What is the benefit for geting minimac server?

What would one use the server OS for?
I pruchased the MiniMac Server, for the two 1Tb hard drives. I need to run Maverics on one, and Windows 7 on the other (for my needed PC based work software).
Can one link both respective email programs together?
What about iTunes, can I have just one library to be used my iTunes in both operating systems?
Thanks
Tom

Hi Tom,
As far as I'm aware,the drives are the only real difference.
If Gaming isn't the purpose of the PC side, than I'd consider these rather than Bootcamp so you can run both OSX & Widows at the same time...
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac
VirtualBox...
http://www.virtualbox.org/wiki/Downloads

Similar Messages

What is the order for upgrading exchange server 2013 SP1 servers to CU7?

Hi All
I am planning to upgrade my exchange server 2013 SP1CU4 to CU7 . As per my understanding , we always proceed with the CAS servers and then the Mailbox Servers during up-gradation.
But I am confused now , since I have seen articles stating , that the Mailbox servers has to be upgraded first and then the CAS servers in exchange 2013.
What will be the correct order . My environment consists of 2 Mailbox servers in DAG and 2 CAS servers (Exchange server 2013 SP1)
Thanks in Advance .
Joyso Senior Messaging Admin

Hi Joyso,
The Microsoft recommendation regarding the order in which the Exchange 2013 server roles should be installed or Upgraded is Mailbox and then CAS.
It makes sense as the CAS Role is a stateless server and all major components are held by the Mailbox Role.
Until a 2013 mailbox server comes online, the CAS server is pretty much useless. Hence, the recommended installation order in 2013 is the reverse of 2010 – Mailbox role first & then CAS
Note: If your DAG have more nodes, you need first upgrade all non-PAM nodes and then upgrade PAM node.
Some References:
The recommendation from the Product Group is to install Exchange 2013 Preview Mailbox Role first, and then the
CAS role.
If you're separating your server roles, we recommend installing the Mailbox server role first.
Upgrade your Exchange 2013 server roles in the required order. First, upgrade Mailbox servers
and then upgrade Client Access servers. -Upgrade DAG Mailbox servers
Exchange 2013 Server Roles Installation Order – Mailbox First:
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

What is the url for executing PL/SQL via 9i http

what is the URL for 9i http server pl/sql routines that I just compiled? I don't run 9ias just the 9i http server
http://machine:port/?????????/procedure_name
thnx
endre

do this if you are still having problemd
CREATE AND SETUP NEW USER
The second step is to create an application user that will
own the code for this example. Connect to SQL*PLUS as a user with
DBA rights, and execute the following commands:connect
SQL> CREATE USER user IDENTIFIED by user;
SQL> GRANT CONNECT, RESOURCE TO user;
CONFIGURE DAD IN THE PL/SQL GATEWAY
The third step is to create a new DAD.
Enter the PL/SQL gateway configuration menu. The generic address to the
page is
http://<machin:port/pls/admin_/gateway.htm
The is specified in your plsql.conf file. By default the address
will be
http://..:/pls/admin_/gateway.htm
(Replace ..: with the valid entry for your
configuration, e.g. www.acme.com:8080).
Click on the link 'Gateway Database Access Descriptor Settings' to access
your DAD settings. Then press the link 'Add for WebDB 2.x configuration'
to create a new DAD. Enter the following values:
Parameter Value
Database Access Descriptor Name give name
Schema Name the user you created
Oracle User Name the user you created
Oracle Password the password of the user
Oracle Connect String <- found in your
tnsnames.ora
Document Table documents
Document Access Procedure user.package.procedure
Extensions to be uploaded as LONG RAW
Leave the other parameters as they are. If you are not using an 8i database
or need to use the LONG RAW datatype for
some reason, you can place an '*' in the "Extensions to be uploaded as LONG
RAW" field. You can also limit this to
specific file name extensions such as jpg or pdf by entering the extensions
and using a comma to separate the
values. Click the OK button to save the DAD configuration.
Hope this helps

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

What is the benefit of configuring the XSS Homepage Framework for ESS

What is the benefit of configuring the XSS Homepage Framework for ESS?
Over using standard iViews.

It means you can disable (or enable) the exact functionality your customer needs rather than sticking with the default implementation.
Most customes do not use everything available from ESS or MSS. Switching it off (making it unavailable) is WAY better than leaving potentially unconfigured content to be accessed by users. SAP generally do not handle the error cases and you will get lots of nasty stack traces .....
Haydn

What is the benefit of using J2EE for webservices?

(I posted this on google news group, but no one answer, sorry for the cross post)
This maybe obvious to some of you, but after I went over the
webservices tutorial from Sun, about XML RPC and JAXM, I don't know
what is the benefit of using webservices within J2EE container.
Please tell me about it.
My assumption is that RPC and JAXM both enables the communication, but
the managing of session, persistent, thread pool, connection pool,
database, etc, are all handled by the container. Well, I still hope
my assumption is true. However, from what I read, the tutorial does
not even mention the word beans. So, how to get a beans to talk the
JAXM language so that I can get all of the above features? Or am I totally off track here? if an enterprise bean is not needed, then how to get all the above benefits that the J2EE offers?
By the way, does Sun's RPC and JAXM has things such as quality of
service (such as request time out). They mention guarantee delivery,
but if a reply to my query come 5 minutes later versus instantly, then
I probably lost a customer already. RPC also has big limitation, Corba has asynchronous request, but Sun's RPC does not.
Thank you in advance for all comments and help.

