What is the best hard disk replacement for my notebook?

Hi, what hard disk replacement should i buy for my notebook HP G62-a016sl, considering the price/quality ratio? I would not want to spend more than 60 euros/dollars.
(if you want to know why i need it, see this post: http://h30434.www3.hp.com/t5/Notebook-Recovery/Creating-and-using-a-Factory-Recovery-Disk-of-a-simil...
 I'd would like to know an expert opinion. Thanks!)
This question was solved.
View Solution.

I finally got the second hard disk you recommended and i can confirm that the problem of the jerkily computer was the hard disk (almost failed) and not software. Thank you very much!

Similar Messages

  • What is the best hard drive replacement for a first generation mac mini 1.25 mhz 40gb hard drive 1gb ram year 2005

    What is the best hard drive replacement for a first generation mac mini 1.25  40 gb hard drive 1 gb ram year 2005?

    You posted this same question 24 hours ago, which has a reply.  Did you have questions on that answer or did you want further discussion? You could reply to that thread, there's no need to start a new thread.

  • K8neo 4 socket 939 cpu 3800 x2 amd what is the best hard disk

    k8neo 4 socket 939 cpu 3800 x2 amd what is the best hard disk
    for this confy
    i know maxtor has more problem
    so i ask to you
    what is the best hard disk 250 300 gb ?
    sata sata 2 ?
    i read about in some site but i can understand what is the best for this confy
    thank
    my english is Lol

    When we are talking about Quality and Performance the choice is:
    http://www.wdraptorx.com

  • What is the best Hard Disk Configuration?

    Hi all!
    I've been reading the forum for some time, and now I decided to build my new PC for editing.
    I will use it with Premiere and After Effects CS5.
    The hardware I am going to buy is listed below:
    - Processor Intel Core i7-2600K
    - Mother Board ASUS SABERTOOTH P67 (or the ASUS P8P67 Deluxe... I didn't decide it yet)
    - 2 Hard Disks WD Caviar Black 1TB SATA III (6Gb/s) 7200RPM [for working media and exports]
    - 1 Hard Disk Seagate Barracuda 500GB SATA II (3Gb/s) 7200RPM [for OS and Programs]
    - SDRAM DDR3 Corsair 8GB (2 x 4GB) 1866MHz (PC3 15000)
    - Video card ATI Radeon 5850 1024MB (later I'll buy another and CrossFire them)
    - Pioneer Internal Blu-ray Disc/DVD/CD Writer BDR-206
    I also have a eSata Docking Station and other slower HDDs for Backups and "Old Projects Library".
    So, my question is simple: what is the best way to use my HDDs, to get the best performance on Premiere and After Effects?
    A) OS, Programs, PageFile and Media Cache on the Seagate HDD + Media, Projects, Previews and Exports on the WD HDDs working on RAID0; or
    B) OS, Programs and PageFile on the Seagate HDD + Media and Projects on one WD HDD + Previews, Media Cache and Exports on the second WD HDD?
    Thanks a lot!
    Thiago
    Ps.: My next upgrade will be another 8GB for RAM and another 2 WD Caviar Black HDDs, as soon as I make some money with that machine... xD

    Hey Harm, thanks for the response.
    First of all, I did choose the ATI GPU because of the benchmarks I saw on internet, BUT i didn't know about the CUDA Acceleration Technology. So, I will probably buy a nVidia GTX460, since it is at the same price level, but seems to have a better performance with Premiere and AfterEffects. =)
    But the question is about HDDs, so let's get to it.
    I read in the forum that it doesn't make a big difference to have RAID 0 HDDs or even use the SATA III drives foe video editing, because the system doesn't even use the whole bandwith of the SATA II technology.
    But, in another question, I read that it depends on the type of files you are working with. I have a Canon 550D, so it records in 330MB/min (about 45MB/s) in 1080/24p, using the h.264 codec (in *.mov files). Those are the files I will edit and I want to burn Blu-Ray disks with my movies.
    That said, my doubts are:
    A) Should I invest on SATA III disks for better performance? Will I take any advantage of the 6Gb/s bandwidth, or the only difference will be the 64MB cache?
    B) Is it better to have a faster C: drive?
    I am asking that to get a better use of my investment. If the SATA III disks won't give me any difference on performance, I could get some SATA II disks and then use that money to buy more RAM - or faster RAM, like 2000MHz.
    Thanks again!!!
    Thiago

  • What is the best hard drive cleaner for mac book pro

    I am wanting to clean up my hard drive , any suggestions as to what is the best product for this . I read reviews about ccleaner , which is in the app store but there was some really scary stories ... any suggestions .Thanks

    AppStore software has restrictions on what it can do.
    If you don't like CCleaner for OS X downloaded from their site (not AppStore), then OnyX for OS X at MacUpdate.com has been a long time favorite to clean the caches, log files and what not for privacy and troubleshooting corrupted caches. Followed by a reboot.
    Then a Disk Utility > Erase Free Space with Zero is recommended afterwards to scrub deleted files off the hard drive if that level of privacy cleaning is necessary as deleted files remain on hard drives until overwritten.
    If your having performance problems with your computer then look at this for solutions
    Why is my computer slow?
    If your selling the machine or have to clean it for security reasons
    How do I securely delete data from the machine?

