What is the best equalizer settings for n97??

for listening through in-ear earphones...with superb overall sound(perfect bass and vocal .etc)...can anyone share with us some cool equalizer settings?...cause all of the default ones are just ok and vocals are very sharp...it'll be nice if any of you can post a snapshot of your awesome eq settings here so that i can do the same FYI:mostly i listen to R&B songs like ne-yo usher mariah carey etc thanks alot!=)

what may sound good to somebody else may not sound good to you
you can edit these presets and create your own and trial of changing these settings yourself is the best option
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • What are the best export settings for a HD video in Premier Pro CS4?

    Hi!
       I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
    FPS 23.98
    1920 x 1080, then a few lines down it says 1408 x 792
    16 bit,
    2 channels
    48000 Hz
       What should the settings be when I make a new sequence?
                 When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
    But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
    I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
    Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
    I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
    What are the best sequence settings for HD video?
    What are the best export settings for HD without loosing any quality?
    What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
    Thank You!
    http://forums.adobe.com/thread/713070
    On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

    It Stands for "Coder Decoder."
    Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
    This might be a bad analogy but I'll give it a try.
    A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
    In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
    Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
    I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
    Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
    I posted the link before but here it is:
    http://goo.gl/8GZq4i

  • What is the best export settings for mini DV?

    Hi folks,
    Love this forum, it has been a huge help for a novice.  I am looking for answers to a more tailored question.  I believe this will help others too!
    What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
    1. archive an exact duplicate without any quality loss of an imported mini DV tape.  My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
    2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
    I really appreciate you reading and considering response.

    First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
    2nd, read below for a "trick" that is required to export to tape
    Export to Tape http://forums.adobe.com/message/4699448
    Hardware MPE must be OFF to be able to export via Firewire
    http://forums.adobe.com/thread/902499
    http://forums.adobe.com/thread/880824
    Also CS6 http://forums.adobe.com/thread/1016269

  • What are the best optimization settings for Logic 9....

    Hey guys,
    I am running Logic 9 on a Macbook Pro 2.53GHz, Intel Core 2 Duo, 4GB RAM, OSX 10.6.4, with a AK1 soundcard. And I was wondering what the best optimization settings for this setup are?
    I have been having a few issues with drop outs in sound during playback, which is also carried over when i bounce the audio. I did some research and found my latency settings needed to be higher, so I set the I/O buffer size to 512. I am also running all samples from the local hdd, I was thinking maybe put the samples on an external drive. I also changed Logic 9 to 64bit mode.
    Does anyone know if this is right and anything else I need to do with Logic and/or the AK1??

    First, return to 32-bit mode. 64 bit still has some ß-issues and some features that are not working/disabled, and the only perk of 64-bit is that Logic can adress more than 4 GB RAM, which you don't have anyway.
    Samples on the startup drive is not a problem, unless you start using really big third party sample libraries, or zillions of EXS instruments. Some of the Logic content insists on residing on the startup disk anyway, better leave that where it is.
    If you have an external, use that to store your Logic projects, or, in other words, make it your recording disk (as recordings are stored in the project folder). You do record audio too, I assume? Anyway, if you get an external, make it a FireWire one, not USB. FireWire is much easier on the CPU, and +for audio (and sample-) streaming+ more reliable and faster than USB.
    If dropouts you hear during playback also show up in the (offline?) bounce, it is probably not a buffer issue, as the buffer is irrelevant for bouncing offline.
    So how many tracks and what kind of tracks in this project? Which plugins and how many instances of them?

  • What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

    Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
    I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
    WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
    (I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
    Rachael

    Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
    I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
    Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
    256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

  • What's the best security settings for publishing PDFs on the web while considering SEO still works

    I want to protect my PDFs from people editing them and publishing them under their names, but I also want search engines to be able to scan it properly for SEO purposes. What's the best security settings to use for the PDF to accomplish both?
    Thanks

    I am currently using WD 2TB Thunderbolt hard drive for my iTunes, which i love and is works great.  i am connected directly to my Mac Book Pro. I am running low on Memory and thinking of buying a bigger Hard drive.  My question is should I buy 6TB thunderbolt HD or 6TB NAS drive to work solely for iTunes.  I have home sharing enabled for my Apple TV 
    I also have my time capsule connected just as back up only.   

  • CS3 - What Are the Best Export Settings for Animation?

    I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
    What are the best possible settings that I can use to export the video to a .MOV file?
    A little background info, in case it helps:
    The animations were created in After Effects, and the .MOV files were made with the Animation codec.
    After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
    Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
    What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
    (And please don't be afraid to dumb it down.)
    Thx!

