What is the best codec to use when importing video into Premiere?

I have recently aquired Premiere cs6 and want to use the best possible format to edit with. I am going to use footage that I film with a DSLR (5D mark III) so I know the codec will be H.264. My question is: Is H.264 the best codec to use? Or, is there a better codec that Premiere likes to use?
Thanks!

>recently aquired Premiere cs6
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
And, A tutorial list in message #3 http://forums.adobe.com/message/2276578

Similar Messages

HT1550 What's the best formate to use when coping cd to computer

What's the best formate to use when coping cd to computer

If you will be using your music only in Apple products, choose the AAC Encoder with "iTunes Plus" format, which is 256 kbps.
If you will be using your music also in other players, programs, and devices, choose MP3 Encoder at 256 kbps.
Of course, if you have any special requirements, e.g. audiophile-quality equipment, you can vary the above recommendations.
As you know, the above selections are made in the Import Settings dialog in Preferences > General.

What Is The Best Setting To Use To Import Music?Please Help.

Hi, All
I have got an 80GB Apple Video iPod And I am still trying to figure out how to work it as I am new to using iPods.
What is the best setting to use to import CD Music and Music from the Internet to iTunes?? as I would like to listen to the highest quality there is on iTunes and my 80GB Apple Video iPod.
The settings are: ACC Encoder, AIFF Encoder, Apple Lossless Encoder, MP3 Encoder, WAV Encoder. If you have not got them to hand.
Many Thanks For Reading This And Replying To It, Much Appreciated!!
I Hope You All Have a VERY Merry New Year!!
Kind Regards, Rocky Robin

There really is no BEST setting. The "best" setting is the one that sounds the best to you.
Having said that, you also asked what setting provides the highest quality audio. In that case, you need to use a lossless format, such as AIFF, WAV, or Apple Lossless. MP3 and AAC are both compressed formats, and will not provide as good of an audio quality as a lossless format.
My personal preference would be Apple Lossless, but any of the lossless formats will produce an almost identical quality to the CD track.
Keep in mind, the files will be quite large.

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Whats the best codec to use when working with JPEG's

Hey all, I'm working on project that are scanned JPEGS @ 2K resolution. What codec would you recommend for the best resolution ? I've tried the Photo-JPEG codec, yet I still get render bar ?
The Photo-JPEG sequence setting, which is to my knowledge, just the same as the JPEG Pics, why does it still ask for me to render (RED OVERHEAD LINE) ? If the sequence is the same as the media, it shouldn't need to be rendered ... correct ?
Any help appreciated

If you are planning on doing any work on individual images, you will want them in a non-lossy format. JPEGS are recompressed every time you open the image and work on it.
However, if you are going to use the images straight from the cam without editing in Photoshop or the like, JPEGs can be ok. Just convert the image sequence to video before you import the material into FCP as still images take enormous resources within FCP.
I use Quicktime Pro to convert image sequences to a video file. It is much more efficient at it than FCP.
x

What is the best codec to use to get optimum video quality?

I need to get my FCE2 project on to DVD, garnering the very best video quality/ clarity the software can muster. What do I use?

As you can read in a similar thread, the best way to my knowledge is simply to:
- export to QuickTime Movie (not to QuickTime Conversion) from FCE HD: this will not change the quality of the movie (no compression involved)
- use any authoring DVD program: I use iDVD and it is more than enough for me: this will encode the movie to MPEG2.
The results are very good at least for non professional use. Otherwise you have to have DVD Studio Pro.
Piero

What's the difference between full & large when importing video?

In my preference menu, it shows I can import video as either full-original size or large-960x540. Does it make a difference in the size of the file, in the quality of the view, in what can be done with the file? Also, can I determine whether I want it imported as a .mov or .dv or .iprojectimovie? Thanks

since vers08, it is a well-known fact, that iM can not handle interlaced material, there are tons of threads on this topic alone on this board. and it seems as though, that iM does a very 'simple' de-interlacing, by dropping one field: 1920x1080i => 1920x540'p'
I don't like to go into detail, but modern hardware, beyond tubes and arial broadcast, doesn't use, can not handle interlace, any flat-screen, computer or TV, de-interlaces anyhow.
so, if you need for any reason, that extra horizontal resolution, keep it full, otherwise use large.
lubrom wrote:
... I apologize for my ignorance but what is the difference between a container, a media wrapper, codec and folder structure?
sorry for my ignorance, but you asked for it ... ( ? )
lubrom wrote:
... can I determine whether I want it imported as a .mov or .dv or .iprojectimovie?

What is the best device to use to import non-purchased music from iphone to ipad?

My problem is that I have a lot of music from CD's, etc. that I did not purchase from itunes that got lost from my computer but I still have on my iphone4. I want to sync my phone to my ipad so I don't lose this music entirely. Any help would be greatly appreciated. Thank you.

There are a number of legitimate 3rd party alternatives to iTunes for iOS device content management.
This is but one;
http://ecamm.com/mac/phoneview/

What's the best way to record live webcam video with Premiere CS6?

We are producing an online news show and will interview guests from all over the country. We will have them phone in using Skype and or their IPad. We would then do all of the post in Premiere. We would like to capture guest video from either Skype or an iPad using Premiere. Any suggestions for camera/software combinations will be appreciated. Thank you in advance.

I would not attempt to use Premiere Pro to capture live video. There are better ways.
Perhaps a screen capture utility that records to a lossless codec that is easily edited in Premiere Pro.
I use a free program (CamStudio-Recorder) but there are others. Since I have the drive space, I record to the Lagarith Lossless Codec. Premiere Pro cuts through it like a hot knife through butter.
If quality is not the issue, then there are other codecs you can use that are lossy, but still not too bad.

What is the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc. tiff? psd? 16bit? dpi?

What are the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc for editing?
Should I use tiff or psd?
8bit or 16bit?
How many dpi?

That will depend on the photometric resolution of your originals. For jpegs it would be a waste of space to convert them to a higher resolution than 8bit, but if your images actually have already more than 8bit, you will want to preserve this quality. Then he 16bit format will help to prevent color clipping.
Both tiff and psd will preserve the lossless workflow. With Photoshop as external editor I would use he psd format for better support of layers and transparency, e.g., when you want to create watermark files.
The dpi will only matter, when you export the file for printing.

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

Csound1 wrote:
Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
The OP said they plan to store movies on the external drive.
Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
At least with exFAT there is no fee to Redmond, at least not yet.

I have been trying to download and install a trial. What is the best browser to use and how do i do it?

I have been trying to download and install a trial. What is the best browser to use and how do i do it? The set up and everything is on the desktop but it never seems to load anything?

what file (name and extension) is on your desktop and what os?
what have you done to install the desktop file and what do you see when you do that?

What IS the best program to use to create an animation, that needs to be viewed in Powerpoint?

What IS the best program to use to create an animation, that needs to be viewed in powerpoint? Essentially i want to output a Movie File, so i'm guessing that Edge Animate is out of the question and it's not photoshop, more likely Flash?

So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

What is the best program to use to create an interactive pdf?

what is the best program to use to create an interactive pdf?

So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

What is the best codec to use when importing video into Premiere?

Similar Messages

Maybe you are looking for