What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

Similar Messages

What are the best export settings for video with small text?

I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
THANKS!

Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
Try it out.
Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

What is the best export setting for burning a dvd?

I am trying to export my senior thesis to a DVD, I've never burnt a DVD before and am using Adobe Premiere cs6.
I used a Canon7D 24fps to film and want the best quality of video and audio possible.
ALSO, after I've exported it, are there any other steps I need to take before burning it to a DVD?
Please help!

The best quality will be using an x264 encoder in CQ mode to create a Blu-ray.
Next best is exporting using an H.264 Blu-ray preset for creating a Blu-ray.
After that, exporting a lossless file for MPEG 2 conversion using the free HC Encoder using CQ mode, which will end up on a DVD.
Last in the quality lineup, export using an MPEG2-DVD preset, changing the Min, Target and Max bitrates to 5, 7 and 9 respectively.
Avoid Dynamic Link.

What is the best export option for video podcasting purposes?

Although Quicktime has an "Export to iPod" option, I was wondering if there was any better means to export from FCP or Quicktime for purposes of podcasting and YouTube posting to ensure best quality while containing file size.
Thank you for your help!

Felix,
use Compressor.
1)Look into Settings presets, towards the bottom. You have several options and the best for you comes from testing a few, just a few seconds each.
2)In inspector you can customize settings further.
Have fun,
G.

What is the best export setting from QuickTime Pro 7 for standard DVD

I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
I have tried both export and save-as. Neither has done a good job.
The internal information of the AVI movies are: (as reported by QT)
Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
I have used several settings with not much luck including:
AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
MPEG-4 Video, H.264
Should I be using a better application then QuickTime?
Is there a way to just use iDVD with the original AVI movies?
These are wedding movies and pictures that people are waiting for.

Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
I have tried both export and save-as. Neither has done a good job.
The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
Should I be using a better application then QuickTime?
How much are you willing to spend?
Is there a way to just use iDVD with the original AVI movies?
Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

What is the best Apple notebook for video editing and pro music creation?

What is the best Apple notebook for video editing and pro music creation?
I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

What is the best macbook pro for video editing dslr footage?

what is the best macbook pro for video editing dslr footage?

It is the GPU that is important. All the CPU's will be fast enough. If you can affords it, the 15" with the NVIDIA GPU is the best.
Ciao.

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

What is the best export settings for mini DV?

Hi folks,
Love this forum, it has been a huge help for a novice. I am looking for answers to a more tailored question. I believe this will help others too!
What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
1. archive an exact duplicate without any quality loss of an imported mini DV tape. My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
I really appreciate you reading and considering response.

First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
2nd, read below for a "trick" that is required to export to tape
Export to Tape http://forums.adobe.com/message/4699448
Hardware MPE must be OFF to be able to export via Firewire
http://forums.adobe.com/thread/902499
http://forums.adobe.com/thread/880824
Also CS6 http://forums.adobe.com/thread/1016269

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What is the best QT setting for iDVD?

Hi
I am making a Quicktime movie from a cut in Media 100. What is the best format to export for iDVD? I already tried exporting DV/DVC Pro - NTSC and it didn't look all that great (flickering and rippling on the DVD player.)
I am currently trying a straight best quality NTSC Video export. My cut is about 7:45.
thanks
JB
Dual 2 GHz PowerPC G5 Mac OS X (10.3.9)

Hi John:
Welcome to discussions!
I would use QuickTime Pro export settings, choose 'NTSC-DV' with a frame rate of 29.97. Choose 'No Compression' for audio and set the rate to 48.000 kHz.
Sue

What are the best export settings for TV?

I'm making a video that i would like to have on TV and would most likely go through iDVD, i have a Panasonic mini-dv camcorder and all my footage is in 4:3. What would be the best export settings to accomplish this?
thanks,
rob

From FCE, export a QuickTime Movie (do not use QT Conversion). If you'll create the DVD on the same machine, leave the "Make Movie Self-Contained" box unchecked for a quicker export. Drag the resulting QuickTime file into iDVD.

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What's the best compression setting for exporting video to DVD?

My QT self contained file from FCP is 13 GB (1:02 min long) when I use DV NTSC while exporting. When iDVD finished encoding it, it went down to 3.4 GB (that includes video files in my iDVD menus).
*Since the DVD media is 4.7 GB can I make better quality DVD by lessening compression while exporting from FCP?*
I don't think there is a way to tweak compression in iDVD. And my second question:
*Is "self contained" file better quality than just a reference file?*
*I would like to make the best possible quality DVD and am looking for some tips on what settings would help me achieve it.*

Hi Joby,
Compressor is what you need.
Import your file, choose DVD best quality 90 minutes from the settings tab (lower left window in Compressor). This will allow your movie to be converted as MPEG 2 and ac3 dolby stereo (best compression for DVD audio).
The inspector window (lower right window) will allow you to decide/arrange settings as you like.
If you are not sure about best bit rate choice use the [Bit Budget|http://www.kenstone.net/fcphomepage/bitbudget.html]
As you can see the inspector window offers a range of customizable settings if you are not familiar with those the manual (main menu>help>user manual) will answer all your questions. Simply type a word or definition in the search area and most likely the manual will provide the info you seek.
Self contained means that you create a file with exact copies from your original frames and edit on the timeline, a self-contained file becomes independent from your timeline. A reference movie as the definition says totally refers to your FCP project and wouldn't work on a different machine without referenced media files.
There is no difference in quality between the two QTmovie options.
Hope that helps
G.
PS. Extra info about Compressor and h the best way to create your DVD [here|http://www.kenstone.net/fcphomepage/fcp_homepageindex.html#dvd]

What is the best export setting for video on blogger

Similar Messages

Maybe you are looking for