What is the best practices to apply two factor authentication on on-premise Exchange 2013 Environment ?

Hi, Everyone
i want to know what is the requirements to apply two factor authentication in Exchange 2013, Through Mobile or SMS.
what is the third party solutions of Microsoft solutions

Hi,
If we can deploy Active Directory Federation Services (AD FS) 2.0, it means that Outlook Web App and EAC in Exchange 2013 SP1 can support multifactor authentication methods, such as certificate-based authentication, authentication or security tokens, and
fingerprint authentication.
Additional, we can use TMG or Microsoft UAG to deploy MFA, please refer to:
https://social.technet.microsoft.com/Forums/exchange/en-US/f355ffbd-7d03-45d8-b4b1-987b2db5eadf/is-there-a-way-to-do-two-factor-authentication-with-outlook-web-app-2010?forum=exchangesvrgenerallegacy
Best Regards,
Allen Wang

Similar Messages

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

My final data table contains a two key columns unique key constraint. I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
(not unique) in the daily capture table). I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). Currently, what I do is to select * into a #temp table from the join
of daily capture and final data tables on these two key columns. Then I delete the rows in the daily capture table which match the #temp table. Then I insert the remaining rows from daily capture into the final data table.
Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table? How would this look?
What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
Rich P

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key. You need to fix this error. What ETL tool do you use?
>> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
MERGE statement; Google it. And do not use temp tables.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

What is the best practice to display info of completed task in process flow

Hi all,
I'm starting to study BPM modeling with CE7.1 EHP1. Thanks to the tutorial and example on SDN site and I can easily build my own process in NWDS and deploy to server, start it, finish it.
I like the new runtime which can show a BPMN diagram to the processors. However, I can't find a way to let the follow up processor to review the task result completed in previous step. I'm more familiar with Guided Procedure, and know there is "Display Callable Object" which can used to show some info of a completed task when the processor/owner/admin/overseer click on a completed task. Where is the feature in BPM ? What is the best practice to show such task information in BPM environment.
For example, A multiple level approval process, the higher level approver need to know the comment written by the previous approver. Can he read this information from process flow ?
I think it is very important feature for a BPM platform. In Guided Procedure, such requirement can be done with Display Callable Object + View Permission, and you just need some coding for the UI. If BPM is superior to GP, I think there must be a way to achieve this, I just do not know how ?
Can anyone shed me some light on it ?

Oliver,
Thanks for your quick reply.
Yes, Notes and Attachment CAN BE USED for the purpose. But I'm still looking for a more elegant solution.
With the solution of using Notes/Attachment, the processor need to give input at two places : the task UI and Note/Attach , with similar or same data. It is really annoying.
Is there any SAP BPM real-world deployment ? None of customer has the requirement ?

What is the Best practice for ceramic industry?

Dear All;
i would like to ask two questions:
1- which manufacturing category (process or discrete) fit ceramic industry?
2- what is the Best practice for ceramic industry?
please note from the below link
[https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000409682008E ]
i recognized that ceramic industry is under category called building material which in turn under mill product and mining
but there is no best practices for building material or even mill product and only fabricated meta and mining best practices is available.
thanks in advance

Hi,
I understand that you refer to production of ceramic tiles. The solution for PP was process, with these setps: raw materials preparation (glazes and frits), dry pressing (I don't know extrusion process), glazing, firing (single fire), sorting and packing. In Spain, usually are All-in-one solutions (R/3 o ECC solutions). Perhaps the production of decors have fast firing and additional processes.
In my opinion, the curiosity is in batch determination in SD, that you must determine in sales order because builders want that the order will be homogeneus in tone and caliber, and he/she can split the order in diferents deliveries. You must think that batch is tone (diferents colours in firing and so on) and in caliber.
I hope this helps you
Regards,
Eduardo

What is the best practice concerning View Objects and List of values

Hi,
Let's take these two tables :
Market_Descriptions
Id
Name
Desc
Language_Id
Languages
Id
Code
Desc
Now, if I am generating these business components with the help of the wizard, I will be having two entities and two views.
If I am creating a list of value on the field Language_Id in Market_Descriptions table, showing the language code, everything works fine as long as this is drop as a Form but not as a table or read-only form.
What is the best practice for me to include/replace the language_id with the language code, since it is more user-friendly, on a read-only form or a table?
Thanks.

