What is the basic requirement to use SIPServlet

Hello Friends,
I learnt SIPServlet through bea.com API documentation. I would like to develop a small application using SIPServlet, please tell me what is the basic requirements to use SIPServlet. How i can get the library for SIP Servlet. Is there any special software support need to execute SIP Servlet.
Pls let me know
Thanks in advance....
Regards,
Kayal

Hi BSB
I would like to know what is the basic requirement to learn EP (Development)?
You should aware of ERP and business processes to start learning EP.
Is Java required? If so, is it J2EE and which version of it?
Java knowledge like jsps,corejava...it will be good..If you know well,you can play with webdynpro java.
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP
Webdynpro ABAP suits for you exactly for developing portal applications.
Koti Reddy

Similar Messages

What is the basic requirement to learn EP(Development)? Please advise

Hi Gurus,
This is my serious concern.
I am an ABAPer with 4+ years of experience.
I am from IT background also. I would like to know what is the basic requirement to learn EP (Development)?
Is Java required? If so, is it J2EE and which version of it?
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP).
Please advise.
I am posting this as, I have lots of confusion in moving to EP.
-B S B

Hi BSB
I would like to know what is the basic requirement to learn EP (Development)?
You should aware of ERP and business processes to start learning EP.
Is Java required? If so, is it J2EE and which version of it?
Java knowledge like jsps,corejava...it will be good..If you know well,you can play with webdynpro java.
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP
Webdynpro ABAP suits for you exactly for developing portal applications.
Koti Reddy

What are the client requirements to use BI OnDemand?

What are the requirements on the client side for using the bi.ondemand.com site. I would like to know what RAM amount is neccessary as well as the Operating System version.

The bi.ondemand.com product is a off premise cloud based computing platform. Being browser based, the only requirements is that you are using a browser at a version level higher than IE6. IE7, IE8, and Firefox are the supported browsers.
When opening bi.ondemand.com with an unsupported browser such as Opera, you may see a dialog box explaining that it is not supported, but you will find that there will not be any problems. Some browsers just have not been fully tested yet.
There is no real requirements concerning the amount of ram as long as there is enough to support the running of the browser.

What are the basic requirements for an SAP MM fresher to get through an interview?

Hello,
I completed my BE in Mechanical in 2012 and have some some experience of 2 years in mechanical field. Now i planned to switch my career into SAP MM. I am doing a classroom course on SAP MM.
So please suggest me the basic knowledge required ( Like topics) for a fresher to get through an interview.

Hi Kumar,
I will give just hints rest you have to think and act not about Interview quotations but SAP MM career.
There are couple of guys and all of them has got job, first as a SAP testing, as SAP freshers in HCL/HP India etc.
Later on they have learnt all the business process in project and all the E2E cycles in MM/SD/FICO etc.
Now they are working on support projects and roll out projects.
I think there are ways and we need to understand how to explore all the job possibilities.
Please have good knowledge and definitely you will succeed. Short cuts are not always the way to success.
Hope all my fresher friends will find some clue here....
Regards,
D Singh

Basic requirement to use mobility usage.

Hi all
i want to explore on mobility what are the basic requirement should be there exists. what is confiiguration which supports it
if u have any stuff share with me or URL's . any example on these mobility
or u can send mail 2 rvrsarma at gmail.com
regards,
ravi

Hi Ravi,
Please go through the [ help file |http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_mobile_user_en.pdf] on SAP BusinessObjects Mobile User Guide for your reference.
Also check the below link for some useful Mobillity information.
http://www.sap.com/solutions/mobility/index.epx
Hope it helps.
Regards,
Raghu

What are the System Requirements for Web Server hosting Adobe Air application

Working on a project that is using Adobe Air . The Adobe support site has system requirements for the client side application, but for the server side, what are the system requirements?
Using a Windows server, would expect to have approx. 100 concurrent connections at any given time.

Adobe AIR applications are installed on the end user's computer. They are not hosted on a web server. You can deploy an AIR file, which is the installer file for an AIR application, via your web server.

