What is the best codec to import MOV?

is there any fixed codec for keynote?
or what is the recommended codec in keynote?
i'm using photo-jpec and sorenson3 codec,
there is delay after movie started.
i wanna make the movie start immediately transition overed.
-my mov file is 1920*480.
Message was edited by: shinwhan

Welcome to the forum!
On the one hand, I may not be fully qualified to answer you, because I have no knowledge of codecs, either what they are or what they do, and have never used them. On the other hand, I use movies often in my KN presentations with no problems.
First, I import the movie into iTunes. Then, when I want to insert it into a KN presentation, I find it through the Media browser, and drag it onto the slide. (I suspect I don't need to import it into iTunes, and could drag it, or otherwise insert it, from wherever it resides. But all that's secondary.) If I want the movie to start immediately after the transition, without delay, I don't apply an animation to it. And that's exactly what happens: as soon as the slide before is finished, the movie starts. I can do this for full movies lasting an hour or more, but I usually just want a piece of a video, which I get by editing the original movie in QT.
I hope my low-tech answer helps you.

Similar Messages

  • What is the best setting for export movie in widescreen format?

    Please tell me what is the best setting for exporting movie in Widescreen format?

    Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
    Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
    Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
    However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
    bogiesan

  • What is the best way to import photos from aperture to my new Lightroom

    What is the best way to import photos from aperture to my new Lightroom ?

    See if this helps
    http://lightroomsolutions.com/articles/migrating-from-aperture-to-lightroom-where-do-i-beg in/

  • 24p from a DVX 100 - What are the best ways to Import / Export

    Hi Everyone,
    A friend of mine did some shooting on his DVX100 on 24p. He then captured them to avi files. I have the files on my hard drive. What is the best settings when importing these files and what should my settings be for exporting. I want to eventually watch it, when I'm done editing, on a big screen tv.

    I have the same problem. I have a bunch of footage captured on Premiere Pro that I have imported into FCP 6. Other than having to modify the timecode to match the original timecode I haven't had a problem editing with the footage. It looks good to me as far as quality goes.
    I have yet to output to DVD and watch it on a real TV yet, but if it looks this good in the canvas I'm hoping it looks good on TV.

  • What's the best way to import my itune library from iMac to macbook air?

    what's the best way to import my itunes library from my imac to my macbook air?

    Use Migration Assistant to copy your entire user folder from old computer to new computer.
    -> http://support.apple.com/kb/HT4889

  • What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

    What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

    This question is largely answered by the following thread...
    https://discussions.apple.com/message/17805700#17805700

  • What is the best way to import my iTunes music to my new iMac from XP PC.

    HI
    I am setting up my new iMac running Mavericks. What is the best way to import my iTUnes music from my XP PC? I have an external drive I could use.
    Chris

    Hi
    Thanks for that. But do I have to us the external disc, moving it from PC to Mac or is there a better way?. Can you directly connect the systems. I assume wifi is too slow as the size is about 10G
    Chris

  • What is the best way to import word documents from a PC to the Ipad2

    What is the best way to import word documents from a PC to the Ipad 2?

    You first need an app on the iPad that supports word documents - the iPad doesn't have a file structure like a 'normal' computer, and every file/document needs to be associated with an app. If you don't have such an app then options include Apple's Pages app and third-party apps such as Documents To Go and QuickOffice HD. How you then get the documents on the iPad will depend upon the app that you have/get as different apps may use different methods e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

  • What is the best method to import my iPhoto library from my macbook to my new iMac [27"]?

    What is the best method to import my iPhoto library from my macbook to my new iMac [27"]?

    You can copy your iPhoto Library to an external hard disk, USB flash drive, or other media (depending on the size of your iPhoto library). Then, you'd copy the iPhoto Library from that media to the same location on your iMac.
    Using the Finder, navigate to your Home folder (or click on Go from the menu bar and click on Home). Open the Pictures folder, select your iPhoto Library and then from the menu bar choose "Edit" and then "Copy". Then navigate to your external disk, click on "Edit", and then click on "Paste".
    Then, insert your media on the iMac, and copy the iPhoto Library from your external media to the same location on your iMac (the Pictures folder located under your Home folder).
    Hope that helps, have a great day.

  • What is the best way to import a full database?

    Hello,
    Can anyone tell me, what is the best way to import a full database called test, into an existing database called DEV1?
    when import into an existing database do you have drop the users say pinfo, tinfo schemas are there. do i have drop these and recreate or how it will work, when you impport full database?
    Could you please give step by step instructions....
    Thanks a lot...

