What is the Best Android Smartphone? (All Opinions Welcome)

I currently have a HTC thunderbolt that i have used for the last two years. It is getting to where it needs replaced. What is the current new phone best suited for business use. Phone, text, multiple email accts, contacts, calendar, etc? I don't use for games or music, videos, either.
>>Minor edit due to branching from an earlier discussion<<
Message was edited by: Verizon Moderator

Hard question to answer. One person's honey is another person's vinegar. My personal choice is the Galaxy Note II. Now to some people, the phone is too big. Some people think the s-pen is a waste. I do not find the phone too big, and I find myself continuously using the s-pen to write notes to myself (saves paper). If you can wait, the Galaxy Note III will be coming out soon and it's really better than the II. My opinion.

Similar Messages

What's the best option after all?

Hi, folks.
I finally put my hands on my Leopard UTD copy. Yeah, I know it took a lifetime. It's the price we pay for living in the 3rd. world, so, never mind...
I know this has been talked over and over, but I'd like to gather some clear ideas.
I'm aware that choosing either Upgrade, or Erase & Install or Archive & Install is a lot related to personal preferences, but which has shown itself as being less problematic? Which could be considered the ideal techinical choice?
Thanks a lot and sorry for bringing this back to surface again.
JP

I have been using Mac for 14 years. I have not once had the same success upgrading as clean install...
I have tried it a few times but after the upgrade something weird always turned up and I wound up doing a clean install...
You will be just fine doing a clean install... All you gotta though - is to back up your stuff that you need - like what you have in your home folder and applications etc..
Most applications need installation - so you'll need to install those again---
The following folder besides your home folder contains lots of stuff that you might wanna glance at before clean installing:
MacHD/Library/Preferences - This stores system wide preferences and many apps write authorizations preferences to this folder
MacHD/Library/Application Support - Lots of apps store their belongings here - EG - Logic Audio stores it's factory library here
MacHD/Library/Audio - If you are an audio person and have installed many Audio Units or Apple Loops this is the folder to look at....
Besides that most important stuff you'll have in your home folder and this you'll backup anyway...
I know this sounds like a lot but once you have done it once it'll leave you with a better overlook at your Mac and in the future you'll be knowing what to look for...
Good Luck

What is the best android app for OFFLINE voice commands (offline - not "Ok Google")?

Hi, I'm looking for a good app that allows you to assign a voice command, for example, "Call Mom" to the actions you would perform on the phone to dial Mom's phone number. I'm calling this "off-line voice commands." I do not want to have all my contacts stored on some cloud server and then let Google or something else to find it there and call the number for me. I want it all to take place internally, that is on my phone. This is sort of like recording a macro. There must be a good app that does that. Please don't give my instructions on how to use the microphone for Google to do this. You have to understand that I want to do this OFFLINE. A lot of people don't seem to understand that when you use Google for this, it's an online process. Samsung users say they have an already installed app called "S-Voice" that does this offline. It would be similar to that. Also found an app called "Utter" on the google play store, but it looks like it's in Beta. I've yet to download an app and was hoping other Xperia users found something already on the phone that does this. Oh and my Language and input setting is already set to "Default English" with speech output set to on. Thanks again. Chrissy

Trial and error, there are myriad options on the playstore https://play.google.com/store/apps/details?id=com.brandall.nutter&hl=en

What is the best HP printer with Time Capsule

What is the best HP printer (all-in-one) to use with an Airport Time Capsule?

Kappy is dead on correct about Bridge Mode as a requirement for the Time Capsule.
Do you know how to check to see if the Time Capsule is configured this way?
Next question.....you really should not try to have two wireless networks....one Arris and another Time Capsule.....unless it is absolutely necessary. Two wireless routers in close proximity can create wireless interference effects that can cause problems with either...or both...networks.
Best to turn off the wireless on one router to keep the chances of wireless interference between routers minimized.
Are both the Arris and Time Capsule providing wireless signals?

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

I have three iPhone 4 models purchased in late 2010 that all share the same iTunes account (apps, music, etc), but I can only update the software on one of the three iPhones. What is the best solution to manage these devices for software updates, apps?

I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?

I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?

HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

I had to reset my iphone 5 today because of software issues. what is the best way to restore all my apps?

I had to reset my iphone 5 because of corrupt software issues. now I am trying to restore my apps. So are returning. Some are not. Some are making me pay for them again! What is the best way to restor all the apps?

Sync them from your computer back to the iphone

What's the best way to import ALL of my photos (34k +) and then share?

