advance,
srikrishna.J
Analysis Engineer,
Neurofocus

Difficult to see where is the problem ....
Be sure you are doing a good RT system by grabing reference design examples
Don't forget to specify the DMA FIFO size in the RT code
Doesn't matter the size of the DMA size under the FPGA project explorer.
Upload your code, You will get answers...
Mathieu

What is the Analog Ouput FIFO size of the LAB PC 1200 ?

Similar Messages

Maybe you are looking for