What is the application name when CMS connects to SQL server 2005

Hi, We are BOXI R2 SP3. We have 3 servers with CMS installed on each. We have 3 separate web servers. When I monitor sessions in SQL server 2005 then I see 6 process. 2 process are from each processing servers but the application name for 2 servers ( 4 processes) are WIndows Installer-unicode and for third server its Business Objects Enterprise.
I think all the env should be same in a cluster so not sure how to correct this issue.
Thanks,

No Answer so closing this topic.

Similar Messages

What's the username & password when i connect device from cisco network assistant

what's the username & password when i connect device from cisco network assistant?
http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

Although that may be true...
If I click the "Connect As..." button it asks for a username and password.
I've experienced connecting to other user's computers on a network. To gain access to their computer, I just use their username and password. I've done this before to transfer files without using a flash drive or burned disk.
I'm trying to find out what I'm supposed to log on as to gain access to this device...
My point is that yes, I'm connected to it by wifi. Otherwise it wouldn't show up; ha-ha!
Is my point really that hard to grasp?

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

After restoring SharePoint farm backup ( The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connection)

Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al Balushi

Hi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

How Crystal Report XI connect o sql server 2005

hi
i am tring to create a report connecting to sql server 2005, however, i could not find a proper provider to connect sql server 2005, and i found Microsoft OLE DB provider for sql is only suited for sql server 2000 and earlier version, and i dont want to use ODBC connecting, so my question if there is other way to connect sql 2005 in the Crystal report XI?

Hi
Due to timing of product release dates, Crystal Reports XI was not tested with Microsoft SQL Server 2005. The changes made to connectivity drivers for MS SQL Server 2005 are significant and have been addressed in Crystal Reports XI Release 2.
As per Supported platforms document of CR XI only the below SQL servers are supported:
Microsoft SQLServer 2000 SP3 with
- ODBC MDAC 2.8
-JDBC SQLServer 2000
- OLEDB MDAC 2.8
Microsoft SQLServer 7.0 SP4 with
-ODBC MDAC 2.7
-OLEDB MDAC 2.7
However MS SQL Server 2005 is mentioned as supported in CRXIR2 as below:
MS SQL Server 2005 with
- Microsoft ODBC MDAC 2.8
-Microsoft ODBC SNAC (Native Client)
-Microsoft OLEDB MDAC 2.8
-Microsoft OLEDB SNAC (Native Client)
Contact your sales representative to obtain a copy of Crystal Reports XI Release 2. A minor product update is required for CR XI Release 2 to enable reporting off MS SQL Server 2005.
For more information regarding changes in CRXI and CRXIR2 please refer to the documentations in the link provided by Amit.
Hope this helps!!
Regards
Sourashree

6.1 What is the Domain Name when using LDAP

Hi,
We are currently installing Tidal 6.1, we are going to integrate Oracle Directory Server for LDAP (not AD).
Qustion is, what is the domain name we have to provide when we install?
Master and CM both on Linux.
Thanks!

Do you know any document which shows LDAP compatibility?
I havent seen on Intsallation Guide.
Problem is, when I install, linux servers are on different network (domain) but LDAP contains different domain details. Wondering how Tidal check the domain details when authenticating.
When we give LDAP domain details, it gives following error.
WARN: javax.security.auth.login.LoginException: [LDAP: error code 49 - Invalid Credentials]
Anyone know how to increase log level to debug?
Thanks!

SQL Server Error when tryingt to install the CMS DB on SQL Server 2005 x64

I am trying to install BOEXI R3 on w2k3 64-bit OS in a SQL Server 2005 x64 database, I am currently at the installation step where i Specify an exisiting CMS database. I created a System DSN and tested it, and it was successful. So when I got to the screen where I select my datasource I had to check use trusted connection because the datasource would not show up when Use DSN created by WOW64 option was checked. From there I could select the database I created. Oh yeah, I also made the application server local system account part of my DB admins group so it has full access to the database yet when I click next to connect I get a CMS Database Error: STU000226. here is what I have in my log:
ThreadID     Message
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: findDFA_LLR: (CmdLineDir) C:Documents and SettingsgsdadminDesktopBOEXI and BSM AnalyticsBOEXI R3 Full Version from SAPpackagedbcheck
sqlrule.llr
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: database subsystem only
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: loading libary succeeded
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Init()
(Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
(Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:118): trace message: Setting static property map
(Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:125): trace message: CWireObject::InitializeStaticPropertyMap() - reference count: 1
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: initializing subsystem succeeded
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: done loading subsystem - database subsystem only
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Connect()
(Thu Apr 23 20:57:46 2009)     3024     3028     (.DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
(Thu Apr 23 20:57:46 2009)     3024     3028     (.SQLServerDatabase.cpp:119): trace message: SQLServer error found: ErrorMessage( (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified), ErrorCode(0)
(Thu Apr 23 20:57:46 2009)     3024     3028     (.dbutils.cpp:820): trace message: Caught DatabaseSubystem Error: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOEXI_CMS". Reason: (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified
(Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Shutdown()
(Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
(Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:182): trace message: Releasing
static property map
How do I get past this?

