What is the best program for cleaning MacBook Pro?, What is the best program for cleaning MacBook Pro?
What is the best free program to clean MacBook Pro? One I can set for automatic clean-up
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible. An outstanding source of information is OS X Maintenance - MacAttorney.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Additional suggestions will be found in:
1. Mac Maintenance Quick Assist,
2. Mac OS X speed FAQ,
3. Speeding up Macs,
4. Macintosh OS X Routine Maintenance,
5. Essential Mac Maintenance: Get set up,
6. Essential Mac Maintenance: Rev up your routines,
7. Maintaining OS X,
8. Five Mac maintenance myths,
9. How to Speed up Macs, and
10. Myths of required versus not required maintenance for Mac OS X.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.
Similar Messages
-
I've buy a new Air Book for may self :-) and I want to offer my Macbook pro to my sun. I really want to know what should I do to clean all my information in the my old computer?
Backup your data off the machine to a external drive (not TimeMachine) and disconnect.
Create another Admin account in System Preferences and log into it, delete your Admin Account and reboot.
Optional: Open Disk Utility and Erase Free Space (Zero good enough, 7x for military level, both take time)
This should be good enough to remove just your account and data without the hassle of reinstalling the OS and all new programs again.
However if you need that level, then c boot off the 10.6 disk (or command r boot on Lion) and use Disk Utility there to Zero or 7x erase the OSX drive/partition, quit and reinstall OS X. Much more work that likely is unnecessary in your case.
Good Luck. -
I want to sell my old macbook air, what is the best way to get my files and programs off of it?
I am going to sell my macbook air (2011) as I am replacing it with a macbook pro retina. I want to remove my files and programs from it before I sell it. What is the best way to go about this?
1) Perform a Time Machine or Cloned image backup of your system.
2) Test the Clone tomake sure it works, by booting to it (using the option key).
3) Boot to the Recovery Partition, then perform an erasure, followed by a reinstallation of the OS.
4) Shut off the Mac, after instllation and before the reboot. This will permit the next user to experience a "fresh out of the box" experience.
5) Use the Time Machine or Cloned image to migrate your apps, users & files to your new system, using SETUP ASSISTANT. Do not use Migration Assistant. -
I own a MacBook Pro laptop, an iPhone5 and an iPad mini with an itunes and apple account. I just purchased another iphone5 for my wife. What is the best way to sync and share iTunes music, iCal dates on her phone and my computer and devices? We don't need to sync and share contacts.
Jordans374 wrote:
Both are already synced to a windows laptop?
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
What is the best way to 'clean up" a Mac that has been going for about 2 years. I reset safari frequently but need to be sure stuff I don't want is gone.
I'd gather by your "reset Safari" and "clean up" you mean by sites you rather not have your mom see.
Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find first, but need to reinstall Flash again here
http://www.macupdate.com/app/mac/11076/easyfind
http://get.adobe.com/flashplayer/
OnyX run All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
http://www.titanium.free.fr/
CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
http://www.piriform.com/mac/ccleaner
Every web site knows your apx location.
http://www.whatsmyip.org/more/
To be sure to have a clean machine, a
Restoring OS X - 10.6 "fresh install method"
Restoring OS X - 10.7 - wipe and install
is the only way as you only bring files back to the machine that you know what they are, everything else is removed.
https://discussions.apple.com/message/16276201#16276201 -
my daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks
If you know that you will not be asked to design GUI interfaces, and the C programming course will adhere to command line compilation environments, then get the Xcode command-line developer tools, and skip the extra complication of Xcode until you absolutely need it. Apple has kicked GNU C to the curb and is rightly so, using Clang/LLVM compiler technology.
Sign up for a free Apple Developer account using your Apple ID, and then visit the Mac Dev Center, and towards the bottom of the page, you will see additional downloads. Click on the associated, all down loads link. Know your OS X version beforehand, as the command-line tool releases are tied to general operating system versions, and the most recent Xcode version. That said, there are currently two March 9, 2015 command-line tools for Xcode 6.2 — one for OS X 10.9 Mavericks, and the other for OS X Yosemite. -
What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.
If your needs are limited to those tasks then both Preview and iPhoto will fit the bill They are already on your Mac. There is a free download from Google called Picasa available here:
http://picasa.google.com/
It works much the in same manner as iPhoto. For some really heavy duty work there is GIMP available from SourceForge:
http://www.gimp.org/macintosh/ Also a free download.
Message was edited by: kennethfromtoronto -
Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?
Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet. -
What is the converter for video files, to use in the iMovie? My files are mpeg, wmv, mts, avi, etc. I recently purchased a MacBook Pro - version 10.10.1.
AppGeeker will do the job.
-
I have a macbk pro. I think a usb external drive would be fine for time machine but I'd like a fire wire external drive to store files.
Any recommendations on brand? The last recommendations were dated 2006/7
I have been waiting for a 1TB g-drive. Apparently they are special order. I did not think I needed anything larger than 1 TB to backup the 500GB internal drive.
I thought I'd get something bigger for storage. From what I have read I think its best not to partition the drive for backup and storage.
Also I'd like to have a bootable copy of my internal hard drive is that possible?Don't know about the Best... But I have been using these without any issues...
