What is the best program to do this?

Hola
I'm trying to put some music into a website and I found this
http://www.flashmusicstudio.com/
--sorry if I don't put it in a link--
...I think it's awesome, but it doesn't work or I cannot make it work.
If I put the finish file in the webpage that I want it to be, it doesn't show it, and if I click into, it will take me to their website.
I only have the trial version, it's not that expensive, but I just want to make sure that I'm going to get the best one and the easy one to work with.
If you know any one that you have use and it work, I'll buy that one.
Thanks

Hola
Here is a link to the page where I need to "fix" how the music player looks.
http://oleproductions.com/pages/music.html
Look how bad they look...I need help please.
Can at least, change the background color of the player?
It has a white border around it...it looks very bad....
...I think that I'm going to cry...:(
Thanks

Similar Messages

  • What's the best way for reading this binary file?

    I've written a program that acquires data from a DAQmx card and writes it on a binary file (attached file and picture). The data that I'm acquiring comes from 8 channels, at 2.5MS/s for, at least, 5 seconds. What's the best way of reading this binary file, knowing that:
    -I'll need it also on graphics (only after acquiring)
    -I also need to see these values and use them later in Matlab.
    I've tried the "Array to Spreadsheet String", but LabView goes out of memory (even if I don't use all of the 8 channels, but only 1).
    LabView 8.6
    Solved!
    Go to Solution.
    Attachments:
    AcquireWrite02.vi ‏15 KB
    myvi.jpg ‏55 KB

    But my real problem, at least now, is how can I divide the information to get not only one graphic but eight?
    I can read the file, but I get this (with only two channels):
    So what I tried was, using a for loop, saving 250 elements in different arrays and then writing it to the .txt file. But it doesn't come right... I used 250 because that's what I got from the graphic: at each 250 points it plots the other channel.
    Am I missing something here? How should I treat the information coming from the binary file, if not the way I'm doing?
    (attached are the .vi files I'm using to save in the .txt format)
    (EDITED. I just saw that I was dividing my graph's data in 4 just before plotting it... so It isn't 250 but 1000 elements for each channel... Still, the problem has not been solved)
    Message Edited by Danigno on 11-17-2008 08:47 AM
    Attachments:
    mygraph.jpg ‏280 KB
    Read Binary File and Save as txt - 2 channels - with SetFilePosition.vi ‏14 KB
    Read Binary File and Save as txt - with SetFilePosition_b_save2files_with_array.vi ‏14 KB

  • What's the best program for making a header containing rollover navigation links?

    I have all CS4 programs and I'm looking to make a header that contains an interactive rollover nav bar. I want the bar to be located within the header. What is the best program for creating the header and rollover buttons. I'm aware i could manipulate the images in other programs, but placement and rollover button creation is what I'm looking for. Thanks. I'm thinking maybe flash or fireworks?

    Spry can do this for you.  See some samples here:
    http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html
    Or there are commercially available menu systems from the likes of companies like Project Seven, whom I would personally recommend:
    http://www.projectseven.com/

  • What IS the best program to use to create an animation, that needs to be viewed in Powerpoint?

    What IS the best program to use to create an animation, that needs to be viewed in powerpoint?  Essentially i want to output a Movie File, so i'm guessing that Edge Animate is out of the question and it's not photoshop, more likely Flash?

    So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
    For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
    For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
    For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

  • What is the best program to use to create an interactive pdf?

    what is the best program to use to create an interactive pdf?

    So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
    For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
    For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
    For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

  • What is the best program to Rip DVD with 5.1 audio for Mac Book

    I just purchased a Macbook Pro and want to rip DVD's. I want to retain the 5.1 audio tracks. What is the best program for this? Thanks in advance for your suggestions

    Sorry, but if you're referring to commercial and hence copy-protected video DVDs, breaking the copy protection, which would be necessary to copy the videos from the DVD and convert them, is illegal in the US (and other countries), so we're not allowed to discuss it here.   Some DVDs and Blu-Ray movies come with a "digital copy" that allows you to download a copy of the movie for use on computers. You might see if any of the DVDs you have come with such a feature.
    If these are home movies that you or someone has burned to DVD and hence are not copy-protected, Handbrake (freeware) is one of the more popular converters. I'm not sure how it handles 5.1 audio, though, if it will at all.
    Regards.

  • What is the best program to use for making high quality gifs?

    Right now I'm using gifbrewery to make gifs from youtube videos. I was just wondering, in your opinion, what's the best program or way to make the best quality gif possible? Thanks so much!

    This is the Flash Player forum.  You would have a much better chance to get a reply if you posted in the Creative Suites forum, and explain what kind of app you want to build.

  • What is the best program or way to check an image on monitor screen (contrast/color etc)

    Hi,
    In ACR I adjust the image so that it looks OK for me.
    But there are a little differences in ACR and PS viewing the image (color, contrast etc).
    In programs like windows foto-viewer there is an other difference (relative to ACR and PS) >> images have more contrast and darker  than viewing in PS.
    An other program Irfanview shows the image with less color (saturisation).
    I have made a test print (in a photo centre), that image results in something between Irfanview and PS.
    Question:
    What is the best program or way to adjust the color / contrast etc so that I get an photo-image (on paper) that is the same as what I see on mij monitor screen.