The workaround was, I installed the SQL Server Client tools and created a System DataSource and then had to create a user DataSource (it is a quirk in the installer I guess) to get past this point in the installation. Now I have an even bigger problem. Everything but the CMS installed and the installer hung at the "Configuring the CMS" part. The installation finished but when I tried to log into the Central managment console I got this error:
Error: Server GSD-RRPT-RDC:6400 not found or server may be down (FWM 01003) null
I looked at the forums for the cause of this error and came to the conclusion that BOEXI does not support an installation on SQL Server 2005 when using Integrated Authentication to the SQL Server. See the engineers here disabled SQL Authentication for the SQL Server and will not allow it.
Is this true? Or is there a workaround to install the CMS using Integrated Authentication in the DataSource ?
Thanks.

Problem when create connection to SQl Server ( charecter set cp1255 not found ))

Hello my name is Ron ,
i want to connect to SQL SERVER with the microsoft driver
from Java ( with jDeveloper ) .
then i did the following steps:
1) i download and install the jdbc driver for Sql server
on my machine ( windows XP with , JDK 1.3 )
2) i update my classpath with the .Jar lib file of the driver .
3) when creating the connection
i'm using the
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
this is Ok , the driver was loaded .
4) when trying the GetConnction
Connection conn = DriverManager.getConnection
("jdbc:microsoft:sqlserver://server1:1433","username","secret");
i get the following error:
[Microsoft][SQLServer 2000 Driver for JDBC]Character set CP1255 not found in com.microsoft.util.transliteration.properties.
please help me with this . any idea ?
thanks in advance
Roni

Ron,
Try following this document
http://otn.oracle.com/products/jdev/howtos/bc4j/bc_psqlserverwalkthrough.html
from the how-tos archive.
Also, try to change the compiler encoding to UTF-8. you do this in the project setting window.
http://otn.oracle.com/products/jdev/htdocs/vcmigration/weblogic/unicode.gif
http://otn.oracle.com/products/jdev/htdocs/vcmigration/weblogic/unicode2.gif
good luck

Connect to SQL server 2005 in web dynpro java

Hi,
I am new to web dynpro. I want to coonect to SQL server 2005 server from my simple application.
For that what and all the prerequisetion and what and all the steps to follow.
I have created a database and the table too. I have created the application too. But i am not able to connect to sql. what might be the problem. I tried to create the data source in visual administration. and written code in the view like this.
try {
                                               String userName = "jktuser";
               String password = "jkt12345";
               String url ="jdbc:microsoft:sqlserver://jktr3:50000;database=student";
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver ").newInstance();
               Connection con =DriverManager.getConnection(url, userName, password);
               System.out.println("Database connection established");
               Statement st = con.createStatement();
               String str = "select * from studentdata";
               ResultSet rs = st.executeQuery(str);
               while (rs.next()) {
               String str1 = rs.getString(1);
               wdComponentAPI.getMessageManager().reportSuccess(str1);
                                                String str2 = rs.getString(2);
               wdComponentAPI.getMessageManager().reportSuccess(str2);
               wdComponentAPI.getMessageManager().reportSuccess("sukces");
          } catch (Exception e) {
               wdComponentAPI.getMessageManager().reportWarning(e.toString());
And i am getting this error
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]End of stream was detected on a read.
Plz any one help me in this.
Regards,
H.V.Swathi
Edited by: H.V Swathi on Nov 21, 2008 6:46 AM
Edited by: H.V Swathi on Nov 21, 2008 7:16 AM
Edited by: H.V Swathi on Nov 21, 2008 7:17 AM

Hi,
I have tried all the steps to configure the remote connection but it is giving an error that says,
"Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again. (SQLSAC)
ADDITIONAL INFORMATION:
An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.InnerWmiException&LinkId=20476
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&LinkId=20476
The operation could not be completed. (WinMgmt)
BUTTONS:
OK
Please i welcome your valuable inputs.
Thanks & Regards
Swathi