LaCie quadra D2 for Manual Backup and Clone Backup
LaCie Rikki for USB Time Machine
For Bootable Backups See
SuperDuper http://www.shirt-pocket.com/
CCC http://www.bombich.com/ -
What is the best 3G key for new macbook pro, what is the best 3G key for new macbook pro
I ve just buy a new macbook pro 13" and the Alcatel Key (3g) to connect web but it doesn't working.
My supplier told me is because of thunderbolt system.
the web is essential for my business
What can i do ? Which key i need ?
Yours sincerely
FlorentFirst the reason sounds like "tech guy doesn't know"
If your in Europe then I use Vodafone, and have been happy. I also tether my Android phone, depending whc has better reception (though the Android is free with easytether) -
I want to run Quicken through Windows on my macbook pro, whats the best way to do this?
I want to run Quicken 2012 through Windows on my macbook pro, whats the best way to do this?
I have been looking at Parallels or VMware in order to use Windows but then I will also need to get a Windows license. Just looking for the most inexpensive way possible as this will probably be the only Windows app I run.
Also looking at this CrossOver software which says you dont need Windows license. Anyone used this before? had success?CrossOver's website has a list of software it has certified as working or working with known issues - Quicken 2012 has a bronze rating meaning it runs but with enough issues that it isn't recommended. In other words, "Run away!"
Get a copy of Windows 7 OEM from Amazon or New Egg and give it a try with VirtualBox (an open source virtualization program). If VirtualBox doesn't cut it you can always buy VMWare or Parallels. -
In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?
Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I have recently purchased a new macbook pro, I had a macbook 13" notebook from 2008 and I trasnferred all of my files using the migration assistant. It said the transfer was completed and everything looked fine. but when I try to open my CS4 photoshop, illustrator, indesign or my microsoft for mac programs they crash. did the files not transfer correctly? do I have to reinstall them? do I need to wipe my mac and start again to clean out all of the transferred files?
If you still have your old MacBook, You can put the software installers in and image the discs using isk Utility and then copy them to your new MacBook Pro via a flash drive and install them from the disc images.
Another option is that you can connect it to your new mac in target Disk mode. Then you can use the DVD drive that is in the MacBook to install the software. To do this you would need a firewire cable plugged into your old MacBook and connect that to a Firewire to Thunderbolt adaptor that is connected to your new MacBook Pro.
Create a disk Image: https://support.apple.com/kb/ph5841
How to use Target Disk Mode:https://support.apple.com/kb/ht1661 -
MacBook Pro vs MacBook air, what is best for my life
Hello,
I'm looking at a MacBook air/MacBook Pro. I have no specific one in mind. I don't know a whole lot about MacBooks aside from the fact that they are a bit pricy but they can get the job done(I think), but can a refurbished MacBook under $850?
The only requirements for the MacBook I can think of right now are
• enough memory space for decent photo editing software, decent programming software, text editors, one or two utility applications and whatever software you need for learning how to make iPhone apps
• the ability to run multiple windows at once(example: photoshop in one window, the Mac store in another, a text editor in another, and two or three web pages open; this is at max).
• one that will last at least 5-6 hours per full charge(looking for around 7-8, but 5 hours is fine).
• has the ability to run a better firewall than a windows computer from 2004 running an old operation system.
That's all I can think of at the moment. So could someone tell me what amount of memory(at minimum) and how much ram are needed(at minimum) for the MacBook to serve my purpose? Also what model would that be?Did I post this in the wrong section?
-
I must have gotten a corrupted sector on my disk drive I place my Adobe Photoshop Elements 6 CD in the drive and it asked to install or repair or uninstall. I clicked repair and after a minute it asked for disk 1. I could not find a disk one and my case only has space for one disk. What should I do?
Jim Hamilton.PSE6 is a very old program (more than 6 years old) so what exactly are you trying to do? Have you got PSE6 already on your machine? If so, to uninstall it, all you need to do is to go to the Windows Control Panel and uninstall it under Add/Remove programs icon.
If you are trying to install it again on top of what is already installed then the best way is to uninstall it from the machine before installing again after rebooting. Also, if the disk happens to be damaged then try copying the contents from the disk to a temporary folder on your machine and then try installing from that temporary folder by clicking on the setup.exe file.
Hope this helps.
Maybe you are looking for
-
Can I use SetFld during GenPrint for banner page fields?
I have a banner page form that has multiple variable fields on it to display information specific to the batch it's being included with (for out post-composition handling area). I currently set those fields' values by assigning variables of the same
-
Problem in OWB map for source change capture
The problem is as follows:- Our OWB map between two different databases, captures change in data at source and populates them in target. It is a one to one map. The map is failing to process some rows from source database though it gives no:of errors
-
EUL is inacessible in Oracle Portal
Hi, I experienced the same problem like Dan. We're using AS 9.0.4, and the Discoverer Administrator is 9.0.2.53.12. When I try to connect a portlet with EUL 5.0.2.0.0.0, the system return this message: - An error occurred trying to open the specified
-
Groupwise 2014: How do I change the FID of a user
Hello! In ConsoleOne you can easily change a users FID, but is it possible to do that in the new Administration Console in Groupwise 2014? regards Daniel
-
Failed to export error message
I've been trying to convert a pdf to an excel document. I have received the "failed to export" message multiple times through Adobe Reader and also directly to the website. What is going wrong? My file is 29 mb scanned.