Basic communication aside, J2EE is mostly a synchronous run-time environment. When asynchrony is introduced, a whole new set of infrastructure requirements is needed to support QoS and commercial-quality implementations. In other words, it's not just about API anymore, it's about reliable communication, exception handling, time outs, etc. You may want to look at this Q&A to see some of the benefits provided by J2EE as underlying run-time for orchestration:
http://searchwebservices.techtarget.com/ateQuestionNResponse/0,289625,sid26_cid511195_tax292928,00.html
Doron\
Download Collaxa 2.0
http://www.collaxa.com

What is the benefit of using clipping paths for a knock out?

I found a posting saying they need someone to knock out the background of a lot of images using clipping paths. My question is, WHY use a clipping path? I know the rule of not using a selection tool such as the Magic Wand and then turning it into a clipping path and I know why that is. But if all is needed is for the background to be knocked out, why can't we just use the selection tool in the first place and just knock out the background from there? What is the benefit of that clipping mask?

Usually the term Clipping Path refers to turning a path into a clipping path (in the paths panel) for use in older programs such as PageMaker that don't support transparency.
For example if one wanted to import a file into PageMaker and only have a certain part of the document visible, one would make a path (or selection) around the object
and turn the path (or selection) into a clipping path. Sorta the same results you see in photoshop using a layer mask or vector mask.
Also clipping paths are used in certain printing workflows.
Without seeing the posting it's hard to say what they meant and in photoshop 6 vector masks were labeled as Layer Clipping Paths not to be confused with real clipping paths.
Old versions of photoshop also used the term Group With Previous to denote Create Clipping Mask.
photoshop 6:
Photoshop cs6:
Anyway clipping masks and clipping paths are two different things in photoshop.
layer masks, vector masks and clipping masks:
http://helpx.adobe.com/content/help/en/photoshop/using/masking-layers.html
an example of creating a clipping path:
http://www.clippingpathspecialist.com/tutorials.html

What is the imcoming and outgoing mail server for list.ru

what is the imcoming and outgoing mail server for list.ru

Contact your email service provider for that information. It's not a Firefox support issue.

What is the process for SQL Server 2005 patch update

hi,
i have 2 production SQL Server2005 Database servers in cluster ,
what is the process for applying patches.
Saidireddy

In 2005 you can do it in two ways...
Method 1 :
With SQL Server 2005,
when you start installing cluster service pack (or hotfix), it must be launched on the active node(node
that hosts the instance). When installing the Setup will launch simultaneously "remote silence" on all passive nodes. All nodes in the cluster containing the SQL Server instance are updated in the same time.
Method 2: First you can install in passive node then you can install in the active node, In this way you can save your down time ( If you start in the active node it will check in the passive, and if its installed already then it skips that
and start applying in the active node ), but most of the DBA's follows only first method because they may not aware of this or just they follows Microsoft common method.
SQL 2008 and Later....
1. Apply the hotfix on pasive node N2
2. Reboot the passive node N2
3. Failover on SQL resource : the passive node become the active node
4. Apply the hotfix on the passive node N1
5. Reboot the passive node N1
Raju Rasagounder Sr MSSQL DBA

What is the URI for a Foreign JNDI or Server ?

Hello,
I don't understand how is it done ? What is the URI for a Foreign JNDI or Server ?
I put jms://localhost:7050/weblogic.jms.XAConnectionFactory/ForeignJNDI but i don't think it that.
Could you help me please.
Thank you.

Thanks. I'm sure when she's see's that i've added it to the registry she will remove it, but had to try.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT

I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What is the benefit of Using Data Adaptor

Hello
I wonder that What is the benefit of Using Data Adaptor ? I don't know TopLink Technology , inorder to using Data Adaptor I should know toplink but what is the advatages of using BPEL database adaptors in conditions thet I can make webservices by making plsql web services or exposing ADF application modules more easier?
I think that if I use Data Adaptor (based of Toplink) I can use JTA feature for transaction managment , am I thinking Correct?
for example I can invoke to webservice A and the B in BPEL process with two DB adaptores (by global transaction ) such that if A failes the process automatically roles back the B transaction without need that I manauly compensate the undo process
please help me ?

Thank you for your very useful comments about DB adapter
I tried again and I have Successfully deploy and test my DB adapter with using # for parameter.
But I have another question : We have ADF Application that using ADF bc for user data entry supporting in use case scenario , but we want to call web services (eg BPEL) in save operation instead of ADF application modules Normal commit !
If we want using Data adapter for persist the Data that user entered by UI , we must write a lot of Insert or Update statements in DB adapter because of lot of database entities.
How can we shorten this production scenario in our Project?

What is the patfrom_id for linux_x86_64

HI I am trying to find out what is the platform_id for a database running on the linux_x86_64 platform? I do not have a database if this type available to me and need to know as we are looking to use data guard to migrate an existing 10.2.0.3 database running on linux itanium platform (which is platform_id=11).
I have queried the v$transportable_platform view but I am unclear as to which platform_id is for linux_x86_64?
Can anyone please let me know what that is or if you could tell me if it is possible to use dataguard in 10.2.0.3 to migrate from linux itanium to linux x86_64.
Thanks, any help is greatly appreciated.

user520056 wrote:
HI I am trying to find out what is the platform_id for a database running on the linux_x86_64 platform? I do not have a database if this type available to me and need to know as we are looking to use data guard to migrate an existing 10.2.0.3 database running on linux itanium platform (which is platform_id=11).
I have queried the v$transportable_platform view but I am unclear as to which platform_id is for linux_x86_64?
Can anyone please let me know what that is or if you could tell me if it is possible to use dataguard in 10.2.0.3 to migrate from linux itanium to linux x86_64.
Thanks, any help is greatly appreciated.Read this:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm#i72053
The first one. But you can try if you want. Obviously if you have problems, Oracle Support could say "it's not supported".
John

What is the benefit for geting minimac server?

Similar Messages

Maybe you are looking for