ODBC connect to SQL Server 2005 from Oracle 10.2.0.3 32bit Linux

I’m unable to establish a connection from Oracle 10.2.0.3 32bit Linux to SQL Server 2005.
The ODBC driver is the 32bit DataDirect 5.3 drivers and when I do a status on the listener it does have a handler for SQLDB
Any help is appreciated.
Received the following error:
SQL> select count(*) from columns@SQLDB;
select count(*) from columns@SQLDB
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/app/DataDirect/lib/libodbc.so'
ORA-02063: preceding 3 lines from SQLDB
-----Contents of trace file------------------
Oracle Corporation --- THURSDAY JUL 10 2008 10:17:16.251
Version 10.2.0.3.0
hoagprd (2): ; hoagprd Entered.
HOACONN.C (244): ; [Generic Connectivity Using ODBC] version: 4.8.2.0.0080
HOACONN.C (288): ; Class version: 250
hoagprd (2): ; hoagprd Exited with retcode = 0.
hoainit (3): ; hoainit Entered.
(0): ; connect string is: defTdpName=SQLDB;SYNTAX=(ORACLE8_HOA, BASED_ON=
ORACLE8, IDENTIFIER_QUOTE_CHAR="", CASE_SENSITIVE=CASE_SENSITIVE_QUOTE);
BINDING=<navobj><binding><datasources><datasource name='SQLDB' type='GENERIC_
ODBC_FOR_HS' connect='SQLDB'><driverProperties/></datasource></datasources><
remoteMachines/><environment><optimizer noFlattener='true'/><misc
year2000Policy='-1' consumerApi='1' sessionBehavior='4'/><queryProcessor
parserDepth='2000' tokenSize='1000' noInsertParameterization='true'
noThreadedReadAhead='true' noCommandReuse='true'/><debug driverTrace='true'
generalTrace='true'/></environment></binding></navobj>
ORACLE GENERIC GATEWAY Log File Started at 2008-07-10T10:17:16
hoainit (3): ; hoainit Exited with retcode = 0.
hoalgon (7): ; hoalgon Entered. name = dbuser.
sysbase.c (677): ; libodbcinst.so: cannot open shared object file: No such
file or directory
DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
DB_ODBC_INTERFACE (727): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol '
SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
nvRETURN (./drv_bind.c 230): -2220
nvRETURN (./nav_bind.c 298): -2220
hoalgon (7): ; hoalgon Exited with retcode = 28500.
hoaexit (6): ; hoaexit Entered.
hoaexit (6): ; hoaexit Exited with retcode = 0.
(0): ; Closing log file at THU JUL 10 10:17:16 2008.
--------------end of trace file ---------------
--------TNS entry ----------
SQLDB=
(DESCRIPTION =
(ADDRESS =(PROTOCOL = TCP)
(Host = oracledbhost)
(Port = 1521)
(CONNECT_DATA = (SID =SQLDB)
(HS=OK)
-------Listener.ora entry----------
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(PROGRAM=hsodbc)
-------initSQLDB.ora----------
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = SQLDB
HS_FDS_TRACE_LEVEL = 4
HS_FDS_TRACE_FILE_NAME=/app/DataDirect/SQLDB.trc
HS_FDS_SHAREABLE_NAME=/app/DataDirect/lib/libodbc.so
# ODBC specific environment variables
set ODBCINI=/app/DataDirect/odbc.ini
------odbc.ini entry------------
[SQLDB]
Driver=/app/DataDirect/lib/ivmsss23.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=SQLServerhost,1401
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SQLServerDB
LoadBalancing=0
LogonID=
Password=
QuotedId=No
SnapshotSerializable=0

The error message is indicating problems loading the driver manager.
A common issue on Linux (especially on Suse Linux) is related to library caching. First of all make sure you add the LD_LIBRARY_PATH to your listener.ora file to guarantee the correct libraries will be loaded. Your SID section will then look like:
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(ENVS=LD_LIBRARY_PATH=/app/oracle10g/product/10.2/lib:/app/DataDirect/lib)
(PROGRAM=hsodbc)
After changing the listener.ora file stop and start the listener.
Details about the set up can be found in Metalink note:
Note.264567.1 P216. How To Setup Generic Connectivity - HSODBC - on Linux
If this does not help enable strace and check out from which location libodbc.so is being loaded.
Please be also aware HSODBC has been desupported 15th of March. As you start a new project you should proceed with the follow up product DG4ODBC.

Database Connection Problem-SQL SERVER 2005

Dear all,
I have been struggling with this database connection.I have installed sql server 2005 in my PC and i am trying to connect to the Database Adventity.But it is showing port 1432 invalid.I have placed sqljdbc jar in my lib folder.If i dont specify Database name then it will print hi Message..if i specify Database name then the error will come.
MY CODE is::
<%@page import="java.sql.*,java.io.*,java.lang.*,java.util.*,java.util.Vector,bean.*" %>
<%
          Connection con;
          Statement stmt;
          String url= "jdbc:sqlserver://156.0.11.140:1433/Adventity";
          Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
          con = DriverManager.getConnection(url,"sa","hcl@123");
          stmt = con.createStatement();
          out.println("hi");
%>
THE ERROR IS:
javax.servlet.ServletException: The port number 1433/Adventity is not valid.
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:867)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:800)
     org.apache.jsp.adv1_jsp._jspService(adv1_jsp.java:66)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
root cause
PLEASE HELP ME TO GET RID OUT FROM THIS PROBLEM.
THANKS IN ADVANCE.

hi
i have given what u said and it is not working but it displays blank page.even i tried to getdate..
pls help me
<%@page import="java.sql.*,java.io.*,java.lang.*,java.util.*,java.util.Vector,bean.*" %>
<%
          Connection con;
          Statement stmt;
          try
          String url= "jdbc:sqlserver://156.0.11.140:1433;databaseName=test";
          Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
          con = DriverManager.getConnection(url,"sa","hcl@123");
          stmt = con.createStatement();
          String user="select getdate();"
          System.out.println(user);
     catch (Exception e) {
               out.println(e.toString());
          } finally {
               try {
               } catch (Exception e) {
                    e.printStackTrace()     ;
%>

What is the application name when CMS connects to SQL server 2005

Similar Messages

Maybe you are looking for