What is the best BPM analyzer?

What is the best BPM analyzer out there for Windows and Itunes?...I have 70,000 songs so would like a fast analyzer.

Bobby,
We can't say what is the best, but the other popular one to use in iTunes besides Mixmeister (referenced by Local Stain) is beaTunes BPM Detection:
http://www.beatunes.com/itunes-automatic-bpm-detection.html

Similar Messages

What is the best netflow analyzer to verify bandwith utilization ?

Dear Friends
what is the best netflow trafic analyzer to check the bandwith utilization for each host?
how im can receive email for high taffic ?
obs : im need the best software and that can show the at last month
im like the manage engine netflow analyzer , but im dont know how im can identify and rename the interfaces
http://demo.netflowanalyzer.com/netflow/jspui/application.jsp?iI=935&app=SourceIN&groupID=-1&showIN=true&ipgroup=&ipGroupName=&view=global&bussView=
Thanks
Almir

938864 wrote:
Hi Kayaman,
Sorry but I don't agree with you on verification part, Why not I can verify it ? to me default means value when I don't specify -Xms and -Xmx and by the way I was testing that program on 32 bit JRE 1.6 on Windows. I am also curious significant difference between 128MB and 870MB I saw, do you see anything obviously wrong ?That spec is outdated. Since Java 6 update 18 (Sun/Oracle implementation) the default maximum heap space is calculated based on total memory availability, but never more than 1GB on 32 bits JVMs / client VMs. On a 64 bits server VM the default can go as high as 32gb.
The best way to verify ANYTHING is to address multiple sources of information and especially those produced by the source, not some page you find on the big bad internet. Even wikipedia is a whole lot better than any random internet site IMO. That's common sense, I can't believe you put much thought into it that you have to ask in a forum.

What is the best tools for analyzer VoIP

I need ur help, i looking the tool helps analyzer VoIP in WAN/TDM. What is the best tool for Cisco System or wich recommends.
Thxs!

Hey turbot,
Thanks for contacting National Instruments support. Each set of the vis you mention are the latest, and some use similar methods to do the FFT than the other. The SMT is usually the best in most applications. There is also another option in the case of scope, you can fetch FFT data from the driver. The FFT is not actually implemented in hardware, but in the driver, and this is transparent to the user. It's simpler to use, but not as efficient as the SMT.
I hop this answers your questions. Let me know if I can be of further help.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

What is the best practice to display info of completed task in process flow

Hi all,
I'm starting to study BPM modeling with CE7.1 EHP1. Thanks to the tutorial and example on SDN site and I can easily build my own process in NWDS and deploy to server, start it, finish it.
I like the new runtime which can show a BPMN diagram to the processors. However, I can't find a way to let the follow up processor to review the task result completed in previous step. I'm more familiar with Guided Procedure, and know there is "Display Callable Object" which can used to show some info of a completed task when the processor/owner/admin/overseer click on a completed task. Where is the feature in BPM ? What is the best practice to show such task information in BPM environment.
For example, A multiple level approval process, the higher level approver need to know the comment written by the previous approver. Can he read this information from process flow ?
I think it is very important feature for a BPM platform. In Guided Procedure, such requirement can be done with Display Callable Object + View Permission, and you just need some coding for the UI. If BPM is superior to GP, I think there must be a way to achieve this, I just do not know how ?
Can anyone shed me some light on it ?

Oliver,
Thanks for your quick reply.
Yes, Notes and Attachment CAN BE USED for the purpose. But I'm still looking for a more elegant solution.
With the solution of using Notes/Attachment, the processor need to give input at two places : the task UI and Note/Attach , with similar or same data. It is really annoying.
Is there any SAP BPM real-world deployment ? None of customer has the requirement ?

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

What's the best way to cleanly stop Goldengate?

For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
Thanks,
Shankar

shiyer wrote:
For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
For routine maintenance/upgrades, just {noformat} "stop er *" {noformat} should be preferred; and when all processes are stopped, mgr can (optionally) be stopped. If you really are waiting endlessly for this to return, the real question is "why": then, perhaps there are other parameters that can be adjusted to make GG stop more quickly. (On the other hand, {noformat} "stop mgr!" {noformat} is harmless, the "!" simply prevents it from asking "are you sure?" before stopping the process.)
I really wouldn't use "kill" unless you really have a good reason to (and the reason itself requiring the process to be killed should be analyzed & resolved). To "kill" a process shouldn't cause data loss (GG always maintains checkpoints to prevent this) -- but still it seems unnecessary, unless there really is something that should be killed. (Aside: I mean, I can kill -9 / "force quit" my browser and/or 'halt' my laptop every time as well, and it would probably be "faster" to -- but it can cause issues (and wasted time) upon restart: i.e., fsck, recover sessions, whatever. Same basic idea, imo.)
There's a reason there are different commands to 'stop' processes (stop vs. stop! vs. kill). Just for example, "stop replicat !" causes current transactions to be rolled back; there typically is no reason for this, you'll just restart that txn when the process is restarted; might as well let the current one finish. And "kill extract" (I believe) will not warn about potentially "long running transactions" that can cause (painful) issues at startup (missing old archive logs, etc). There are probably other examples, as well.
So if this really is "routine", then "stop", don't "stop!" or "kill". If there are long delays, see why first & see if they can be addressed independently. (This really is just a stock answer for a generic question, it would be irresponsible for me to answer otherwise :-) )

What is the best way to monitor taffic across a Campus?

