What is the best 3G key for new macbook pro, what is the best 3G key for new macbook pro
I ve just buy a new macbook pro 13" and the Alcatel Key (3g) to connect web but it doesn't working.
My supplier told me is because of thunderbolt system.
the web is essential for my business
What can i do ? Which key i need ?
Yours sincerely
Florent
First the reason sounds like "tech guy doesn't know"
If your in Europe then I use Vodafone, and have been happy. I also tether my Android phone, depending whc has better reception (though the Android is free with easytether)
Similar Messages
-
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
We have always used one iTunes account and I want to crate a new account for my daughter. What is the best way to go about this and will she need to download free apps again?
Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with. -
I just got an Ipod Classic recently and downloaded Itunes. Got my music on my Ipod. My husband just got an Ipod Touch. I followed the directions on how to create a 2nd library and was able to load his music onto his Ipod. My problem is now I can not find my original library. I did what the directions said about holding down the shift key while opening Itunes and it still goes to the 2nd library that I created. How do i get my original library to come up? I tried several times with the same results. Please let me know what I need to do to be able to get into either library. Thank You.
Does the original library file still exist on the computer? Hopefully when creating the new library it was done in a seperate folder as I do not believe iTunes allows for two library files in the same location.
-
Anyone have any tips how to get started with address labels? I went to my address book, but it looks so time intensive. Can I mail merge addresses I put into a excell spread sheet to print labels??
Don't waste your time with formatting in any of those programs - creating two pages for cards, blah blah blah.
The best way to mail merge on a mac is using address book.
People think merging got harder, but apple made it easier - more intuitive. You don't merge mailing labels through a word processor - you do it through the program which houses the addresses. If the addresses aren't in address book yet, that's a snap.
First, go to your program/file with the addresses (pages, numbers, excel, etc.). I think it's easiest to use numbers.
make sure the column headings are set to Mac Address Book Standard Names - that way you won't have to spend too much time mapping them in address book. (if you're not sure what those are - open address book and just a view a card/record, or open pages or numbers and search in the help menu for the term "merge field names" and it will give you a list. They're pretty simple - things like "First Name" "Last Name" "Street Address" etc.
For christmas cards, I add an extra column under the heading "Note" and input "Christmas Card List" for every record.
Once your data is formatted with the correct column names, export the list to a csv file.
Open Address book in mac and import the list - make sure the columns match up with the correct fields.
It might ask if you want to overwrite or update - that's up to you.
If you know your christmas card list has the most recent address info, hit update.
Once the import is done it should take you to the front page for the address book in which you'll be given the choice to view Icloud addresses (if you sync those) and also the Last import. Any groups or smart groups you have will show up in the list too.
Click on Last import - make sure all the addresses and names you just imported are there. If not, something went wrong - go back and check your import field mapping. If all's good, keep rollin'. (it helps to scroll to the bottom of the import list to get the count of imported records)
Here, you can do one of two things - create a group or a smart group.
For a regular group - Highlight all the records on the right panel in your last import, then go to file > new group from selection. Rename your group christmas cards or something like that.
I prefer to create smart groups.
For that, goto file > new smart group. You'll come to a filter window. Click on the first drop down box and scroll to "Note." Then in the second drop down box choose "is" and in the third and final input box on the right, enter the text from the note column you created in the address list file. I used "Christmas Card List".
That will create a smart group, such that any time you enter a new address or contact in the address book with the note field that equals "christmas Card list" it will automatically be entered into this group.
Either way, you're only one step away from labels.
With that Christmas Card List selected in address book, go to print. When the print dialogue box opens, make sure to click on the button for show details toward the bottom left. That will open up your choices for style.
Under "Style" click on mailing labels.
Under "Layout" choose your label layout (i use avery 5160). It will show you a picture of the label and you can tell if it's the right one. You'll also notice the labels are being merged correctly, with one address per label, rather than one name for the entire page - like if you try to do this through pages.
Print away.
Hope that helps.
Craig -
I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?
NeuroBrain wrote:
Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
This is a common mistake and I highly advise against it.
1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
Seriously, have a read,
Most commonly used backup methods
it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
"Plan for the worst and the good will take care of itself" - Donald Trump -
After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX
Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?
The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David -
I need to move my library from my old computer to my new laptop (Windows 8). What's the best way to do this?
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2 -
What is the best practice for full browser video to achieve the highest quality?
I'd like to get your thoughts on the best way to deliver full-browser (scale to the size of the browser window) video. I'm skilled in the creation of the content but learning to make the most out of Flash CS5 and would love to hear what you would suggest.
Most of the tutorials I can find on full browser/scalable video are for earlier versions of Flash; what is the best practice today? Best resolution/format for the video?
If there is an Adobe guide to this I'm happy to eat humble pie if someone can redirect me to it; I'm using CS5 Production Premium.
I like the full screen video effect they have on the "Sounds of pertussis" web-site; this is exactly what I'm trying to create but I'm not sure what is the best way to approach it - any hints/tips you can offer would be great?
