What is the BADI to create a new tab in ME21N transaction

Hi,
I have created a new document type zbr with the transaction spro.
I wanted to add a new tab for the given document type zbr. How to create a new tab for the document type.
How to create a new tab using BADI. what is BADI used to create the tab

Hi,
Pls check BAdI 'ME_GUI_PO_CUST'  for your reqmt.
Pravat.
<i>*Reward points if helpful</i>

Similar Messages

  • What is the use of creating a new calendar group in iCal?

    Hi All!
    Still new to this. What is the use of creating a new calendar group in iCal? Enlighten me please.
    Cheers,
    John

    john from marayong wrote:
     What is the use of creating a new calendar group in iCal? Enlighten me please.
    You may create own calendars for special purposes as e.g. Sport's, secret events, hobby's and so on.
    As iCal allows to share calendars, you want eventually not share family events to others or if you manage a circle you may only share the "Homebrew" calendar with them.
    Lupunus

  • MM - Creating a new tab in MIGO Transaction

    Hi Gurus
    I am facing a problem to create a *new tab in transaction MIGO*.
    The  scenario is like, the "item text" tab in ME21n/ME22n which contains some text, needs to be mapped in MIGO under a new tab.
    I checked with BADI  "MB_MIGO_BADI" but unable to find the exact interface to implement.
    Thanks in advance

    Hi Sandy
    Check the method PBO_DETAIL of badi  MB_MIGO_BADI: for Item level screen  add your screen to that code .
    1> NEW TAB for Item level in MIGO   
       E_CPROG   = 'ZSCREEN'.   '' Screen should be a container
        E_DYNNR   = '1001'.  "" Screen No
        E_HEADING = 'ITEM TEXT '.  Heading 
    2 > Creating Standard text :
    using se75 cretae standard text and text objetcs as MIGO is not haing as if in PO .
    Create an entry using the DOCUMENT NO and ITEM NO combination and save the cretaed text using Create_text
    entry would be store in STXH table . 
    3 > Use BADI MB_DOCUMENT_BADI* : For creatign actual text for item level mrthod :* MB_DOCUMENT_BEFORE_UPDATE* .
    Hope it will be help full .
    Thanks & Regards
    Swapnil Kamble

  • I have use three free apple Id and now when I am creating a fourth time it's saying that it is the maximum. What must I do to create a new apple id. Plz help

    I have use three free apple Id and now when I am creating a fourth time it's saying that it is the maximum. What must I do to create a new apple id. Plz help

    Sorry, no way around this limitation on an iOS device. To use a new iCloud account, you need to create such on a computer first, then setup the account on your iOS device.

  • What is the need of creating New order type in PO

    Dear Experts,
                 I have a doubt in MM, what is the need of creating New Order Types?  Please explain with Business scenario.  Thanking you,
    Regards,
    Elangovan.A

    Hi Elangovan
    Whenever you have a doubt like this...
    --- just verify the config settings for your parameter (order type here).
    ---Also check whether authorizations can be given for this ?
    ---Do you need it for specific analysis ? Are there standard reports/listings available ?
    So, some of the uses of order type are:
    1) What are the parameters controlled by order type ?
    It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
    2) Authorizations can be controlled with order type.
    3) You can also use it in analysis/listings
    Best regards
    Ramki

  • I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new  fields recognized. What can I do to redo my documen

    I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new  fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?

    You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
    You master the "static" content..
    You keep this authoring file and have a backup of this file.
    You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
    The authoring file  and output PDF (with form fields) gives you "rev 00".
    Now, you must change something in the "static" content.
    Open the authoring file and save as to a new version (e.g., "wordfile_v00"  becomes "wordfile_v01).
    Output this to "pdffile_v01".
    Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
    Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
    This replaces the "static" PDF page content and does not affect the form fields on the page.
    (you may have to adjust position of form fields)
    Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
    Be well...

  • I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

    I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
    Please I'll be thankfull.

    I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through.  Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while.  My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much.  That's why I was hoping I could use the migration function piecemeal.  I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

  • What are the prerequisites  to create New Depreciation areas

    Hi SAP experts,
    I would like to know what are the prerequisites to create new depreciation areas and what is the configuration for this in details.
    Thanks & Regards
    Mouly

    Hi Mouly,
    The pre- requisite for creation of depreciation area are
    - Reporting of depreciation as per different laws i.e in india, we need to report depn as per Ind accounting standards, as per income tax act, etc
    - Whether we are using parallel currency or not for that company code.
    Regards
    Vivek

  • What would cause the screen to swith between backgrounds as if it is being controlled remotely? the system had created 7 new folders on it's own.

    System is currently switching between mutliple screens without me touching it. The system has created several new folders. The system is performing as if it is being remotely controlled.

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • My firefox won't create a new tab when I click on the tab. It will create a new window. It worked fine till this morning. I've rebooted several time to see if that would make a difference. It doesn't.

    I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
    I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
    Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • I create a new apple account but i dont have credit card.what should i do, i create a new apple account but i dont have credit card.what should i do

    i create a new apple account but i dont have credit card.what should i do, i create a new apple account but i dont have credit card.what should i do

    Hi fahmeed,
    Thanks for visiting Apple Support Communities.
    If you need to create an Apple ID (iTunes, iBooks, or App Store account) without a credit card, see the instructions in this article:
    Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    If you already have an account created, but need to change the payment information, see this article:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    Best,
    Jeremy

  • BADI:problem with creating a new tab in BADI

    Hi
    I'm new to BADI's.
    i have a requriement to add a new tab in the MIGO transaction and add a field in that new tab .
    my Functional specification author is suggesting to use the BADI "MB_MIGO_ITEM_BADI" to create a new TAB .
    But i'm not find any function code availale in this BADI .
    Can anybody tell me how to use this BADI "MB_MIGO_ITEM_BADI" to create a new TAB .
    Also can anybody provide me any documentation available in designing a new TAB or new screen using BADI's ?

    Hi pawan
    Try this badi :   MB_MIGO_BADI  -
    (BAdI in MIGO for External Detail Subscreens)  as the name suggest ,
    If you want to add a screen in header level use : Method : PBO_header an code as :
        e_cprog   = 'ZMMPRM0001'.     """ Your screen created
        e_dynnr   = '1000'.                     "Your screen No
        e_heading = 'TEXT ID '(004).    """" Name of the screen to be created .
      ELSE .
        e_cprog   = 'ZMMPRM0001'.
        e_dynnr   = '1000'.                     "External fields: Display
        e_heading = 'TEXT ID '."(004).
    or if at item level
    u can use methid : PBO_DETAIL
    for item level screen creation . and code in the same maaner ..
    You can explore the remaning methods as per your requirements .
    Hope it helps ..!
    Regrads
    Swapnil P KAmble

  • I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
    See the Activation Lock FAQ for what you and they need to know.

  • What are the steps to create sap apo ..plz send step by steps plzzzzzzzzzzz

    what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

    what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

  • How can find what are the customers are created in my earlier version.

    Hi all,I am trying to find out how can I check the  what are the customers are created in my earlier version of sap (i.e 4.7B)
    My client  Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.

    Hi,
    You know when the SAP went live with the new version.
    In t.code SE16, enter table name KNA1.
    In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
    Regards,

Maybe you are looking for