What is the api to upload Customer contact data through api
Dear
i have uploaded customer and thier sites data but now need to upload customer sites contact data,i have searched but still
unable to find contact api,
could you please have any idea to upload contact data api.
--thanks
Did you check note 837568.1 ?
Regards,
Srini
Similar Messages
-
What is the Tcodes for Uploading of data using BDC & CATT
PP members:
I was going through the <b>cutover activities</b> , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean <b>material of previous stage</b>, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren RDear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM. -
What's the process of uploading videos to youtube?
This might sound like a silly question... but what is the process of uploading videos to youtube?
Does the video get processed into youtube friendly format and then get uploaded to youtube?
So therefore, no re-processing is required on youtube? And therefore the video appears intantly after upload
This has been what I have experienced
Or does the video still need to be processed by youtube as well?
If the above is true... then I think the best way to do the work is to process the video on my laptop and output in best format
And ONLY then upload to youtube
From experience, I've found this takes time for the video to be processed and then published on youtube
Problem: I've had about 40 videos, all of about 1 minute 30 seconds uploading from FCPX
I left overnight. he queue is STILL processing
I'd rather have youtube process and use up their CPU power!
Any feedback to the above would be great
Thanks
OmarI think the best way to do the work is to process the video on my laptop and output in best format
And ONLY then upload to youtube
Encode before you upload use the share function or better with Compressor (export master file anad let Compressor encode with youtube preset and upload that file via Safari or the Uploader
Problem: I've had about 40 videos, all of about 1 minute 30 seconds uploading from FCPX
I left overnight. he queue is STILL processing
I'd rather have youtube process and use up their CPU power!
It is almost an hour it seems rather slow but not unusual and they were encoded before upload ? -
What is the t-code of customer reports
hi,
what is the t-code of customer details reports ?Hi,
You can use T.Code VCUST to view the customer list.
Thanks,
Chidambaram.S -
What are the general errors will come in data uploading
Hi Friends,
What are the general errors will come in data uploading
Thanks in AdvancePaul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat -
How to know what are the privs for one custom schema?
how to know what are the privs for one custom schema?
please suggest me......Hi,
Check this user_sys_privs
Cheers
Pavan Kumar N -
HT2693 what is the garmin iphone application customer service number?
what is the garmin iphone application customer service number?
My GPS that I bought for 60 dollars got erased after i changed my apple id. I would like a refund or the app back. Please help
[email protected]Laxman25 wrote:
Yea because any apps with your "old" id are attached to that Id only. You can log into the iPhone settings, store, and change the apple I'd back to your old one. Redownload it and it will work. It will only work if you are logged in with that I'd. I'm not sure you will get much of an outcome with trying to get a refund. Go to the garmin website and pull support from there.
It is not correct that it will only work if you are logged in with the original ID. You must sign into the store with your original ID and then redownload the app from the Purchased tab. Once it's downloaded, however, you do not need to remain logged into that account. However, you'll need to enter your password for that account anytime you try to update the app. -
What is the phone number for customer service ... I want to pay my bill
what is the phone number for customer service ... I want to pay my bill
Hello Roofking,
I'm sorry for your troubles. I have provided the steps to using the automated system below. This feature is free of charge.
Call 1-800-COMCAST (1-800-266-2278) or 1-800-XFINITY (1-800-934-6489)
Select preferred language (the system will default to English).
Enter the phone number.
Select option 2 for Payment.
Select option to make a one-time payment.
-
What is the DYI solution to error "contact iTunes support to complete this transaction"
What is the DYI solution to error "contact iTunes support to complete this transaction". They have fixed it for me before but it still happens every so often and I would love a DYI fix since its on going! And please no answers that are 'contact iTunes support to fix this error' as I know that but you have to wait a minimum 24hrs and the problem is reoccurring.
Seriously, the DIY solution is to contact supprt. There is nothing you can do to magicaly fix this and we can;t help you fix it because we are all just users like you. Contact support.
-
What is the difference between UPLOAD and WS_UPLOAD?
Hi,
What is the difference between UPLOAD and WS_UPLOAD?
Best Regards,
GopalHi,
Both upload and ws_upload does the same functionality, that is transfere data from presentation server to application server or from PC to SAP system(to an internal table).
