WHAT IS THE BASIC PHOTOSHOP CALLED?

WHAT IS THE NAME OF THE BASIC PHOTOSHOP where I can enlarge a photo , decrease it, clip it...thanks in advance NOT INTERESTED IN ALL THE THINGS THE YOUNG PEOPLE DO. thanks in advance

Photoshop Elements 12 (approx $100)
Adobe Photoshop Elements 12 - Buying guide
Photoshop CS6 (approx $699)
Photoshop CS6 Extended (approx $999).
Creative Suite 6
NOT INTERESTED IN ALL THE THINGS THE YOUNG PEOPLE DO.
Hmmmm.... I remember where I was when JFK was assassinated.
Does that make me "young people" or "old people"?
Nancy O.

Similar Messages

Does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level?

does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level for individual at $19.95?

Here's a list of fonts included with Photoshop CS6
Fonts Included with Photoshop CS6 and Photoshop Elements 10 | Techinch
I'm not sure if Adobe has a list of what they bundle in CC,but I will ask.
And here we go: Photoshop: What fonts are Included with Photoshop?
Gene

What is Visual Basic EXE called?

What is Visual Basic EXE called? I downloaded community and I can't find the exe.
And is it possible to put visual basic in a 32g USB?

I'm a bit confused. You ask about a "Visual Basic EXE", then say "I downloaded community".
If you downloaded Visual Studio 2013 Community Edition and are looking for the file that launches VS, you are looking for devenv.exe.
In a typical installation, devenv.exe is found at:
C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE
Regarding "is it possible to put visual basic in a 32g USB?", the answer is PARTIALLY. Visual Studio installs a substantial part of itself to your system partition, regardless of the install location you specify. So you can install part of VS to
USB, but that will not make your installation portable. It will only work on the original system where the other part was installed.

What are the basic .jar files to be set in web dynpro project classpath

Hi,
I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
Can you please let me know how to solve this or any other way to work around this.
It's an urgent to be fixed as early as possible, plz help me out.
Thanks & Regards,
Raj

Hi Julien,
Thanks for your reply.
We imported the the specified SCAs in our track.
we are getting the following errors.
Kind Status Priority Description Resource In Folder Location
Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
we manually set below .jar files in classpath settings.
pcuixssfpm.jar
pcuixssutils.jar
logging.jar
essper.jar
Is there any alternative to work around.
Thanks & Regards,
Raj

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What is the basic requirement to use SIPServlet

Hello Friends,
I learnt SIPServlet through bea.com API documentation. I would like to develop a small application using SIPServlet, please tell me what is the basic requirements to use SIPServlet. How i can get the library for SIP Servlet. Is there any special software support need to execute SIP Servlet.
Pls let me know
Thanks in advance....
Regards,
Kayal

Hi BSB
I would like to know what is the basic requirement to learn EP (Development)?
You should aware of ERP and business processes to start learning EP.
Is Java required? If so, is it J2EE and which version of it?
Java knowledge like jsps,corejava...it will be good..If you know well,you can play with webdynpro java.
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP
Webdynpro ABAP suits for you exactly for developing portal applications.
Koti Reddy

What are the basic difference in the putting a variable in Query

what are the basic difference in the putting a variable in
1. Characteristic Restrictions Vs 2. Default Values

Example - Cost Center Analysis Report - If I have Controlling Area in
Char Restricitons Only - I have restricted it to say ABC Controlling Area or a Variable- Report will be hardcoded to ABC Controlling Area or the Input Value entered during Runtime - After Execution, The Same cannot be changed in the report.
Assuming I will not have Controlling Area in the report means not in Rows n Columns.
You might have seen no change - > Did you place material in Rows or Columns ?

HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

What are the basic element of Base configuration of an oracle Database ?

What are the basic element of Base configuration of an oracle Database ?

889543 wrote:
What are the basic element of Base configuration of an oracle Database ?check this link
http://www.dbnest.com/entry/194/
and if you want to configure oracle installation click below link .
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install002.htm
--neeraj

What is the basic use of variables?

Hi,
what is the basic use of variables?
why they are used?
I read it in sap.help site but i m not getting why they are used?
Can u plz explain it with example..
Thank you,
Swati

Hi,
A variable is used to store value depending on the definition type like,
Single Value,
Interval,
Selection Option.
When we execute a Query, the variable defined for the particular field will be displayed.
Depending on the input conditions for the variable, the data corresponding to that field will be displayed.
Types :
1) User Entry
2) SAP Exit
3) Customer Exit
Search for these variable types in SDN.
You will get more than enough explanations.:-)
Regards,
Balaji V

What is the need for calling default constructor by JVM?

What is the need for calling default constructor by JVM? why the JVM should intiializes default values to the data
fields if the constructor is not there in our class?

mahar wrote:
What is the need for calling default constructor by JVM? Huh? The JVM does not need to call the default constructor. It needs to call a constructor.
You decide which one by the way you use "new".
why the JVM should initialize default values to the data fieldsHuh?
... if the constructor is not there in our class?Huh? The default constructor is always there. It may be private but it is still there.

What is the diffreence between call transaction and session method

hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.

CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala

What are the basic knowledge needed for swift coding?

can someone please tell me what are the basic coding languages needed for swift coding .
Like do we need to know c or c++ ??
Thanks

Although C is the default language of Unix, Swift does not require that you know C in order to learn or program in Swift. But knowing a programming language is a helpful step in learning a new programming language.
If you read the manual's first couple of chapters you will see what the goal of designing the Swift language was. In the manual they even suggest you can learn Swift without knowing C. They have removed the indirection of the C reliance on pointers and other arcane methods in order to make Swift easier and quicker to learn.
If you have no programming experience then I would suggest you might start with BASIC or Pascal. When you are comfortable with programming then you can take on Swift.

What is the interaction between calling VIs and subVIs using VI Server?

I'm studying for the CLAD and one of the lines in NI's preparation document here is this:
What is the interaction between calling VIs and subVIs using VI Server?
I know how to use the "Call By Reference" function to call a VI, but not necessarily a subVI. I thought a subVI is always loaded with the calling VI and has nothing to do with VI Server. What am I missing?
Solved!
Go to Solution.

Hi Bmihura,
I think this article will clear up how the VI Server works with subVIs called dynamically or statically.
Calling a VI by Reference
Best Regards,

WHAT IS THE BASIC PHOTOSHOP CALLED?

Similar Messages

Maybe you are looking for