What is the best codec to use to get optimum video quality?

I need to get my FCE2 project on to DVD, garnering the very best video quality/ clarity the software can muster. What do I use?

As you can read in a similar thread, the best way to my knowledge is simply to:
- export to QuickTime Movie (not to QuickTime Conversion) from FCE HD: this will not change the quality of the movie (no compression involved)
- use any authoring DVD program: I use iDVD and it is more than enough for me: this will encode the movie to MPEG2.
The results are very good at least for non professional use. Otherwise you have to have DVD Studio Pro.
Piero

Similar Messages

What is the best codec to use when importing video into Premiere?

I have recently aquired Premiere cs6 and want to use the best possible format to edit with. I am going to use footage that I film with a DSLR (5D mark III) so I know the codec will be H.264. My question is: Is H.264 the best codec to use? Or, is there a better codec that Premiere likes to use?
Thanks!

>recently aquired Premiere cs6
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
And, A tutorial list in message #3 http://forums.adobe.com/message/2276578

Data Recover From Formatted Drive? What is the best program to use to get back Logic Projects and any other file type?

I was in the process of reorganising my hard drives so I could RAID them however I managed to corrupt one drive and had to format it which meant I lost all my Logic Files and some other files. I managed to save a lot of files (mainly video files) before I had to format the drive but I need a Data Recovery service that will not alter anything on the hard drive and will put all the formatted files (regardless of the type) back for me so I can get the rest of the ones I need.
Thanks in advance.

What about folders and such?
No. FS doesn't reconstruct folders. However, Data Rescue does, depending on how you use it. About the only thing in Data Rescue a Quick Scan ever seems to show you are files that are already live.
So that leaves you with a Deep Scan, or a Deleted Files scan. The first pass of a Deep Scan will attempt to retrieve folders and files, along with their original names. The second pass only looks for file patterns. Like recognizing a Photoshop .psd file. It will recover it, but give it a nonsense name. A Deleted Files scan only results in nonsense names of recognized file types; no folders.
What were you using File Salvage on? A hard drive?
Yes, though you can use it on a flash drive, or any other mounted drive.
At the moment it is estimating 289 hours remaining on a 1TB drive. Can it not go faster?
No, both of the software mentioned are slower than molasses in January. When you delete anything in Windows, its file table entry simply tagged as deleted. So to unerase them, the tag is removed. That's why it works to quickly and easily (assuming you haven't already overwritten the data to be recovered).
In OS X though, the whole idea of the underlying UNIX structure is all about security. It's not supposed to be easy to retrieve deleted items. When you delete items, their file table entries are erased. So the only way to find deleted items is to scour the entire drive for BOF (Beginning Of File) markers that don't have a matching starting block to anything that is in the file table.
Another question, half the drive was empty. Will it fly over that empty space or will it sieve through it incase there was some files stored on it?
If you use the Expert mode is FS, you can choose to do that:

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

What is the best cable to use to connect my MacBook Pro to my LG HD TV

What is the best cable to use to connect my MacBook Pro to my LG HD TV?

Read the tv user manual to see what they recommend.

What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

Csound1 wrote:
Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
The OP said they plan to store movies on the external drive.
Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
At least with exFAT there is no fee to Redmond, at least not yet.

What is the best way to use a cellular enabled iPad in France?

What is the best way to use a cellular enabled iPad in France?

Frankly, I expect a bit more courtesy and details from someone wanting help from fellow users.
Don't use your AT&T SIM/plan out of the country for the iPad.
Just purchase a SIM in France for about 15 euros and use that.
-> http://www.tripadvisor.com/ShowTopic-g187070-i12-k4781004-o30-Prepaid_French_3G_ micro_SIM_for_iPad_it_s_not_a_problem-France.html

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

What Is The Best Setting To Use To Import Music?Please Help.

