What Is the best 650w modular power supply on the market

I have looked at the evga supernova 650g but read a lot of bad reviews, I have also looked at the corsair hx650, although it is not fully modular they are said to be made for gaming and have good reviews. I think I am willing to spend around £110.  Here are my important PC specs.
Intel core i7 4770 3.4ghz (socket 1150)
Asus sabertooth z87
EVGA gtx 760 FTW w/ acx cooling
Samsung spin point 1tb 7200rpm hard disk drive
I would prefer to buy a 650w i case I ever SLI my gtx 760

Quote from: badboy2k on 07-December-13, 01:18:21
a i7 4770 and i7 4770k difference is the K version is unlocked that's the difference!
rule of thumb with them is non k skews are locked to a single frequency and are limited as a result to close to intel specs and the K versions are unlocked and can be pushed harder as a result...
Thanks

Similar Messages

  • Looking to upgrade the video card and power supply in the K330

    Hello, I'm looking to upgrade the power supply and video card in the Lenovo IdeaCentre K330 but I need to know if these parts will be accepted by the mobo.
    Here's the card name (no link, don't know if theres a restriction to off site links) ASUS 2GB GDDR5 DIGI+ VRM technology Graphics Cards HD7770-2GD5
    The power supply name follows: Xion High Performance 1000 Watt ATX Power Supply XON-1000P14F
    Thanks for reading, and extra thanks for a good reply

    Thanks for replying, I have looked into other PSU's and came up with this: XFX PRO750W Core Edition 80+ Bronze ATX 750 Energy Star Certified Power Supply
    Feedback? And main question is, will they both (video card and PSU) be compatible with the motherboard that come standard in the K330?
    I don't really have a need for the front panel except the power, and backontrack buttons.
    Also, the reason why I'm getting a high wattage PSU is because I might later decide to build my own PC with the upgraded parts, and put the old parts back into the K330

  • What's the best way to back up to the cloud?

    I am going to be traveling in the on a boat in Europe. Access to wifi could be limited and slow. I want to back up my photos and catalog to the cloud as there is potental to lose laptop and external drive. Since I have a 25 mp camera and will be shooting in Raw allot, there will be some big files as each photo could be around 27 gb.
    All of my files will be in the My pictures folder LR set up when I set up my new catalog. I planned to back up these folders to the cloud, then send just the new folders each time I add them to LR during import. Then I was going to have the catalog BK that is created each time you close LR  (just the data only is in this file) sent to the cloud as well.
    Then if my laptop is lost I can copy the back up catalog (just the data file) and the My Pictures file that has all my photos in folders to a new laptop and restore my catalog. I'm told by Adobe help that this won't work as the connection between the photos and the catalog back up will be lost.
    Is this correct? And if so, what's a better method.

    Thanks Jim, and yes I meant 27 mb.  Will be living on a sail boat so there is potential to lose both the laptop and external drive. The cloud was to be my 3rd copy
    Date: Fri, 20 Dec 2013 16:53:44 -0800
    From: [email protected]
    To: [email protected]
    Subject: What's the best way to back up to the cloud?
        Re: What's the best way to back up to the cloud?
        created by JimHess in Photoshop Lightroom - View the full discussion
    You really have images that are 27 GB each? I suspect you meant 27 MB. But, even then, I think cloud backup might be cumbersome. I would suggest carrying a small external hard drive. I have a 1 TB USB 3 drive that is really fast and very small. No external power supply. Plug it in, and copy the files. That's what I would do.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948781#5948781
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948781#5948781
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948781#5948781. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Lightroom at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How much phases power supply does the 875P Neo FIS2R got ??

    How much phases power supply does the 875P Neo FIS2R got  ?(
    And will it be enough for the Prescott  ?(

    Prescott will be made on a 0.09u process so it should use less power per MHz, I wouldn't worry about that.
    According to what I see it has 6 power regulators which usually means 3 phase.

  • How to use the Camileo H30 with Power Supply

    Hello
    First: excuse my english, im from germany ;)
    I have a Camilio H30. its was boughted used. I only got the camcorder & the original battery.
    no extras (like usb cable or original power supply)
    what i want: i need to film over some hours. The Battery cant make it. so i wanna use it with a power supply but when i put it in (throughh the mini usb a connector) the camcorder goes to charing mode (no actions are possible) but i want to use it fully functionality when power supply is connected.
    how do i handle it ??
    i got a power supply with 5V an 2,25A , i think its enough... or not??
    The Label on the bottum side from the camcorder tells me 5V 2A....
    Thanks 4 helping me :D
    greetz

    oh ok i thought this is possible because in the main manual at the part when the display icons being explaind they show a full, half-full, emtpy- battery and a power connector icon. they call it "gleichstrommodus" sorry i have only the german manual. in english it should be co-corent flow mode or ac power mode.
    im looking for a way to make the cam work with power supply only. i dont want to charge or even use the battery because i film over few hours ago and for that i dont need it.
    my old dv cam works when the battery was plugged out with ac adapter only. thats very nice for me.
    whatever. if this is not possible i sell this cam and buy another one ;)
    thanks for your help !