Hi,
Always have LOV on the field which we want show it on UI. Suppose based on below scenario, If you want to display Langaugae Description on UI, have LOV on Desc but not on Language_Id. Even though we can set display attribute in LOV configuration, but it will work only in forms but not in tables. In tables it will show language id instead of description.
Have LOV on Desc and make one more join with location Id in LOV configuration, so as soon as we select desc in LOV, location_id will be populated.
here is the join condition inside LOV
Languages.Desc = ViewAccessor.Desc
Languages.Id - ViewAccessor.Desc
Hope this will help you.
Dileep.

What's the best way to apply a detuned effect to a piano (audio or midi)?

Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
Thanks

Are you looking for a Honky Tonky Piano effect?
you need two istances of the same piano (exs24 Logic patch are great)
use fine detune (pitch) only one of the two piano istances.
G

WhatÃÂ¢ÃÂÃÂs the best practice for this scenario?

Hi,
My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
View.setWhereClause(...);
View.setOrderByClause(...);
View.executeQuery();
This works good when only one user working with the application but faced low performance when more than one user working with the application.
What are the points to increase the performance and what is the best practice for this scenario?
Thanks for your help in advance.

Sung,
I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
what do you think.
Thanks in advance for your comments.

Appl. Hierarchy and Package Hierarchy - what is the Best practice ?

Hi!
We plan to create a Package Hierarchy in our system, but then come to think of the Application Hierachy is built the way we think of building the Package Hierarchy. We planned to build a Main package called fex. HR and below a structure package called HR-PA and below that ordinary packages within that area. But should we rather create our own application hierarchy for this?
Or should we assign the packages to Sap standard application Hierarchy in the HR area ?
What is the Best practice in this area ? Have any tried to create their own hierarchies ?
Regards, Tine

Hi!
You can create your own Application Hierarchy as well .
From ABAP Workbench select Overview->Applic. hierarchy->SAP or Customer
This is what SAP says about this :
The application component hierarchy is a method of splitting up the SAP System from a logical or business point of view. Packages are a method of modularizing the system from a technical point of view. This technical modularization can, but need not, match the logical division of the system. Assignments should be made however between these two views.
Regards, Tine

What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

What are the best practices to connect 30-40 iPads to Wi-Fi in a single room?

I don't use it but it does say this in the help section...

What are the best practices to migrate VPN users for Inter forest mgration?

What are the best practices to migrate VPN users for Inter forest mgration?

It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
Quest (QMM) has a VPN migration solution/tool.
ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

What are the best practices to replace a disk in 6140 ?

What are the best practices to replace a disk in 6140?
Regards

The best way is to follow CAM Service Advisor instructions.

What is the best practice in securing deployed source files

hi guys,
Just yesterday, I developed a simple image cropper using ajax
and flash. After compiling the package, I notice the
package/installer delivers the same exact source files as in
developed to the installed folder.
This doesnt concern me much at first, but coming to think of
it. This question keeps coming out of my head.
"What is the best practice in securing deployed source
files?"
How do we secure application installed source files from
being tampered. Especially, when it comes to tampering of the
source files after it's been installed. E.g. modifying spraydata.js
files for example can be done easily with an editor.

Hi,
You could compute a SHA or MD5 hash of your source files on
first run and save these hashes to EncryptedLocalStore.
On startup, recompute and verify. (This, of course, fails to
address when the main app's swf / swc / html itself is
decompiled)

What is the best practice for full browser video to achieve the highest quality?