Thanks in advance!Use the little squares over your video to mask the quality. Sounds of Pertussis is not full screen video, but rather full stage. Which is easier to work with since all the controls and other assets stay on screen. You set up your html file to allow full screen. Then bring in your video (netstream or flvPlayback component) and scale that to the full size of your stage (since in this case it's basically the background) . I made a quickie demo here. (The video is from a cheapo SD consumer camera, so pretty poor quality to start.)
In AS3 is would look something like
import flash.display.Loader;
import flash.net.URLRequest;
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.ui.Mouse;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.display.StageDisplayState;
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
// determine current stage size
var sw:int = int(stage.stageWidth);
var sh:int = int(stage.stageHeight);
// load video
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
var vid:Video = new Video(656, 480); // size off video
this.addChildAt(vid, 0);
vid.attachNetStream(ns);
//path to your video_file
ns.play("content/GS.f4v");
var netClient:Object = new Object();
ns.client = netClient;
// add listener for resizing of the stage so we can scale our assets
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.dispatchEvent(new Event(Event.RESIZE));
function resizeHandler(e:Event = null):void
// determine current stage size
var sw:int = stage.stageWidth;
var sh:int = stage.stageHeight;
// scale video size depending on stage size
vid.width = sw;
vid.height = sh;
// Don't scale video smaller than certain size
if (vid.height < 480)
vid.height = 480;
if (vid.width < 656)
vid.width = 656;
// choose the smaller scale property (x or y) and match the other to it so the size is proportional;
(vid.scaleX > vid.scaleY) ? vid.scaleY = vid.scaleX : vid.scaleX = vid.scaleY;
// add event listener for full screen button
fullScreenStage_mc.buttonMode = true;
fullScreenStage_mc.mouseChildren = false;
fullScreenStage_mc.addEventListener(MouseEvent.CLICK, goFullStage, false, 0, true);
function goFullStage(event:MouseEvent):void
//vid.fullScreenTakeOver = false; // keeps flvPlayer component from becoming full screen if you use it instead
if (stage.displayState == StageDisplayState.NORMAL)
stage.displayState=StageDisplayState.FULL_SCREEN;
else
stage.displayState=StageDisplayState.NORMAL; -
I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB
I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want. -
What's the best way to transfer 11,000 photo's from my old mac to my new one?
What's the best way to transfer 11,000 photo's on iphoto to iphoto on my new mac. I've just spent 24 hours importing them onlu for it to say there is not enough space available - BUT I'VE JUST BOUGHT AN NEW UPGRADED MAC?
Don't import them.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.
Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark
-
What is the best value iMac config for hd video editing.? I was going to go for i5 3.1 ghz with 4mb ram, but should I go further? Thanks!
You have it currently installed? Can you go to the System Profiler and click on Applications (will take a while to populate) - take a look at your FCP and check what it says on the right - Universal, Intel, or PPC? It'll look like this:
If it's Universal or Intel, it'll run in Lion. However, the installer may or may not be PPC - that you may not know until you try to install. If you have it currently installed, then you could do what I did - move over all the files manually. I have a list of files for FCE and would assume they'd be the same with FCP: copy them from the old Mac and insert them in the very same spots on the new one.
Here is the list for FCE:
http://support.apple.com/kb/TA38198?viewlocale=en_US
(It was published for an uninstall, but worked like a charm). -
hi, my iphone 5 has refused to restore after i updated it to ios7 ...... it will not turn on, it will not restore i do get an error 21 mesg and i have attempted a couple of fixes from the net, but nothing seems to work . i have no acces to my phone it just is dead whats my best option, do i need to send it to apple ?
Hello Peter,
Thank you for using Apple Support Communities!
Error 21 is part of a range of error codes generally indicating that other software is interfering with the restore process.
Check out the troubleshooting from this article named:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
All the very best,
Sterling
Maybe you are looking for
-
ATV1 not displaying in iTunes "speakers" for streaming.
Ever since the last update for itunes, my ATV1 is not showing up in the speaker list on my main itunes page, which I use to stream music from computer wirelessly to stereo. My ATV1 DOES show up under my DEVICE listing on the itunes page and does see
-
HELP I created a newsletter from Pages - sent it out - those with PC's cannot open. What do I do?
I'm new to all this MAC system. I created a newsletter on Pages, sent it out and now getting emails saying no one can open it. DId I save it wrong? What to do? Thanks Rick
-
XML File in XSLT with dc:subject
Hi How to Read the XML File in XSLT is there any rule to read what is this dc:subject can any one give me a sample code to read this in XSLT for a jsp page <?xml version='1.0' encoding='UTF-8'?> <record xmlns:dc="http://purl.org/dc/elements/1.1/"> <d
-
HttpClusterServlet Proxy Plugin problem - Weblogic Express 10
Hi, I am using Weblogic Express 10 version. I am trying to configure HttpClusterServelet in one of my test machine. I have a Admin server and 3 Managed servers which are part of clusters. I have a test war file which is deployed on to the cluster. I
-
How can I turn off my subscription to The Times UK
Have managed to turn off my subscription to The Sunday Times but am still being charged for the Times. How do I turn off?