  • What's the maximum hard disk size for the MBP?

    Sorry the title might sound like a dumb question, but I was wondering if my MBP Core Duo, is future proof regarding the internal hard disk. Will it recognise any capacity, or stuck at a certain level?
    Also what are the largest Apple supported internal drives currently available? Any recommendations?

    That's kind of a gray area, but I think you may be right. Here are the conditions under which Apple can refuse service:
    This warranty does not apply: (a) to damage caused by use with non-Apple products; (b) to damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage caused by operating the product outside the permitted or intended uses described by Apple; (d) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Apple or an Apple Authorized Service Provider; (e) to a product or part that has been modified to significantly alter functionality or capability without the written permission of Apple; (f) to consumable parts, such as batteries, unless damage has occurred due to a defect in materials or workmanship; or (g) if any Apple serial number has been removed or defaced.
    So if something breaks that's unrelated to your HDD upgrade, I think Apple still has to service it as long as you didn't break it while performing the ugprade. At least that's my interpretation.

  • What is the best hard drive configuration for disk/media cache?

    I just installed a 480 GB PCI SSD for my boot drive. I also have a 240 GB SSD and a 1TB 7200 rpm hd. Can anyone suggest on which drives to place my source files, aep files, media and disk cache and output for the best read/write speed? Thanks for any advice. Same question for Premiere Pro too, if you know!
    I'm using a Mac Pro dual proc, 12 core, 40 GB.

    Hi YoshBear,
    Welcome to Adobe forums,
    We recommend you to go through following link as it provides more information about setting up hardware for Premiere pro and After effects :
    http://forums.adobe.com/thread/878520
    http://helpx.adobe.com/after-effects/using/improve-performance.html
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/produ ction/cs6/pdfs/adobe-hardware-performance-whitepaper.pdf
    Regards
    Abhishek

  • What is the best hard shell case for a 15 inch mac book pro

    Hi!
    I have a new mac book pro and i want to get a hard shell case to protect it?  Which is the best one....?
    does anyone like the speck hard shell?

    Been using Speck now for about 4 years.  No complaints from me!

  • What's the expected hard disk speed for Mac Mini?

    Hi all, I just bought my first Mac for use in my personal photo studio, a refurbed 2011 Mac Mini i5 2.5ghz. As I was setting up external drives and putting the mini through its paces, I ran a disk benchmark (BlackMagic Disk Speed Test) and got some pretty poor scores.
    My mini's internal drive hits roughly 40MB/s for both sequential read and sequential write. Am I correct in thinking that this is poor performance even for a 5400 rpm drive? The drive is mostly full; there are 50GB free. Would you recommend that I address this with Applecare?
    Here are two other Minis (same 5400 rpm drive) hitting much higher marks:
    http://www.youtube.com/watch?v=P2KOAUAqYiw#t=1m41s
    http://www.youtube.com/watch?v=uPksGswN8Uk#t=0m18s

    Thanks for the response, Allan. I was preparing to move most of the data to an external RAID setup when I ran that benchmark. It made me think twice about spending several hours setting up the system if in the end the system drive needs replacement.
    I'll move some data and see if the speed improves.
    ps - One of the torx screws inside the mini case is misaligned. Noticed this when installing new ram. I guess that's making me a bit paranoid that the refurb process didn't go smoothly ;-)

  • What is the Best Hard Drive Camcorder for/compatible with FCP?

    Hi,
    Just bought a JVC GZ-HD7...feel very trouble...unlike those MiniDV Cassette base Cam,Just plug in FireWire and FCP will read!!!To use the GZ-HD7 in FCP might use a lot of steps to convert before inport the source.
    And now i'ld like to invest Hard Drive Camcorder for my FCP editing base,Is it a Good Media Format?
    If yes,Which Prosumer or Semi-Pro Camcorder will you recommend?Really need your helps,maybe you are the one who are currently using it and feel happy with over all?!
    Hope to get some suggestion from you guys!!
    Thanks!!

    http://panasonic.co.jp/pavc/global/videocamera/hd/global/products/hdc-sd9/
    Thanks for tip David. I work at a middle school, we shoot a lot of district functions with three cameras then use the multiclip function of FCP. If I bought three of these cameras do you think they will work well in that environment? here is our workflow:
    1. Sync cameras with a clapper at the start of show.
    2. Import into FCP
    3. Mark inpoint at the sound of the clapper
    4. Create the multiclip sequence and edit
    We have done 50 or so shows like this with 14 year olds as the editors and the results are very nice. I would like to move to the hard drive based camera. Being in education we are on a tight budget. Think three of these camerass would work in this environment?
    Thanks so much for your expert advice.