What is the basic use of variables?

Hi,
what is the basic use of variables?
why they are used?
I read it in sap.help site but i m not getting why they are used?
Can u plz explain it with example..
Thank you,
Swati

Hi,
A variable is used to store value depending on the definition type like,
Single Value,
Interval,
Selection Option.
When we execute a Query, the variable defined for the particular field will be displayed.
Depending on the input conditions for the variable, the data corresponding to that field will be displayed.
Types :
1) User Entry
2) SAP Exit
3) Customer Exit
Search for these variable types in SDN.
You will get more than enough explanations.:-)
Regards,
Balaji V

How to import Root CA certificate (Firefox 22)on windows using certutil? what are the dlls required?

I was using certutil from my application to import root CA certificate, but it it started complaining about missing dlls after Firefox 18. What are the dlls required.
It will be appreciable if some one can give the code of Firefox (What they use), to import root CA certificates.
Thanks

I found the following with a google search. Hope it helps.
*https://support.mozilla.org/questions/955513 How to add a private SSL root certificate authority
*https://support.mozilla.org//questions/952035 Where can I download certutil.exe and the NSS Utils for Windows
*https://www.felixrr.pro/archives/165/mozilla-nss-utils-with-nspr-compiled-for-download
*http://wiki.cacert.org/FAQ/BrowserClients#Mozilla_Firefox

BAPI_SHIPMENT_COST_ESTIMATE What are the min. required parameters to pass

Hi All,
I would like to know what are the minimum required parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price).
What will be the item category it will pick. I like to see it picks basic price related item category.
Does any body has used this bapi ?
Appreciate your fast reply.
Regards,
Leona

Hello, I´ll try to answer your question:
1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
2. is it possible to perform estimation to inbound shipments ?
Yes it´s depend on the shipment type. In standard system 0010 is used
In the example that I have I use an inbound delivery
3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
I think that the bapi only run in simulation mode and it can not create any document
4. is there any problem if i customized my scd item categories to open manualy ?
I think that the bapi needs to work properly automatic iten categories
can you please post sample code ( or any other doc's ) for this bapi ?
I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
Best regards,

What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

Csound1 wrote:
Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
The OP said they plan to store movies on the external drive.
Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
At least with exFAT there is no fee to Redmond, at least not yet.

Hi guru's what are the function modules are used in ALV

hi guru's what are the function modules are used in ALV

Hi vasu,
There are some function modules which will enable to produce the reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
some theory regarding alv:
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1. Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
all fields in this structure are to be output
the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
There is a field in the internal output table which contains the associated unit.
There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
appropriate decimal places display for the unit
an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
key (key column)
value set: SPACE, 'X' 'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
no_out (field in field list)
value set: SPACE, 'X' 'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
tech (technical field)
value set: SPACE, 'X' 'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
C: Color (coding must begin with C)
x: color number
y: bold
z: inverse
hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
do_sum (sum over column)
value set: SPACE, 'X' 'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
no_sum (sums forbidden)
value set: SPACE, 'X' 'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
input (column ready for input)
Function not available
Format column contents
icon
value set: SPACE, 'X' 'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
symbol
value set: SPACE, 'X' 'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
no_sign (no +/- sign) Only relevant for value fields
value set: SPACE, 'X' 'X' = value output without +/ sign
no_zero (suppress zeros) Only relevant for value fields
value set: SPACE, 'X' 'X' = suppress zeros
edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
The system contains the Report/Report interface (function group RSTI, table TRSTI)
Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2. Default
The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
fieldname
ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
fieldname
outputlen
datatype
seltext_s
seltext_m
seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes
sites :
http://www.sapdevelopment.co.uk/reporting/alv/alv_variousfcat.htm
<b>plese reward if useful </b>
Message was edited by:
sunil kairam

What r the skills required for R12 or Fusion ??