  • Replacing the MSI Mega 865 Power Supply

    Has anyone attempted to replace the power supply on the MSI Mega 865?  Is it ever suggested?
    I am currently looking at the following (http://www.tomshardware.com/firstlook/20040720/index.html) as a possibility, but I seem to recall that there is a special connection that is necessary for the HIFI 'always on' functionality.
    If you have successfully replaced the power supply, what product did you use?

    Quote
    Originally posted by Stu Online
    the mega psu has extra connectors to supply 12v power while the pc is off, so the cd drive works in hifi mode (i think!)
    Interesting, does that mean theres a possibility for modifying an existing PSU so that it also supplys 12V (i wouldnt be able to do this tho, dont know enough about this stuff  )

  • If plugged into the power supply, should the Cinema Display A1081 standby light come on without being plugged into a mac

    I was given an old Cinema Display A1081 a few years ago. I am trying to test it and want to know if plugged into the power supply, should the standby light come on without being plugged into a mac?  I don't want to buy a DVI to mini display adapter if it isn't working.  One thing I did do was plug Monitor power in and then the USB plulg into my PC laptop and my iPhone charger USB plug into the back of the monitor.  I am able to charge my iPhone this way so I know that the power supply is working. But I can't tell if the monitor itself is workign as no ligths are on. (PS:  I am purchasing my first Mac so I am a complete newb but very proficient with PCs) Thanks so much for your help.

    These Apple tech notes may help:
    How to use your PowerBook G4, MacBook Pro or MacBook with the display closed
    How to use your PowerBook G4, MacBook or MacBook Pro with the display closed and a Bluetooth keyboard or mouse
    Just a final question about Sleep mode - does this have any negative effects on the life or performance of the laptop? I'm so used to Shutting down the laptop each day that I worry about Sleep mode having some sort of drain on the components or something.
    There are only two practical differences between Sleep and Shut Down:
    1. Sleep will wake instantly, so you don't have to wait for startup.
    2. Sleep will drain a new, fully charged battery after several days without being woken or plugged in. If you shut down, the battery charge lasts much longer. Obviously, if you only sleep it overnight, you'll still have plenty of battery left in the morning.
    Don't sleep it more frequently than necessary, though. Frequently turning the backlight and hard drive off and on can shorten their life. Just do what's reasonable. I usually leave mine awake until I have to transport it in a bag, along with sleeping it overnight. On battery, I'll sleep it more often to preserve battery.

  • HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
    If it turns out you only have the media folder on the external drive then take a look at this post...
    tt2

  • I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

    I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
    From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
    I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

    Install the new drive in the computer.
    Install the old drive in an external USB or Firewire enclosure.
    Boot the computer from the Recovery HD on the external drive.
    Use Disk Utility to partition and format the new internal drive.
    Clone your external drive to the internal drive.
    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the Recovery HD on the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the Recovery HD then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
      1. Open Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your new hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status of
          the drive in DU's status area.  If it does not say "Verified" then the drive
          is failing or has failed and will need replacing.  Otherwise, click on the
          Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions from
          the drop down menu to one. Set the format type to Mac OS Extended
          (Journaled.) Click on the Options button, set the partition scheme to
          GUID  then click on the OK button. Click on the Partition button and
          wait until the process has completed.
      4. Select the volume you just created (this is the sub-entry under the
          drive entry) from the left side list. Click on the Erase tab in the DU main
          window.
      5. Set the format type to Mac OS Extended (Journaled.) Click on the
          Options button, check the button for Zero Data and click on OK to
          return to the Erase window.
      6. Click on the Erase button. The format process can take up to several
          hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
      1. Using Disk Utility still opened.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • What is the best way to take care of the battery?

    What is the best way to charge and use the battery so it lasts the longest over time? Does wall charger versus USB make a difference? Does topping off versus draining make a difference?
    Thanks!