  • What is the best hard drive upgrade for my MacBook Pro

    I have a 320GB 13" MacBook Pro 2.3 GHZ i5 with 8GB ram; 2011 Model.  I want to upgrade my hard drive to a 750GB or 1TB.  Does anyone have a suggestion on where to buy and or which model I should get.

    Try http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
    Allan

  • What are the best practices to replace a disk in 6140 ?

    What are the best practices to replace a disk in 6140?
    Regards

    The best way is to follow CAM Service Advisor instructions.

  • What's the best Hard Drive for TM? USB or FIrewire?

    What's the best Hard Drive for TM? USB 2.0 or FIrewire 400 or 800?
    Any recommendations would be great. Need about 1TB.

    Michael Conniff wrote:
    The most recent is 1TB, and cost about the same as the previous one which was 500GB. The first d2 was only a little cheaper and was 60GB!
    Same experience here! They keep the price about the same but you get double the storage, so the price of storage has been going down big time! But now I find myself ******* after Drobo Hey, that editor whacked me for "l u s t i n g" that isn't foul language is it?
    -mj
    Message was edited by: macjack

  • What is the best way to replace the Inline Views for better performance ?

    Hi,
    I am using Oracle 9i ,
    What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
    Please suggest.
    Raj

    WITH plus /*+ MATERIALIZE */ hint can do good to you.
    see below the test case.
    SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
    2 /
    Table created.
    SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
    2 /
    5 rows created.
    SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
    2 /
    Index created.
    SQL> commit;
    Commit complete.
    SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
    PL/SQL procedure successfully completed.
    Now this a normal inline view
    SQL> select a.id, b.id, a.name, b.name
    2 from (select id, name from hx_my_tbl where id = 1) a,
    3 (select id, name from hx_my_tbl where id = 1) b
    4 where a.id = b.id
    5 and a.name <> b.name
    6 /
    Execution Plan
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
    1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
    2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    Now i use the with with the materialize hint
    SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
    2 select a.id, b.id, a.name, b.name
    3 from my_view a,
    4 my_view b
    5 where a.id = b.id
    6 and a.name <> b.name
    7 /
    Execution Plan
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
    1 0 TEMP TABLE TRANSFORMATION
    2 1 LOAD AS SELECT
    3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
    4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
    5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
    6 5 VIEW (Cost=2 Card=2 Bytes=46)
    7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
    8 5 VIEW (Cost=2 Card=2 Bytes=46)
    9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
    here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
    Thanks,
    Karthick.

  • What's the best hard drive for my 2008  24" I Mac

    Hello I have a question about I Mac .
    What's the best hard drive for my 2008  24" I Mac Intel ?
    I use to have a WD3200AAJS but it's dead now , and I would like to upgrade to  a good one does any body know what I can get ?

    http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-satellite-_-g-_-us-_-ipad_hard_drive-_-p
    http://wd.com/whatsonyourdrive/?utm_campaign=Q2_2012_MBL_UK&utm_medium=Online_Se arch&utm_source=&utm_content=&gclid=CNa9n-_alrcCFUkw4Aod7nkAwg

Maybe you are looking for

  • File Renaming

    I like to add borders to my pictures and I am trying to automate the applying and saving process with actions. I figured out the applying process but saving and renaming is a problem. The borders I use are pre made from a blank file and saved as a ps

  • How do I save a document as a PDF file instead of an HTML?

    I just installed Acrobat XI on my Windows 7 laptop. When I save a file as a PDF, it saves it as an HTML PDF, and will only open in the web browser. I would prefer to simply save it as a PDF file.

  • Can't Save Bookmark Changes

    Acrobat Pro X will not save any of the changes/rename I make to the bookmark titles.  I have to choose save-as and rename the PDF file for it to save the changes. I was able to get it fixed in Acrobat 9 on another user's computer by uninstalling and

  • Please help.... for hhk file

    guys i got an issue in robohelp 10 i had a project of toc in two languages, except the translation content rest all the links are perfectly equal to each other so once i created the toc in 1st language, for the 2nd i just replaced the source html fil

  • How to prepare for ABAP certification?

    Hi,     I'm currently pursuing my ABAP certification. I've completed the training course and I've started to prepare for the certification. I've heard from a lot of people that the certification exam is really tricky and difficult to get through. A l