Hello All,
I am working on 11i Apps
which is the next version after R12 ?
Can you please tell me going forward what r the skills required for R12 or Fusion ?
As well what is SOA,BPEL,JSM ??? Is it related to the oracle apps ?
Please guide me.
Thanks in advance

Middleware fusion is basically software that connects applications to a database. Middleware Fusion, or Weblogic, sets on top of the database and different software such as SOA(Service-Oriented Architecture, OBIEE, ODI, etc is installed on top of Weblogic. I am not sure what JSM is and I can tell you BPEL is apart of SOA. All these things can connect to Oracle EBS if the company wants them to. Our company has SOA, OBIEE, and other products on top of different Weblogic Servers, and these applications connects to the server that Oracle EBS is on and use data from EBS. But yes, as stated before EBS and Middleware fusion are two totally different beast.
A middleware admin is suppose to do the middleware work but in our shop we don't have that luxury so we do it all. Jack of all trade environment, master of none but learn something new everyday and I'm extremely marketable because I dibble in so much. But I would not recommend you learn all. Way too much and can be extremely overwhelming, stick with R12, that is what I love the most!
Hope that helps

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What are the basic .jar files to be set in web dynpro project classpath

Hi,
I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
Can you please let me know how to solve this or any other way to work around this.
It's an urgent to be fixed as early as possible, plz help me out.
Thanks & Regards,
Raj

Hi Julien,
Thanks for your reply.
We imported the the specified SCAs in our track.
we are getting the following errors.
Kind Status Priority Description Resource In Folder Location
Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
we manually set below .jar files in classpath settings.
pcuixssfpm.jar
pcuixssutils.jar
logging.jar
essper.jar
Is there any alternative to work around.
Thanks & Regards,
Raj

What are the network requirements with respect to latency in Forms?

Our company is a global provider of online sourcing, procurement and collaboration solutions and services to Engineering, Procurement and Construction (EPC) projects and companies.
We operate three Internet trading portals with 1000+ buyers & supplier companies around the world.
The application is:
- based on Forms 9.0.2
- use SUN J2SE 1.4.2_0X on the client side
- runs on the public Internet using SSL
- hosted in Norway
Some companies reports about bad response times and the users claims that our application runs slow. The application do not run slowly, it is very responsive - however it requires a good network connection. Upon request from our customer base I need to know what is the requirements for the network in order to achive an acceptable user experience?:
- Maximum lantency
- Minimum bandwith
What where the design requirements Oracle set forth when developing Forms?
There can be a lot of "latency" generating network equipment in the path between the user and our server farm: switches, routers, proxy servers, chaching servers, firewalls, packet shapers, QoS, etc. One customer have all of these goodies and our users in that company do not have fun with the Forms application! However, they do not belive that there is something wrong with the network because normal HTML based sites works OK!
In order to help these customers I need (URGENTLY) to know what the network requirments are?

Its difficult to answer since the limits on latency will be governed by the user expectiation....
For example, a financail trading application which has fast data entry may see a latency of .7 second as not acceptable but this would be fine for an HR application.
The thing is that a user action, such as navigation between fields, wil generate a round trip to the application server to check for triggers (regardless if there is a trigger to file or not). Its this behaviour that gives Forms is very rich productive interface.
To compare with HTML is not reasonable since HTML can't do all these things like instant validation, masterdetail coordication, scrolling etc that Forms can do...
Its like complaining that your Sports car uses more petrol that your 50cc moped!!! ;o) It uses more petrol because its doing so much more.... Ok, I digress but you get the idea.
Forms will require a certain level of network performance. the figures for that performance will depend on user expectation/scenarios, the type of application and the way it is written (a badly written Forms application can still run slow even on a fast network).
Using network tools you can work out the latency (ping) from client to server. If this result comes out a figure which is not acceptable then no amount of tweeking of Forms will get it to run faster...You either need to upgrade the network to improve this; or change the style of application (e.g. to and HTML application) which will only ping the server on a POST/GET request but you lose a huge amount of functionality...and you need to ask your end users if they can live with that.
Hope that helps.
Grant Ronald
Forms Product Management

What is the basic requirement to use SIPServlet

Similar Messages

Maybe you are looking for