*Part I - importing:*
I've got approximately 34,400 photos on a networked drive that I need to be able to control using iPhoto. I want these files to stay on the network drive, but also be controlled by iPhoto (organized by date). Right now our photos folder on the network drive is a bit of a mess, some folders are named by date only and some are named by the event itself ("birthday 2009", etc.). I want this naming to go away in place of the iPhoto method (by date only). FYI, I am familiar with how to get to the "original" and "modified" folders/files within the iPhoto Library.
Question: Is there a way to get iPhoto to organize the photos (all by date) an leave the original photos on the networked drive? or do I need to:
> Import ALL photos into my iPhoto with the "import photos into iPhoto Library" option checked (iPhoto copies all original files to my laptop hard drive)
> Then manually move the file structure (all new folders created - by date) back to my networked drive
> THEN...remove all photos from the iPhoto Library and re-import the newly organized photos from the network drive but unchecking the "import photos into iPhoto Library" option.
Right now, both of our MacBook Pro's use iPhoto to access those photos independently of one another (each laptop does their own thing). This also creates problems because when files are imported on my laptop they are saved locally (on my laptop) and not on the network drive, same goes for my wife's laptop. Then she's not able to see those new photos.
*Part II - sharing:*
I'm also in the process of trying to figure out the best way to share all of our photos between our different laptops. Using the "sharing" function in iPhoto isn't ideal since that requires both laptops to be on.
My understanding of sharing the iPhoto library itself (having it saved on the networked drive) between two laptops is that only one laptop can access this library at a time, or there's potential of having the files become corrupt (two laptops trying to access the file at the same time).
Question: What's the best way to share photos between two laptops?
Thanks in advance

RONBO
Is there a way to get iPhoto to organize the photos (all by date) an leave the original photos on the networked drive?
Yes there is. But I don't recommend it as a way of working with iPhoto.
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
The problems arise when you change the path to the Files. iPhoto has no way of reconnecting that path and you could find yourself resolving aliases one at a time for all 34k Photos.
Other apps, such as Aperture have a command to re-connect with the master files.
FYI, I am familiar with how to get to the "original" and "modified" folders/files within the iPhoto Library.
Good for you but never, ever access the files this way. Period. Within the iPhoto Package File there are no user sercviceable parts.
All your work gets done in the iPhoto Window. Everything you need to do can be done from there - and must be.
Then manually move the file structure (all new folders created - by date) back to my networked drive
Never, ever break up the internals of the iPhoto Package File. You'll break iPhoto if you do.
Also, what format is that Networked Drive? iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Question: What's the best way to share photos between two laptops?
If simultaneous sharing is your goal then you need to use a Media Server app. iPhoto isn't one.
The key really is the format of the NAS. IF you can make it Mac OS Extended (Journaled) then you can easily store your Library on it and share it. Otherwise you need to use another application for the job.
Regards
TD

Urchased a new desktop pc and I want to move itunes and all files including IPAD apps to my new computer and delete off my old one. What is the best way to do this?

I just purchased a new desktop PC and want to move Itunes and all my Ipad Apps to new computer, and delete off my old computer. What is the best way to do this?

Hi,
See Here for Transferring your iTunes Library
http://support.apple.com/kb/HT4527
Make sure Everything is working to your satisfaction Before Deleting anything from your old computer...
Cheers,

What is the best way to create a Scheduler app for ALL mobile devices?

I've used indesign to make apps before, (more like interactive/digital publications) and now I'm trying to make a scheduling app. What's the best way for me to accomplish this since it's a little more intricate? Indesign + DPS?? Any other recommendations?

Skipping InDesign & using HTML5/something such as Appcelerator's Titanium would be your best bet.
If you're set on using DPS, however, you'll need to make multiple multi-folio apps, single issue apps aren't supported iPhone or Android. DPS folios are also not responsive, although in some cases renditions will scale to support different devices.

What is the best virus protection for all my Apple products?

I have seen ads for Norton 360, McAfee and others that offer virus protection for all your devices. I am looking for protection for:
Mac Pro
MacBook Pro
Mac Mini
iPads
iPhones
If you know what is the best for a smooth running system and providing protection please let me know. My system is acting flaky (Mac Pro) and Wanted to start with Virus protections.

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

What is the best method to provide an option to select "All" for LOV ?

Some posts sugest that you should "UNION" the origional select with something like (select "all" from dual ) this works as a seperate query but if you want to use and existintg query this is not very clean as viewlinks are not taken into account. We could also pass back an array list and include the all option in the list but that gets away from having the client use the iterator in the pagedef for other requirments of the page.
Whats the best way to approach this with the new features in 11g?

How to BackUp > http://support.apple.com/kb/ht1766
Key2Paradice wrote:
What is the best method to backup an Iphone 3G ...
Note:
The iPhone 3G can only update as far as iOS 4.2.1
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

What's the best way to handle all my data?

I have a black box system that connects directly to a PC and sends 60 words of data at 10Hz (worse case scenario). The black box continuously transmits these words, which contain a large amount of data that is continuously updated from up to 50 participants (again worst case scenario)
i.e. 60words * 16bits * 10Hz * 50participants = 480Kbps. All of this is via a UDP Ethernet connection.
I have LabVIEW reading the data without any problem. I now want to manipulate this data and then distribute it to other PCs on a network via TCP/IP.
My question is what is the best way of storing my data locally on the interface PC so that I can then have clients request the information they require via TCP/IP. Each message that comes in via the Ethernet will relate to one of the participants, so I need to be able to check if I already have data about that participant - if I do then I can just update it, if I don't I need to create a record for the participant, and if I havn't heard from one for a while I will need to delete it. I don't want to create unnecessary network traffic. I also want to avoid global variables if possible - especially considering that I may have up to 3000 variables to play with.
I'm not after a solution, just some ideas about how to tackle this problem... I thought I could perhaps create a database and have labview update a table with the data, adding a record for each participant. Alternatively is there a better way of storing all the data in memory besides global variables?
Thanks in advance.

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What is the Best Android Smartphone? (All Opinions Welcome)

Similar Messages

Maybe you are looking for