What is the best practice to export schema from HTMLDB 2.0 to Bundle APEX

Hello,
1. I want to transfer data ( with trigger, sequence, procedures and functions ) from schema in HTMLDB 2.0 to APEX (with internal www server).
2. Application export and import is good. I want to import data from this apps schema to Oracle XE in methodology export and import without creation by SQL scripts all objects (I need to achive this same sequence and other objects).
3. Generaly, how to transfer apps and data from HTMLDB 2.0 with EE8MSWIN1250 to APEX 2.0 with DB XE AL32UTF8
(all transfers between DB with the same NLS_CHARACTERSET are succesful without any problems)
4. What I must to change with user rights and image properties in apps in new APEX
2.1.0.00.39
5. I the new verssion of the bundle APEX (with internal www server)
Best regards, Remi

Aaron:
Check this site: Bonsai’s HDV to DVD page.
Hope it helps !
Alberto

Similar Messages

What's the best practice to upgrade 3GS from 3.1.2 to 4.2.1

I was reading the thread which was very helpful:
http://discussions.apple.com/thread.jspa?threadID=2665989
But there is a slight difference here with my situation:
-- I'm planning to upgrade from 3.1.2 to 4.2.1, yet in that thread the guy was trying to upgrade from 4.1
And recently a friend told me he had an error 1013 during upgrade. Google also mentioned another error code, 1015, related to upgrading to 4.2.1
1. Does anyone know what exactly caused Error 1013 and 1015?
2. what is the best practice to upgrade from 3.1.2? Upgrading to 4.1 first and then upgrade from 4.1 to 4.2.1? Will that eliminate the occurring of these itunes errors?
*(Yes, I know apple has officially terminated supporting upgrading an iphone firmware to anything below 4.3. But can we just discuss my questions hypothetically?)*
Thanks people.

paulcb wrote:
Errors 1013 and 1015...
http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=iphoneError+1013+and1015
http://support.apple.com/kb/ts1275
Thanks a lot, paulcb.

What are the best setting to export video from after effects to get the best video quality ?

Hi
I am editing a raw time lapse in after effects and also some short video clips I would like to export them from after effects and upload them online afterwards but i get a bit lost in exporting settings and formats and mbps..
What are the best settings to export a video and get best quality(high) in full hd 1080 ? in 4k ? and what would be the best setting to export animations/logo/intro and get best quality ?
Thank you very much.

Thanks for reply !
I used until now quicktime in H264 codec was that OK ?
two more questions :
what are the export settings for 4k files for web/you tube ?
to play on my PC using windows media player or Quicktime player and getting the best quality ?
Thanks in advance.

What is the best practice to migrate code from dev to prod

I have few questions related OWB version control/migration.
1. What is the best way to Version the design repository
We want to keep a separate copy of production and test version all the time.
Do we have to create design repository in each environment ?
2. Is it possible to have multiple copies of the same mapping ? If yes how this is done in OWB
3. How to migrate the code to different environments
2.1 Is there a way to provide DBA with script for deploying PL/SQL mapping without using OWB ?
2.2 How important is the setting before actual code in the XML file is required to execute the mapping.
2.3 We are planning to create tables , materialized view etc., outside OWB will this cause any problems ?
Note : Our DBA prepare compiling the code through SQLPLUS
3. Which user ( target owner or runtime access ) should be used to execute the mapping through sqlplus.
We are looking for a solution were we do not have to use OWB tools for version control , migration and deployment. Currently we are using PVCS for version control and migration.
we are using OWB 9.2 , Oracle 9.2.
Any suggestion/ comments are appreciated.
Thanks,
Sekar,K

Some answers below:
1. Yes, you should use snapshots (right click on t he object and select create snapshot or on the project menu, select Change Manager for a centralized snapshot management).
2. See above.
3. Usually you will export the (test/development) design repository to an mdl file, and import it into the other (production) design directory. Then you will deploy the code from the other design directory into the production target (runtime).
2.1 From 9.2 on, you will have to deploy to file and then use OWB scripting (OMBPlus) to deploy the generated file outside of the deployment manager.
2.2 Not sure what is asked in this question - can you rephrase?
2.3 No, but the creation and use of thes will not be managed and audited by OWB (Runtime Audit Browser)
3.(bis) The target owner.
Regards:
Igor

What is the best practice to migrate files from one profile to another?

I am increasing having to move from one created local profile machine to an active directory joined mobile account. What is the best way to migrate the files from one profile to another?

Some answers below:
1. Yes, you should use snapshots (right click on t he object and select create snapshot or on the project menu, select Change Manager for a centralized snapshot management).
2. See above.
3. Usually you will export the (test/development) design repository to an mdl file, and import it into the other (production) design directory. Then you will deploy the code from the other design directory into the production target (runtime).
2.1 From 9.2 on, you will have to deploy to file and then use OWB scripting (OMBPlus) to deploy the generated file outside of the deployment manager.
2.2 Not sure what is asked in this question - can you rephrase?
2.3 No, but the creation and use of thes will not be managed and audited by OWB (Runtime Audit Browser)
3.(bis) The target owner.
Regards:
Igor

What is the best way of exporting artboards from Illustrator for use in InDesign?

Hi,
I have an artboard in Illustrator CS6 which contains some text with a scribble effect applied to it. I would like to use this text in an InDesign CS6 document. I am wondering what the best way of exporting/importing this artboard would be so that I get the best quality.
Thanks,
Nick

Save as an AI file with PDF compatibility enabled and the Document Raster Effects set to "High"; then use File>Place in ID.