    Nayab,
    http://youngcow.net/doc/oracle10g/backup.102/b14191/rcmdupdb005.htmA suggestion that please don't use external sites which host oracle docs since there can not be any assurance that whether they update their content with the latest corrections or not. You can see the updated part no in the actual doc site from oracle,
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1009381
    Aman....

  • How do I import DVD to IMovie? What is the best way to import DVD to a Mac?

    Hi everyone!
    I need some help, so here are my questions.
    How do I import DVD to IMovie? What is the best way to import DVDs to a Mac?
    I would like to keep the original quality from the DVD.
    Thx.

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

  • What is the best way to import my VHS or Laserdisc Movies into iTunes??

    What is the best way for me to import my vhs movies and laserdisc movies into itunes so I can store them for my family to keep??
    Any suggestions would be great.
    If I get them into itunes I would like to be able to view them on my Apple tv via the computer.
    Can this be done???

    csnolan wrote:
    What is the best way for me to import my vhs movies and laserdisc movies into itunes so I can store them for my family to keep??
    I know this is an old thread, but I've been researching ripping my Laserdiscs to my Mac.  Did you ever get it worked out?  I've been reading here about the Grassvalley ADVC300 to capture and convert analog video to digital.  Still learning about it.  Also, here's a wiki that has a lot of information about ripping laserdiscs:
    http://www.noobelodeon.org/w/How_to_Rip_Laserdisc

  • What is the best codec to use when importing video into Premiere?

    I have recently aquired Premiere cs6 and want to use the best possible format to edit with. I am going to use footage that I film with a DSLR (5D mark III) so I know the codec will be H.264. My question is: Is H.264 the best codec to use? Or, is there a better codec that Premiere likes to use?
    Thanks!

    >recently aquired Premiere cs6
    Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    And, A tutorial list in message #3 http://forums.adobe.com/message/2276578

  • What is the best way to import and edit a large amount of footage?

    Hello Apple world,
    As a newbie to Final Cut 10 I have a question regarding best ways to import footage. I'll give you a quick run down.
    I have a 150 gig of gopro footage that I just hit 'import' to recently (from my external HD), it took around 10 hours to process it all.
    Its all under one event, but then somewhat organised into dates etc. But it is very slow. I imported it all at once because it was all footage from the last 6 months of my Whistler/states/fiji trip and want to make a movie out of it, using clips from all over the time, not just in chronological order.
    I have the latest mac book pro, 4 gig ram,2.4 GHz i7, 750 hard drive, with nothing else on the computer.
    Ive read about creating proxy media, after ive imported, but am still somewhat confused as to the benefit. Does it create duplicates? that will fill up my pretty large HD as it is!
    Can you suggest any ways that might make my laptop run a bit faster? Should i delete and work directly from external HD etc etc?
    Any suggestions will be greatly appreciated!
    Thanks in advance
    Harlee

    ascreenwriter wrote:
    Hello,
    I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline.  I want to know the best way to retain resolution before I delve into this project.
    My questions:
    1)  What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
    2)  What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
    3)  What is the best way/ codec/ format to import and export/ render between premiere and after effects?  I am speaking mostly of vfx and color correction.  I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
    I know this is pretty broad, but as a solo filmmaker I really need someone's guidance.  I rarely ever finish my films with the same, crisp look as the footage.  I need pipeline help, and really appreciate it!
    1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
    2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
    3. Use the Replace with Adobe After Effects Composition function.

  • What is the best way to import and export footage from the 5D Mark II?

    Hello,
    I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline.  I want to know the best way to retain resolution before I delve into this project.
    My questions:
    1)  What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
    2)  What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
    3)  What is the best way/ codec/ format to import and export/ render between premiere and after effects?  I am speaking mostly of vfx and color correction.  I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
    I know this is pretty broad, but as a solo filmmaker I really need someone's guidance.  I rarely ever finish my films with the same, crisp look as the footage.  I need pipeline help, and really appreciate it!

    ascreenwriter wrote:
    Hello,
    I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline.  I want to know the best way to retain resolution before I delve into this project.
    My questions:
    1)  What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
    2)  What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
    3)  What is the best way/ codec/ format to import and export/ render between premiere and after effects?  I am speaking mostly of vfx and color correction.  I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
    I know this is pretty broad, but as a solo filmmaker I really need someone's guidance.  I rarely ever finish my films with the same, crisp look as the footage.  I need pipeline help, and really appreciate it!
    1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
    2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
    3. Use the Replace with Adobe After Effects Composition function.

Maybe you are looking for