    THANKS! STATION_TWO for the "over-correct-answer" you give................
    If I'm honest, the answer of Richard was for me enough to realize where I made a "wrong inference" in understanding color management.
    He is for me the best teacher in this case, I've learned something from him because he's talking on my level.
    By the way: the english language is not my native language... so my questions should have to be read with understanding of grammatical expressions from other languages >> ("The color management is know by me…").
    Again: Richard, in this case, read my question properly and has helped me on my way.

  • My old computer is dying and I want to transfer my account to my new computer.  I will not be using the old computer at all.  What is the best way do do this?

    I want to stop using my old computer completely and transfer my itunes account to my new computer.  What is the best way to do this?

    A simple search

  • I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

    I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

    @Barbara – What purpose is that PDF for? Print? Web?
    If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
    A final resort to bring down file size is:
    1. Print to PostScript
    2. Distill to PDF
    That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
    I will place the PDF in InDesign, print to PostScript, distill to PDF.
    Uwe

  • What is the best time to validate this?

    I'm creating a standard form which asks the user for personal data (name, age, address, and so on...).
    At the end of this form the user must enter a User Name for his/her account.
    Since validating the user name requires the server to connect to the database and check wheter that name already exists or not, I'd like to do this verification only when all the other fields in the form are valid. This will reduce accesses to the DB.
    Think about connecting to the DB even when the user fails entering a valid age or other data. It seems pretty inefficient.
    What is the best way to achieve this check?
    I was thinking to create a backing bean which includes all the fields in the form, and which validates the user name field only if every single other field is valid... but I guess that's not how it should be done.
    Any idea? Please help.
    Thank you!

    That's what I do...
    The problem is: I want the other fields to be validated by their validators (and that what happens). But I want the user name to be validated only if all the other fields are valid (i.e. previously validated and accepted), otherwise no validation occours on the user name fields (except for the "needed" one)
    Is that possible?
    I'm doing it with a big Backing Bean which embodies the whole form and checks whether the other fileds are valid or not before validating the User Name.

  • HT1451 I need to move my library from my old computer to my new laptop. What's the best way to do this?

    I need to move my library from my old computer to my new laptop (Windows 8). What's the best way to do this?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • I want to upgrade my Imac from tiger 10.4.11 to Mac OS 10.6 Snow Leopard. What is the best way to do this.

    I have just purchased an iphone 4 and it needs me to have the latest itunes on my computer.  I have not upgraded by computer for some time and thought this is probably the time to do it. My computer is an imac intel with Tiger 10.4.11. I want to upgrade my Imac from tiger 10.4.11 to Mac OS 10.6 Snow Leopard or higher.  What is the best way to do this?  Appreciate any help as I am out of practice. I used to be an old hand at this, but things have moved on since I didn't upgrade or use my computer as much!

    Catherina wrote:
    ...  What is the best way to do this?
    The best way, really the only way, is to purchase Snow Leopard.
    Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Elsewhere: call the phone number in the Apple Online Store.
    Apple's price is $19.99, £14.00, €18.
    Snow Leopard is not available to download from any legitimate source.
    Once you install Snow Leopard, upgrade iTunes to version 10.7 or the latest, iTunes 11.
    iTunes 10.6.3 is the last version of iTunes to support Mac computers with Mac OS X 10.5.8 with either Intel or PowerPC processors, but since you have an Intel iMac, the best solution is to purchase Snow Leopard. Leopard is no longer available from Apple and prices from aftermarket vendors can be unreasonably high.

  • Urchased a new desktop pc and I want to move itunes and all files including IPAD apps to my new computer and delete off my old one.  What is the best way to do this?

    I just purchased a new desktop PC and want to move Itunes and all my Ipad Apps to new computer, and delete off my old computer.  What is the best way to do this?

    Hi,
    See Here for Transferring your iTunes Library
    http://support.apple.com/kb/HT4527
    Make sure Everything is working to your satisfaction Before Deleting anything from your old computer...
    Cheers,

  • Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

    Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

    Once the user has entered the URL they want to add to the form. You can use the loadXML function to implement some special text in a label...
    var linkValue = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><exData contentType=\"text/html\" xmlns=\"http://www.xfa.org/schema/xfa-template/2.8/\"><body xmlns=\"http://www.w3.org/1999/xhtml\" xmlns:xfa=\"http://www.xfa.org/schema/xfa-data/1.0/\" xfa:APIVersion=\"Acroform:2.7.0.0\" xfa:spec=\"2.1\"><p style=\"font-weight:bold;text-decoration:none;letter-spacing:0in\">The new link the user have entered is:<a href=\"" + textfield.rawValue + "\">textfield.rawValue</a></p></body></exData>";
      this.resolveNode("lblURL").value.exData.loadXML(linkValue, 1, 1);

Maybe you are looking for