What is the best GUI to run on a slow Laptop?

I have an IBM Thinkpad Pentium 3 it's kind of worn out I bought it second hand. Kde was stalling at initiation screen. Is Gnome lighter for a Laptop? What about Xfce? I still want to utilize all the good apps like firefox,xine,mplayer,yapg,etc. Can Fluxbox or Openbox run any high end programs?

krazybastid wrote:Flux box seems like something cool i've tinkered with it a little but didn't put that much time into it i think i'm going to have to take kde off my laptop.
I just wanted to add that the Fluxbox wiki is a good source for information on tinkering:
http://fluxbox-wiki.org
The manpages for fluxbox and fluxstyle are also quite helpful.
This is a good site for themes:
http://tenr.de

Similar Messages

What is the best way to run Sage on a MacBook Pro?

What is the best way to run Sage on a MacBook Pro? I am a first time Apple user.

There's a lot of Sage out thete so fill us in with information. If it runs on Windows then you'll need to create a partition on your mbp using boot camp and install Windows. So what is Sage for you?

What is the best way to run windows on my Mac? And What are the pitfalls I should watch for?

What is the best way to run windows on my Mac? What are the pitfalls/

If you need Windows as your main operating system you would be better off buying a Real Windows PC.
Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

What's the best Mac for running Final Cut Pro X?

Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.

Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
Last, I ordered a flash drive / SATA hard drive combo. (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
I put all of my media and FCP projects onto the SATA hard drive.
Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
This has worked for me. I wish you luck.

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

What's the best way to run Logic Pro from external hard drive.

What's the best way to run logic from external hard drive

Hi
Organism wrote:
Logic is designed to run from your Applications folder. I suspect if Logic was moved to an external drive, it might not be able to locate its assets, like loops and libraries.
As long the necessary files are in the correct places on the boot disc, you can run the Logic application itself fom wherever you like. It would not be recommended however, and there would be very little benefit (if any) in doing so.
CCT

What is the best browser to run oracle 10g forms

SALAM TO ALL MUSLIM BRITHERS
what is the best browser to run oracle 10g forms_

Hello Ady,
Hey not all of us have a religionok, I extend my statement to those with a different religion, atheists, agnostics and anybody who does not beliefe in a divine being of any kind ;-)
some of us are bright enough to be atheistsThe implicit statement of this is not better than greeting only users of a certain religion.
To the OP: I respect your belief, but we had the discussion about greetings in this forum before. To most users any relation to a religion is inapropriate and considered a violation of the Terms of Use, e.g. {message:id=9677530}.
Edited by: Marwim on 16.04.2012 07:56

What is the best way to run .exe files on my mac?

What is the best way to run .exe files on my mac? I need to run some updates for my john deere gps and the downloads i get can only be run on windows.

There are several options for running Windows software (*.exe files) on a Mac, depending what your program is, how often you use it, and your personal preferences.
One way that does not require Windows is an open source effort called WINE. Check out winehq.org. You may find that that's all you need for your programs. There is also a commercial effort that has grown from WINE, and you will find info about it on the site mentioned. These DO NOT require that you have and install Windows.
If you want to run sessions devoted only to Windows software, and want programs to run as fast as they do on a PC, the Apple's Bootcamp program is useful. With it you dedicate a partition on your hard disk to windows, and on startup choose to either boot into OS X or Windows. Each runs without any connection to the other. This requires you have a copy of the Windows software as well as the applications you want to run.
If you want to be able to easily exchange data between your Windows and Mac programs, and skip back and forth between the two, there are several emulators available that run on Mac OS X and create a Windows environment where many Windows programs can operate along side Mac programs. Parallels and VMwear are two comercial packages available for purchase and Virtual Box is an open source effort available for free. Google will find all three for you.
My only experience is with Virtual Box. It is slow and a bit clunky, but it is free and meets my needs for the very few "just got to have" windows programs I sometimes use.
Google is your friend on this and can provide a lot more, and better, information than I can.
Best of luck,
Ray

What is the best way to run windows on my mac?

What is the best way to run windows on my mac?
I have a particular program that i need to run, and it only runs on windows. I have a macbook pro