I'd like to get your thoughts on the best way to deliver full-browser (scale to the size of the browser window) video. I'm skilled in the creation of the content but learning to make the most out of Flash CS5 and would love to hear what you would suggest.
Most of the tutorials I can find on full browser/scalable video are for earlier versions of Flash; what is the best practice today? Best resolution/format for the video?
If there is an Adobe guide to this I'm happy to eat humble pie if someone can redirect me to it; I'm using CS5 Production Premium.
I like the full screen video effect they have on the "Sounds of pertussis" web-site; this is exactly what I'm trying to create but I'm not sure what is the best way to approach it - any hints/tips you can offer would be great?
Thanks in advance!

Use the little squares over your video to mask the quality. Sounds of Pertussis is not full screen video, but rather full stage. Which is easier to work with since all the controls and other assets stay on screen. You set up your html file to allow full screen. Then bring in your video (netstream or flvPlayback component) and scale that to the full size of your stage (since in this case it's basically the background) . I made a quickie demo here. (The video is from a cheapo SD consumer camera, so pretty poor quality to start.)
In AS3 is would look something like
import flash.display.Loader;
import flash.net.URLRequest;
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.ui.Mouse;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.display.StageDisplayState;
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
// determine current stage size
var sw:int = int(stage.stageWidth);
var sh:int = int(stage.stageHeight);
// load video
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
var vid:Video = new Video(656, 480); // size off video
this.addChildAt(vid, 0);
vid.attachNetStream(ns);
//path to your video_file
ns.play("content/GS.f4v");
var netClient:Object = new Object();
ns.client = netClient;
// add listener for resizing of the stage so we can scale our assets
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.dispatchEvent(new Event(Event.RESIZE));
function resizeHandler(e:Event = null):void
// determine current stage size
 var sw:int = stage.stageWidth;
 var sh:int = stage.stageHeight;
// scale video size depending on stage size
 vid.width = sw;
 vid.height = sh;
// Don't scale video smaller than certain size
 if (vid.height < 480)
 vid.height = 480;
 if (vid.width < 656)
 vid.width = 656;
// choose the smaller scale property (x or y) and match the other to it so the size is proportional;
 (vid.scaleX > vid.scaleY) ? vid.scaleY = vid.scaleX : vid.scaleX = vid.scaleY;
// add event listener for full screen button
fullScreenStage_mc.buttonMode = true;
fullScreenStage_mc.mouseChildren = false;
fullScreenStage_mc.addEventListener(MouseEvent.CLICK, goFullStage, false, 0, true);
function goFullStage(event:MouseEvent):void
 //vid.fullScreenTakeOver = false; // keeps flvPlayer component from becoming full screen if you use it instead
 if (stage.displayState == StageDisplayState.NORMAL)
 stage.displayState=StageDisplayState.FULL_SCREEN;
 else
 stage.displayState=StageDisplayState.NORMAL;

Database Log File becomes very big, What's the best practice to handle it?

The log of my production Database is getting very big, and the harddisk is almost full, I am pretty new to SAP, but familiar with SQL Server, if anybody can give me advice on what's the best practice to handle this issue.
Should I Shrink the Database?
I know increase hard disk is need for long term .
Thanks in advance.

Hi Finke,
Usually the log file fills up and grow huge, due to not having regular transaction log backups. If you database is in FULL recovery mode, every transaction is logged in Transaction file, and it gets cleared when you take a log backup. If it is a production system and if you don't have regular transaction log backups, the problem is just sitting there to explode, when you need a point in time restore. Please check you backup/restore strategy.
Follow these steps to get transactional file back in normal shape:
1.) Take a transactional backup.
2.) shrink log file. ( DBCC shrinkfile('logfilename',10240)
The above command will shrink the file to 10 GB.(recommended size for high transactional systems)
>
Finke Xie wrote:
> Should I Shrink the Database? .
"NEVER SHRINK DATA FILES", shrink only log file
3.) Schedule log backups every 15 minutes.
Thanks
Mush

What is the best practices to apply two factor authentication on on-premise Exchange 2013 Environment ?

Similar Messages

Maybe you are looking for