I am trying to find the best way/ways to monitor traffic across a campus network. The two solutions I have thought of are using Netflow or ERSPAN. However, neither are supported by the devices in this network. Here is a quick overview of the network...
Core Switches (3750 Stacks) using Layer 3
|
Distribution Switches (3750 & 3650s) using L3 towards Core and L2 towards Access
|
Access Switches (Mostly 3500s) using L2
What are the best options for monitoring traffic on this type of network? All links between switches are Gig, so we have plenty of bandwidth. I would really like to be able to setup snort/ntop or something similar.
Are there any solutions available that I could use RSPAN and a monitoring computer at the Access Switches and have them report back to a central monitoring machine? I would prefer a centralized solution.
Thanks,
Garrett

Hello Garrett
Each monitoring software has its own limitations/specifications..
If you want to monitor traffic/protocols running on ur network, on a constant basis, you will have to use Netflow.. You can use a simple netflow collector, and collect reports, and analyze the application traffic on your LAN/WAN.. Not sure if this will help too much in troubleshooting, since this will be more used for trending your applications. You can probably discover new applications, which arent used much on your network, using this..
But for real troubleshooting, you will need something like a syslog server.. u can configure logging levels and push important errors/updates from the cisco gear to this box. In case your box goes down, or has issues, system log messages will be dumped to this server and will be a very useful device for troubleshooting... eg, kiwi cat, solarwinds, 3cdaemon, and lots of other freewares...
I would ideally have both these components on my network, for trending and troubleshooting..
apart from this, if you have other advance technology products, like wireless, application accelaration etc, there are other network management solutions available..
Hope this helps.. All the best.. rate replies if found useful
Raj

HTTP 500 + FAULT   - what is the best way to deal with in a BPE?

Symptom
    When calling a service through a SOAP call in PROXY TO SOAP interface (Assync/ Sync) using BPE
     1 - SAP ECC -> ASSYNC -> SAP XI/ PI -> BPE (SYNC) -> Bus Service (ORACLE)
     2 - SAP ECC <- X <- SAP XI/ PI -> BPE (SYNC) <- HTTP 500 <- Bus Service (ORACLE)
X - BPE doesnu2019t deliver to error at SAP ECC cancels the flow to avoid SYSFAIL
Note
    What is the best practice in this case to return the error to the ECC?
1 u2013 It develops an ABAP program to read the database XI/ PI response in search of the Payload (fault).
2 u2013 It tries to map the exception and continue the flow even with HTTP 500
3 - It is possible to map http500 + fault (BPM)?
regards
Ronaldo

Hi
In an integration between SAP ECC and a legacy system (CRM-System not SAP) was used PI SAP and Oracle solution (ServiceBuss)
SAP ECC -> SAP PI -> SERVICEBUS -> CRM
ABAP PROXY TO SOAP (ASSYNC/ SYNC)
Symptom
When the IP receives a response from the service consumed an error HTTP500 flow is terminated, but without being able to treat. For example, reading the payload attached to the error and returned the same to the ECC
Doubts
Is it possible manipulate the contents of the exception received from the service consumed (http500)?
I made some attempts, but without much success!
Regards
Ronaldo de Moraes

What is the Best was to create a newsletter application using BEA / Documen

Hi,
I have some queries.
What is the Best was to create a newsletter application using BEA / Documentum
The newsletter will be republished and users will see new content every month. We plan to use BEA portal 8.1 sp3 with Documentum 5.3Sp1 / SCS.
The content of newsletter may be coming from data sources, we will combine this content plus some static content, and publish to Documentum using BEA's CM SPI implementation for Documentum. To connect to different data sources we will use registered table feature of Documentum. Anybody can suggest the best to achieve this or any suggestion or any samples....
How can we create our custom portlets which can use Documentum registered table feature to connect to data sources.
Thanks for the help,
Sudhir

I assume that you are thinking about using the 'n" wireless version of the AirPort Express, or the "new" dual band AirPort Express.
Simply connect each Express one at a time via Ethernet back to the Ethernet switch and use AirPort Setup to configure the device. Other than entering a device name for each Express, AirPort Setup will do everything else for you automatically. You will be amazed at how easy this will be.
I do not want to use the "Extend Range" feature, as it trys to link the express back to the extreme via wireless.
Sounds like you might be a bit confused here. When AirPort Setup recognizes that the Express is connected via Ethernet, it will configure the Express to "extend" using an Ethernet connection....not wireless.
In other words, Apple devices can "extend" using wireless or Ethernet connections. AirPort Setup analyzes the connection and chooses the correct settings for you.
If you later go back in and check the settings for the Express using AirPort Utility, you will see that it has actually been set up to "create" a wireless network using the same wireless network name, same security and same password as the main router. The Express will also be in Bridge Mode to work correctly on the network.

