What is the best approach to connect MDM server.

Hi Experts,
       There are sevaral ways to connect MDM server from EP
1) Using JNDI look up
2) Throgh SystemAlias
Which one is best among performance wise, and can any body explain advantages and disadvantages
of all three.
Regards,
Sandeep.
Edited by: sandeep_ca Reddy on Aug 4, 2008 9:43 AM

Hi Sandeep,
Kindly go through the link below for information on
Accessing MDM Repositoryu2019s Data and Edit It, Create New Records through Portal
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40ac1b5b-d33e-2b10-5892-b29c890eaa01
This article uses the method of System Alias.
The second link gives you info on
Looking Up Enterprise Beans
http://help.sap.com/saphelp_nw04/helpdata/en/38/3e5a4201301453e10000000a155106/frameset.htm
I have done the EP integration with MDMusing System ALias. However I hav'nt done it using JNDI Lookup.
Hence it will be difficult to compare the performance of both the process. However, while working with System Alias, the performance was quite good as easily you can connect to the repository in a MDM server and then perform the User mapping. The fiurther process can be understood in the article mentioned above.
Hope it helps.
*kindly reward points if helpful
Thanks and Regards
Nitin Jain

Similar Messages

  • What's the best approach for handeling about 1300 connections in Oracle.

    What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
    1.Using separate schema s for various type users(We can store only relevant data with a particular schema.     Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema     Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
    OR
    2. Using single schema for all users.
    Note: All users may access the same tables and there may be lot of records than previous case.
    What is the Best case.
    Please give Your valuable ideas

    It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

  • What are the best approaches for mapping re-start in OWB?

    What are the best approaches for mapping re-start in OWB?
    We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    We have number of mappings. We built process flows for mappings as well.
    I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
    How do we re-cycle failed rows?
    Are there any builtin features/best approaches in OWB to implement the above?
    Does runtime audit tables help us to build re-start process?
    If not, do we need to maintain our own tables (custom) to maintain such data?
    How did our forum members handled above situations?
    Any idea ?
    Thanks in advance.
    RI

    Hi RI,
    How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
    If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
    In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
    but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
    What will happen if m3 fails?Process is suspended and you can restart execution from m3.
    By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
    What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
    With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
    Oleg

  • What is the best approach to capture TBOM's for a SAP SRM system/functionality?

    Hello SCN Community,
    It would be much appreciated if somebody could share some information about the following....
    What is the best approach to create TBOM's for a SAP SRM system? The SRM functionality is basically consisting out of multiple ABAP Web Dynpro's that are connected as a process via a SAP Portal (as is understand it). The entrypint to the SRM functionality is via the SAP Portal.
    Do I first have to create a link to the Portal via an SAP Web Application link in SOLAR01 and then start recording? Will it record only the portal objects or also the ABAP Web Dynpro objects?
    Do I have to list all the separate ABAP Web Dynpro's in SOLAR01 and use those as a starting point?
    I am myself more familair with more classical SAP ABAP ECC systems and transactions.  I could hardly find any information on the use of BPCA and the required TBOM's in the area of SRM.... Any help would be much appreciated!
    Kind Regards,
    Guido Jacobs

    Hi Guido,
    today was a new blog released, maybe this helps:
    BPCA - Powerful Risk Eliminator
    Best Regards,
    Christoph

  • What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

    What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

    I don't use it but it does say this in the help section...

  • What is the best way to connect a MacBook Pro to my HiFi system ?

    Hi,
    I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
    Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
    My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5  CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ? 
    I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
    Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
    Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
    Thanks in anticipation of some advice.

    What is the best way to connect a MacBook Pro to my HiFi system?
    Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
    The Mac's  analog audio in/out ports doubles as a optical in/out ports.
    The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
    Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
    To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
    Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
    I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
    It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
    If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
    If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

  • What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

    What is the best way to connect my new MBP to a computer monitor?  DVI, VGA or HDMI?  Thanks

    I recommend the Apple MiniDisplay Port to DVI adaptor.  I would avoid VGA.  MiniDisplay Port to HDMI will work as well (3rd party).
    http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

  • What's the best way to connect the audio out of my Mac to my stereo receiver?

    I want to listen to my mp3 collection through my home theatre stero receiver.
    I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
    I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
    I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
    The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
    I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
    I even hear these flaws when I listen to headphones through the headphone out of my mbox.
    Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
    I got this one from monster thinking it should work. No dice.
    So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
    Why might I be getting these clipping distoritons?
    any advice would be fantastic

    It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
    http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
    However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
    http://www.apple.com/itunes/airplay/
    I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
    http://www.apple.com/airportexpress/
    You can even find refurbished ones on Apples website for about $79.

  • Hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    1080i or 1080p

  • What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

    What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

    If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

  • What is the best way to connect MBP 13" - (non retina) to HDMI TV input

    What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
    ...To get Video and Audio? With one cable ...
    I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
    I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
    I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
    Thank you!

    Look for something like this:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
    Ciao.

  • What is the best way to connect PumpWorks to Labview? DDE or OPC

    What is the best way to connect quizix PumpWorks to labview?
    PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or  DDE?
    Solved!
    Go to Solution.

    Hi.
    If the instrumet can communicate with an OPC server I think both methods are fairly equal.
    There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
    http://zone.ni.com/devzone/cda/tut/p/id/4531
    http://zone.ni.com/devzone/cda/tut/p/id/7450
    -Tom

  • What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

    what is the best way to connect my ipad to the high speed inernet connection in a hotel room

    every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
    As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
    most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

  • What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    It should be possible to network them easily.
    Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
    The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
    You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet.

  • What is the best way to connect macbook running sling adapter to the tv

    what is the best way to connect macbook running slig adapter content to the tv

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

Maybe you are looking for