As Templeton noted, it depends and will at least be somewhat subjective.
There are basically three options out there. You can use a Windows emulator (Wine or the commercial version of it, Crossover Office), use Boot Camp to "dual boot" or use virtualization software (Parallels, VMWare Fusion, or VirtualBox). Each has its advantages or disadvantages.
The Windows emulators have the advantage of being the one option that doesn't need the purchase of a copy of Windows. Unlike Boot Camp, but like the virtualization options, this allows you to run Windows programs and OSX programs side by side. The big problem, though, is that it is the least compatible option--a lot of Windows software either has "issues" or will not function at all. The Crossover website has information on which programs are known to work and how well they are known to work.
Boot Camp is the option that Apple ships OSX with. You'll need a copy of Windows to install into the partition. You'll effectively divide your disk into two parts and have two machines. The major advantages are, first, you don't need to acquire separate software *AND* the Windows license. As well, it's the highest performance Windows system. What you have is truly a Windows machine. That's both the good and the bad--you aren't going to be able to use OSX software at the same time, and you have to reboot to get back to OSX. I've always thought it was best for someone who likes the Apple hardware and wants to use it for a Windows box--in that case Boot Camp is clearly a great solution.
Finally there's virtualization which seems to be the most popular way to handle Windows, especially if you need to run one vertical market package. It has the advantage of allowing you to use your OSX software at the same time, and the virtualization gives an extremely high level of compatibility. About the only thing that won't run is a virtualization package (and there's not a lot of reason to run that in a Windows VM). There is a performance hit compared to Boot Camp, but it's minimal for all but the most demanding applications (that being high end games).
It will chew up RAM on the OSX machine, but if you have at least 4 GB of RAM it will probably be manageable, especially if you only need to run one Windows program.
You will need both a virtualization program (there are three major ones) and purchase Windows. Two of three programs are commercial packages (Parallels and VMWare Fusion), while the other is an open source option (VirtualBox). Virtual Box has the advantage of being free, but it's by far the least polished of the group.
Which way is best? As was noted, it depends. I run VMWare Fusion on my machines, and I have used CrossOver Office for limited purposes. I've not yet seen, in my use pattern, a reason to go to Boot Camp but I certainly can see cases where it might make sense.

What is the best spec to run multiple programs with photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?

What is the best spec to run multiple programs with numerous photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?
For a Macbook Pro. What's the least amount I need to process, upload, download images using these 3 programs?
Thank you.
pt

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

What are the best options for running windows on a Mac Pro

what are the best options for running windows on a Mac Pro

For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox)

What is the best & cheap backup solution for a macpro laptop?

What is the best & cheap backup solution for a macpro laptop? easy & simple to use

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components: 1. A Time Machine preferences panel as part of System Preferences; and, 2. A Time Machine application located in the Applications folder. It is used to manage backups and to restore backups. Time Machine requires a backup drive that is at least twice the capacity of the drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

TS1474 What is the best way to run two iphones on the one computer?

I have recenty upgraded to an iphone 5 and my husband has taken over my 4S. However when trying to sync on itunes found even with different log ins for itunes some of my mail and photos ended up on his phone.
Have duplicated ITunes as a copy for one phone and still some data crosses over. What is the best method?
Laptop does not ahve library of our music installed to use as option.
Would apprecaite advice.

More than likely, your issue is sharing of iCloud information. You can run as many phones, iPads, iPods, etc as you want on one PC without issue.
Make sure you under Settings > iCloud that you have different IDs. You should also use separate Apple IDs, which can still sync to the same PC.

What's the best way to run FrameMaker 8 on a Mac?

What's my best bet for running FrameMaker 8 on a MacBook Macintosh laptop?
Can I run FM 8 directly under OS X, since it's a Unix app? Any special tricks to making it go?
Or will I need to run FM 8 under Linux or Windows? If so, I'll need to be able to copy and paste from one environment to the other. What are my options? Their pros and cons?
I'm switching from a PowerBook to a MacBook so I can run MacSpeech Dictate dictation software. Dictate ONLY runs on Intel Macs.
I currently use FrameMaker+SGML 6.0 in Classic. It CAN'T run on the Intel Macs.
I have over half a million words of FrameMaker files, including 7 volumes of cross-referenced research notes I add to almost daily. Since I am heavily dependent on FrameMaker's features, it's a must-have.
I haven't bought the MacBook yet, so if there are any hardware requirements I need to know about, or options I should consider or avoid, please let me know.

> If I understood him correctly, the Adobe salesperson I talked to
> yesterday runs the Unix version of FrameMaker directly under OS X
There is NO way to get the Unix (=Solaris) version of FM 8 to run
under OS X. It's an executable compiled for the SPARC processor,
and I don't think Apple has made a SPARC/Solaris emulator... :-)
/Thomas Michanek

What is the best way to run a powershell script with parameters in the Task Scheduler?

Hello,
Want to run the following from a scheduled task in the Task Scheduler on a server. What is the best approach?
.\pscript.ps1 -csvfile "\\Srv1\Share\File.txt"
Thanks for your help! SdeDot

Hi,
To run a powershell script with parameters in the Task Scheduler:
Program: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add argument (optional): -Command "& c:\scripts\test.ps1 -par1 2 -par2 3"
Hope the below two articles be helpful for you:
Schedule PowerShell Scripts that Require Input Values
https://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/schedule-powershell-scripts-that-require-input-values.aspx
How to Schedule a PowerShell Script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Yan Li
Regards, Yan Li

What is the best GUI to run on a slow Laptop?

Similar Messages

Maybe you are looking for