What is the best way to schedule a job for PI interface?

Hi,
I have this PI scenario to implement.
Every day, something (?) needs to trigger PI to call RFC function, get the data and insert it to database.
What is the best practice to schedule such a job in PI?
I want to know best practice to trigger PI interface and how to schedule it.
Also, do I have to use BPM for this?
Thanks for your help.
-Won
Edited by: WON HWANG on Sep 10, 2010 11:21 PM

Hi Won,
it depends a bit on the scenario that needs to be implemented. I will try to go point by point and give you the options
1. You will need to send a message to PI
     - This can be from PI or from ECC. I suggest you use an ABAP proxy client.
     - You will need to write an ABAP program that sends this message (calling the proxy client).
     - You can schedule this program in a job (SM37).
     - If users want control over the job, better schedule it in ECC; if only you or an administrator will control the job, you can do it in PI
     - I would use a generic format which you can reuse to trigger other interfaces: From- and To-date, Context, Action, User
     - You can have conditions in the Receiver Determination and Interface Determination to route the message to the correct interface, based on the Context and Action for example.
     - From- and To-date can be used to make selections in any RFC or table query.
2. You will need a BPM process in PI
     - Step 1: Receive the trigger
     - Step 2: Call the RFC
     - Step 3: Send to database
this is because the RFC call is synchronous, and you cannot route the response to another receiver than the sender of the RFC call. Another options is writing a wrapper in ECC around the RFC function, and at the end implement another PI ABAP proxy client that will be routed to your database interface.
Hope this helps.
kr
Peter Glas

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

What is the Best Safari Version for OS 10.9.5 Maverick on a MacBookPro, 2.4Ghz, 8 GB Mem.?

What is the best Safari Version for OS 19.9.5 Maverick on a MacBook Pro. 2.4 Ghz, with 8 gb memory?

The best version for Mavericks, in fact the only version, is an integral part of OS X. In other words you already have it.
Its version number is 7.1.5.
Keep OS X up to date: Update OS X and App Store apps on your Mac - Apple Support

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

WHat is the best index type for non uniqueness / Varchar columns in SQL 2008 R2

Hello All Greetings,
Please help me here with my doubt,
in my table i have two columns about a million rows, it has about 20 columns in it, three columns with name as Period, Gender so most of the time these two columns use in where clause,
Gender will contain Either M or F , Period contains YYYY-Month (2013-December, 2013-August) etc so i would like to add a Index to these two columns so that in will increase the performance, so please let me know what type of indexes i need to add to
these columns in the table,
please note that only one time we will add data to the table which will take only 2 minutes but we query the table every day
so my question what is the best index type that i need to create on columns with non uniqueness values in the column.,
Thank you In Advance,
Milan

There is nothing whatever wrong with creating an index on a VARCHAR column, or set of columns.
Regarding the performance of VARCHAR/INT, as with everything in a RDBMS, it depends on what you are doing. What you may be thinking of is the fact that clustering a table on a VARCHAR key is (in SQL Server) marginally less efficient than clustering on a monotonically
increasing numerical key, and can introduce fragmentation.
Or you may be thinking of what you have heard about writing JOINs on VARCHAR columns - it is true, it is a little less efficient than a JOIN on numeric type, but it is only a little less efficient, nothing that would lead you to never join on varchar cols.
None of this does not mean that you should not create indexes on VARCHAR columns. A needed index on a VARCHAR column will boost query performance, often by orders of magnitude. If you need an index on a VARCHAR, create it. It makes no sense to try to find an
integer column to create the index on - the engine will never use it.
Check this reference: http://stackoverflow.com/questions/14041481/is-it-good-to-create-a-nonclustered-index-on-a-column-of-type-varchar
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

What is the best app to convert youtube video to iTunes format

WHAT IS THE BEST APP TO USE TO CONVERT YOUTUBE/FACEBOOK VIDEO TO ITUNES COMPATIBLE FORMAT

Many video converters support to convert youtube and facebook videos to itunes supported formats. Some good ones for Mac users are:
iFunia video converter
Enolsoft video converter
iSkysoft video converter
Aneesoft video converter
and more....

What is the best BPM analyzer?

Similar Messages

Maybe you are looking for