Hi, All
I have got an 80GB Apple Video iPod And I am still trying to figure out how to work it as I am new to using iPods.
What is the best setting to use to import CD Music and Music from the Internet to iTunes?? as I would like to listen to the highest quality there is on iTunes and my 80GB Apple Video iPod.
The settings are: ACC Encoder, AIFF Encoder, Apple Lossless Encoder, MP3 Encoder, WAV Encoder. If you have not got them to hand.
Many Thanks For Reading This And Replying To It, Much Appreciated!!
I Hope You All Have a VERY Merry New Year!!
Kind Regards, Rocky Robin

There really is no BEST setting. The "best" setting is the one that sounds the best to you.
Having said that, you also asked what setting provides the highest quality audio. In that case, you need to use a lossless format, such as AIFF, WAV, or Apple Lossless. MP3 and AAC are both compressed formats, and will not provide as good of an audio quality as a lossless format.
My personal preference would be Apple Lossless, but any of the lossless formats will produce an almost identical quality to the CD track.
Keep in mind, the files will be quite large.

What's the best flash to use for nighttime sports games?

What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

What's the best way to use your iPad instead of textbooks?

What's the best way to use your iPad instead of textbooks? I'm about to start a BSN program and have heard of using your iPad for textbooks instead of buying and carrying around 8 different books. Is there an app for that? Or do you buy or rent the books? What's the best solution?

Or, if you're like me and you want to do a lot of heavy reading, use the iPad because the low contrast on a Kindle is extremely fatiguing.
Seriously, though "screen glare will cause eye strain" is often taken as an article of faith, there's not a lot of good scientific evidence for it. "Eye strain" can be caused by concentrating on any close work for long periods of time. Looking up and focusing on something distant periodically is very helpful. Older CRT screens that flicker also can be aggravting. I'm not denying that some people find reading backlit screens uncomfortable. However, it's not dangerous. And, then, there are other people who find the higher contrast a backlit screen affords to be much less wearying over long periods of time.

Hello every one. Please let me know what is the best mouse to use in a Photoshop? Thank you very much. Alex.

Hello every one. Please let me know what is the best mouse to use in a Photoshop? Thank you very much. Alex.

My ArtZ II is on a Win2K supplemental computer. I think that the main reason that I keep it around is the 12 x 12 ArtZ II.
Next workstation will probably force that comupter into a closet and my beloved ArtZ II will probably go with it...
Even on my laptop out on the patio, if I have to do almost anything in PS, or Painter, I'll go grab my Intuos 2 and hook it up, even though it's a 9 x 12 and a bit big for the patio table (works fine on my various desktop situations though). I cannot be without my tablets, though I am not a fan of the Wacom mice that I have tried (2 still in the box). Best mouse is my Logitec cordless (hated its keyboard and got rid of it in a second), which has nice weight, the right feel for my hand and is just great. Still, I only use it for the duties that the Wacom is not the best at. If I open up PS, or Painter, the mouse sits idle.
Good luck to the OP,
Hunt

What is the best way for using a C++ in the EJB?

What is the best way for using C++ in the EJB ie
either 1. Socket programming
2. JNI

To what purpose?
To use C++ in the client you could generate IDL from your remote interfaces and run that through your vendor's IDL-to-C++ processor.

What is the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc. tiff? psd? 16bit? dpi?

What are the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc for editing?
Should I use tiff or psd?
8bit or 16bit?
How many dpi?

That will depend on the photometric resolution of your originals. For jpegs it would be a waste of space to convert them to a higher resolution than 8bit, but if your images actually have already more than 8bit, you will want to preserve this quality. Then he 16bit format will help to prevent color clipping.
Both tiff and psd will preserve the lossless workflow. With Photoshop as external editor I would use he psd format for better support of layers and transparency, e.g., when you want to create watermark files.
The dpi will only matter, when you export the file for printing.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

tacbob wrote:
Are there any tutorials? I cannot find anything close.
http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
The MacBreak Podcasts are an excellent source of info!
Have a look on the others ..

What is the best codec to use to get optimum video quality?

Similar Messages

Maybe you are looking for