    My understanding is to charge the battery as soon as you're able to, without letting it drain completely and or often.
    With my digital SLR cameras, it's recommended by engineers that have studied Lithium-ion battery charging to not allow them to drain...or not allow them to fall below 50% capacity. If you charge them when you're able to, you'll extend the life of the battery. I see these results first hand.
    Funny, my sister uses the blackberry type 'smartphones' and she ALWAYS has battery issues. She runs down the battery, then plugs them in for a short time to get a 'quick charge', then proceeds to run the battery down again.
    Next thing you know, her phone won't last the day or half day on a charge.
    So maybe there is something to recharging as soon as you can and not allowing the battery to die on you.

  • What is the best printer for wireless printing with the iPhone?

    What is the best printer for wireless printing witth the iPhone?

    Roaminggnome has the list......pick on of those TERRIBLE printers and go for it....
    I hope Apple see fit to broaden this list, because, having thrown away several of those brands in my life, I now have a network compatble BROTHER printer that's awesome,
    "There's an app for that," ie the BROTHER, but you can only print pictures and soforth.
    Apple, step up, open up the list of printers we can use!

  • What is the best NLS config to be near the ACCESS or SQL Server characters set

    Hi all,
    I am working with an Oracle for Windows.
    I have serious problems with my actual characters set.
    What is the best NLS config to be near the ms-Access or SQL Server characters set behavior ?
    For exemple :
    I have a table with city names
    I want to find the nearest >= city name of a given criteria. so i do this SQL
    SELECT Nom FROM TLCommune WHERE Nom >= 'LIMOGES' ORDER BY Nom, Pays, Dept, Insee
    This SELECT give this result under SQL plus worksheet (same via VB and ADO)
    Why the cities from krosno to Limerick are listed regarding on the WHERE clause Nom >= 'LIMOGES' ?
    NOM
    krosno
    La Manche et la Mer d'Irlande
    Laesv
    Lancashire
    Landes
    Lappi (Lappland)
    Latviya
    Legnica
    Leicester and Rutland
    Leipzig
    Leningrad
    NOM
    Leon
    Lirida
    Leszno
    Liberec
    Libiria
    Libye
    Limburg
    Limburg (Limbourg)
    Limerick
    LIMOGES <--------------------------------------- the city in the nom >= 'LIMOGES' in the SQL statement
    LIMOGES-FOURCHES

    Hi,
    Try these steps:-
    * Open the GUI of Root bridge
    Go to Security/SSID Manager/create SSid/map it to the radio
    * Under Client Authentication setting
    Check the box Open authentication with no Addition ..
    * Then click Apply
    * Go to Ecryption Manager page
    Under Ecryption Modes
    Select Cipher ---TKIP
    Under Encryption Keys
    Select Encryption Key 2 ------Don't put any key ... Leave the box blank and key size be 128bit
    Then click Apply
    * Come back to SSID Manager page
    Under Client Authenticated Key Management ..
    Select Key Management:- Mandatory
    Check the box:- WPA
    Under WPA Pre-shared Key:- Type atleast 8 character key..
    Click Apply:-
    * Then we need to repeat the same settings on Other bridge except the station role will be non-root.
    Now to troubleshoot...
    * First make Bridge are able to talk to each when there is on security setup
    * Set a simple Pre-shared Key ... example 1234567890 on both bridge .. Bridge will not associate if key mismatch..
    Hope this will work for you.

  • Music - I play music at my kids hockey games. What's the best app so I can see the most songs on a play list?

    Music - I play music at my kids hockey games. What's the best app so I can see the most songs on a play list?

    Music - I play music at my kids hockey games. What's the best app so I can see the most songs on a play list?

  • What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    tacbob wrote:
    Are there any tutorials? I cannot find anything close.
    http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
    The MacBreak Podcasts are an excellent source of info!
    Have a look on the others ..

  • What is the best and easiest print app for the iPad and iPhone?

    What is the best and easiest print app for the iPad?

    Richard-
    The best and easiest is to use the iPad's built-in AirPrint system with an AirPrint-capable printer.  <iOS: AirPrint 101>
    If you do not have an AirPrint-capable printer, all printing Apps are a compromise.  I have an HP non-AirPrint printer connected to my WiFi router.  The free HP App, ePrint Home & Biz works OK with photos.
    Print n Share and PrintCentral each have their own browser, mail, text and photo programs that work well with the printer, but they can only be accessed from within other programs that have the "Open In" option.  (So far, I think GoodReader is the only App I have with that option.)
    You can run a program like Printopia or FingerPrint on your computer that will share its printer as AirPrint over WiFi.  They both are reported to work well.  However your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

Maybe you are looking for