What is the best way to export HDV from Final Cut Pro 5.1.2 ???

Should I even use the compressor route? i want my to export hdv footage to dvd studio pro and burn to dvd. i want to understand the best way so it looks like the original mini hdv tape.
can anyone help that has experience in this area?

you can use compressor to encode your HDV footage.
believe it or not, you can obtain stunning results when you encode and output to DVD.
i guess my only questions to you are:
will you want to output a "HD DVD" or a SD DVD?
how long is your footage?
in what mode did you shoot (720p or 1080i)?
what type of footage, overall, would you say you have (fast action paced, slow action, interviews)?
to be honest with you aaron, there isn't really a setting that is a "set all". compression is both an art and science. additionally, quality of your encoded file can be very subjective!
let me know and we can get ya started on the right track
Mikey M.

What's the best way to export Photos from Aperture to iPhoto

Hi,
so heres the deal:
My father has a really old/slow mac and whenever he tries to export more than like 3 photos from aperture the computer freezes.
So to get his photos i thaught i could just copy his aperture library onto my external hd.
but will i be able to import the photos into iphoto? and i'd like to not have the originals but the edited photos.
or will i have to export the photos from aperture (e.g. with my brothers, faster mac...)

Paul, do your father and you have compatible versions of iPhoto and Aperture? Aperture 3.3 and iPhoto 9.3 or later?
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
With the new, unified library architecture you can simply open an Aperture library in iPhoto - no need to import anything.
If the Aperture library is not compatible, from an older Aperture version, you can try to export the versions on your brother's mac (file > Export > Versions).
My father has a really old/slow mac and whenever he tries to export more than like 3 photos from aperture the computer freezes.
That is not normal, however old the mac is.
Either his hard drive is too full and needs freeing disk space, or he has imported corrupted images, or his Aperture library needs repairing or rebuilding. He should try to repair his library, if he has used "force quit" on Aperture. See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Regards
Léonie

What are the best practices for the RCU's schemas

Hi,
I was wondering if there is some best practices about the RCU's schemas created with BIEE.
I already have discoverer (and application server), so I have a metadata repository for the Application Server. I will upgrade Discoverer 10g to 11, so I will create new schema with RCU in my metada repository (MR) of the Application Server. I'm wondering if I can put the BIEE's RCU schemas in the same database.
Basically,
1. is there a standard for the PREFIX ?
2. If I have multiple components of Fusion in the same Database, I will have multiples PREFIX_MDS schema ? Can they have the same PREFIX ? Or They all need to have a different prefix ?
For exemple: DISCO_MDS and BIEE_MDS or I can have DEV_MDS and this schema is valid for both Discoverer and BIEE.
Thank you !

What are the best practices for exception handling in n-tier applications?
The application is a fat client based on MVVM pattern with
.NET framework.
That would be to catch all exceptions at a single point in the n-tier solution, log it and create user friendly messages displayed to the user.

What are the best practices for generating an EPS logo from InDesign?

Our costomer is running into technical issues with the logo we sent them, which was exported from Indesign. Images were not embedded and fonts missing. I was able to embed the images and fonts. However, we DO NOT want them to be able to make any text changes. So after exporting an eps, I opened the file in Adobe Illustrator and made all the text outlines. I hope this works. But I just wanted to post the question on what are the best practices for doing this?
The client needs the logo with transparent background, images emebdded and type in outlines. Also, they need some space around the text. When I exported the eps, the file is right up on the edge of the type.

It sounds like you are pretty far from "best practice" with regard to logo design and delivery.
These days, the very use of the EPS format should be considered bad practice, and some other terms in your post, (i.e., 'images,' 'missing fonts'), make it sound like there is not a seasoned logo designer involved.
That said, you probably already got the advice you need to get out of the immediate jam. However, without proper logo design, you and the client will soon be facing other problems. You should be delivering a 100% vector graphic in single-color (black) and corporate-color(s) versions, with no live font data, that has been test-scaled to very small and very large sizes; ensuring it will work at postage-stamp size and on the side of a truck or building, with specific spot color(s) and proportions that will enable it to be offset printed, embroidered and screen-printed on apparel, and cut into signage materials and decals.

What is the best practice for this?

Hi,
I have a huge package, let's say including 100 procedures.
These procedures(with package name qualifier) are called all around the application. Now i want to divide it to 5 packages each one including 20 procedures.
What is the best practice to do this with minimum changes in the application?

First step before doing anything with OD is to make certain that local DNS services are correct. To verify that, launch Terminal.app from Applications > Utilities on the test server, and issue the following harmless, diagnostic command:
sudo changeip -checkhostname
You'll need to enter your administrative password for the sudo to be accepted.
If the output from that command reports no changes are required, then an export from the original OD and an import into the test system would be typical for testing, if you trust what's in the original OD.

What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

I don't use it but it does say this in the help section...

What are the best practices to migrate VPN users for Inter forest mgration?

What are the best practices to migrate VPN users for Inter forest mgration?

It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
Quest (QMM) has a VPN migration solution/tool.
ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

What are the best practices to replace a disk in 6140 ?

What are the best practices to replace a disk in 6140?
Regards

The best way is to follow CAM Service Advisor instructions.

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What is the best practice to export schema from HTMLDB 2.0 to Bundle APEX

Similar Messages

Maybe you are looking for