There are very few difference between the two.
1 Upload requires a User Interaction for uploading i.e., user has to respond to the dialog boxes that appear WS_Upload does not. You just need to specify the file location in the function input parameters itself.
2 upload - u can give the file in run time wsupload - u have to give in Function module
3 upload is meant to be used by abappers. ws_upload is meant to be called by SAP. It is not a standard ABAP command.
4 ws_upload is Obsolete : No longer supported by SAP. Use GUI_UPLOAD instead.
The fm WS_UPLOAD was the first version of fm to get a file from presentation server, now from 4.6 it's obsolete, the new fm is GUI_UPLOAD.
The fm UPLOAD is the fm used in several applications, like ABAP editor, to upload the file.
In the some versions (it depends on patch level) UPLOAD can call WS_UPLOAD (or GUI_UPLOAD).
Last but not the least, 'upload' internally calls 'ws_upload', that's the difference.
Hope this would be helpful.
regards,
Varun. -
HT1766 What's the easiest may to move contacts,app etc from my 4 to my new 4s thank
Got new 4s ,what is the best way to transfer all data from my oly 4 thanks
See http://support.apple.com/kb/HT2109.
-
Outbond interface programme to upload customer master data.
Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
<b>ALE IDOC</b>
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
What are the prerequisite for getting MTTR / MTBR data.
Dear SAP Experts,
I want to know what are the prerequisite for getting MTTR / MTBR data.
Regards
ERP TechPre-requisites are:
Maintain Start date in Equipment / Functional location master
Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
Maintain the Breakdown tick mark in notification
Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types) -
How to Create Customer Contact data in SAP CRM
Hi All,
Would want to create Customer Contact data in SAP CRM, could please guide me step by step that how can i create the customer contact data in SAP CRM?
Regards
AvinavHello Avinav,
In CRM 6.0 and 7.0 GUI is no more used, you can use WEB UI and login using SALESPRO role to create a contact.
1. Logon to CRM web UI
2. Choose Create Contact from the Navigation bar
3. Enter all the data - Title, first name, last name, account id,
street, stree2, street3, street4, street5, city, postal code, email,
mobile no and website.
4. Press the Save key.
Hope it will help! Please award points in case this helps!
Best Regards
Lata -
What is the purpose of open/close connection data socket?
Hello everyone,
I am writing and reading values in OPC Server through data socket. What is the purpose of open/close connection data socket when writing /reading a value? Without the open/close connection element, it still work correctly. I am writing values in the server thru event stucture.I do not need any buffered reading or writing. What will happen if I didnt not use the open/close connection? Maybe it may cause some problems in my program which i didnt realise?
And I have attached an example of my program. Thanks
Yehchia
Attachments:
Test Event.vi 11 KBHi YehChia,
I was talking about something like that:
1. Not good. since with every iteration the DS connection needs to be opened and closed.
2. Good. Since you open the connection only once then do the reads and close it afterwords.
Christian
Maybe you are looking for
-
Thin white and black lines on video output
I loaded a packaged project to make some changes. (The project was packaged with a different computer than my current. Everything looks clean within Premier. I'm outputting standard Vimeo settings. One of the GoPro clips exports with come-like whi
-
Use of KVM switch with an IMAC
Have a new IMAC and wanted to use my existing IOGEAR KVM switch. Normally, the two computers plug into the switch and from the switch to the computer. Since the computer and monitor are all one, is this still possible - or how do I use this with the
-
ERROR: 2011-06-12 01:50:01 com.sap.inst.migmon.LoadTask run Unloading of 'SAPDODS' export package is interrupted with R3load error. Process 'E:\bin\uc\R3load.exe -e SAPDODS.cmd -datacodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code
-
Best options to recover Data from external?
Hey guys, I have this person who has a 1tb external WD drive but the drive is not showing up on the desktop of her mac or mac pro, she can see the WD item in the DU. She also tried EaseUS Data Recovery Wizard Trial but her hard drive isn't recognized
-
Apple Mail long russian filename attachment problem
Hi, The problem is that Mail.app set incorrect filename for attachment. I have gmail account and set up Mail.app as IMAP client. Most attachments are correct, but sometimes they come with bad names.For example: In gmail account (web) everything is o