    Try an Uncompressed "QT" file.  (Component YUV - 10-bit)
    BTW: Did your PPRO Settings match the AEFX Comp you exported from?

  • What are the best sequence settings for a movie to be put on youtube?

    I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
    I have tried the following settings only to get a blurry image result in the end:
    Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
    Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
    Editing Timebase: 29.97
    Quicktime Video Settings:
    Compressor DVCPRO50 - NTSC
    Quality: 100%
    This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
    Thanks,
    Caleb

    Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
    If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
    Frame Size: 1280x720
    Aspect Ratio: HDTV 720p
    Pixel Aspect Ratio: Square
    Editing Timebase: 29.97
    Compressor: Motion JPEG A
    Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
    Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

  • What are the best sequence settings for anamorphic?

    sorry for the long explanation....
    i have a project that was shot 16:9. my question is what is the best sequence setting to use so that when i export it to tape it will look right on a regular TV? on the FCP viewer it looks right with either setting. the difference is that if i choose a regular sequence setting ("anamorphic" unchecked), the video clips need to be rendered (it's green, but it will limit my ability to add effects and watch them without rendering). therefore i would prefer to use the anamorphic setting that does not need rendering. However, when i export the movie it comes out stretched (and only works with TV that has an anamorphic setting).
    Can i edit the whole project with the anamorphic sequence setting and in the end copy it to a regular sequence without it becoming stretched?
    i tried this on a little test sequence and it appeared to work, but i'm afraid that if the project becomes elaborate... well, last time i tried editing an anamorphic sequence (a while back, on FCP 2) i had to redo my whole film cut by cut with a regular sequence setting and then render it anamorphic so that it will look right.... it simply didn't work to just cut and paste the project onto a new regular sequence (could this have happened because i had many effects?). it came out stretched as it would when you merely uncheck the "anamorphic" box. has this been solved in the newer versions?

    Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
    If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
    Frame Size: 1280x720
    Aspect Ratio: HDTV 720p
    Pixel Aspect Ratio: Square
    Editing Timebase: 29.97
    Compressor: Motion JPEG A
    Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
    Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

  • What are the best wireless settings for a WRT160N v2?

    I am trying to find out what the best wireless settings are for the WRT160N v2 to have the best connection with my PC (WUSB600N) and my PS3 gaming console.  Are there any suggestions on which channel I should be using, etc?  My PC and PS3 are about 30ft from the router and unfortunately, I cannot move the router.  I have really no obstructions from PC and PS3 to the router, but signal strength is low.  If anyone can enlighten me, I would much appreciate it.
    Thanks for your help!

    Here are some settings which you can set on your Router, and i think this should solve all the problem. As this is the same settings which i have set on my Router and its working perfectly fine.
     Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • What are the best export settings for TV?

    I'm making a video that i would like to have on TV and would most likely go through iDVD, i have a Panasonic mini-dv camcorder and all my footage is in 4:3. What would be the best export settings to accomplish this?
    thanks,
    rob

    From FCE, export a QuickTime Movie (do not use QT Conversion). If you'll create the DVD on the same machine, leave the "Make Movie Self-Contained" box unchecked for a quicker export. Drag the resulting QuickTime file into iDVD.

  • What is the Best Export settings for Uploading to Youtube?

    Hi, Im kinda new to this can someone pls help me find the best video quality for uploading in youtube. SO when i xport media and choos h.264 and hten go to any other format other than widescreen high resolution preset all my titles becomes choppy but when i choose that preset it seems to be okay but the resolution on youtube does not go above 480p.
    which format and preset combination do i choose in order to get on youtube 1080p without having my titles in the video all choppy?
    If im missing any info pls let me know
    Thanks

    I find the YT presets work very well.
    Choppy YT playback might be a poor Internet connection.  Post a link, I'll check here.

  • What are the best export settings for video with small text?

    I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
    THANKS!

    Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
    Try it out.
    Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
    It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

  • What are the best sequence settings for editing a movie made on your iPhone

    I have a lot of footage taken on my iPhone 3Gs. I want to make a summer fun movie and compile all the clips together. What are going to be my best sequence settings to make editing of the footage easy and viewable in real time without the need to render. Is this possible?

    Open the videos in QT Pro player and export to a codec and frame rate consistent with any easy set up such as NTSC DV and edit that.

  • What is the best Compressor settings for burning a 2 hour DVD on single layer disc?

    I have a 2 hour (120 minutes) project timeline which I want to encode in compressor to fit on a single layer DVD.
    Do I need to change the Bit Rate to make it fit on a single layer?
    Or can someone post the settings or link to where I can find the best settings?
    Thanks in advance,
    z

    Select "Best 120 minutes" and you should be good to go.
    x

Maybe you are looking for