What is the best software to clean up your mac?

What is the best software to clean up your Mac?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

Similar Messages

What is the best way to clean up your mac and make it faster and run to an optimum level?

Hi Everyone, Hope all is well
Iv been running my mac pro for a long time now, its a Mac pro, 2x 2.26 GHz Quad Core Intel Xeon. 12 GB 1066 MHz DDR3 Ram
Over time now it has become slower, at the moment its still running fine but im sure over time it has probabally collected unwanted data etc. i just dont want it to become a problem as its only going to be used more and more... i now notice that some of the regular programs which i open do take a little while longer to open and i sometimes see that little round Mac loading the sign (the round multicolor wheel).., is there a way to clean the mac up? so that it can run more smoothly and just a better over all feel.,,, the machine is still running beautifully but its time i give it more care and revive it a little more..
What are the best ways to do this, i dont trust any of these non apple based products which claim they can clean ur Mac etc.
Any solutaion and advice that u guys can give would be great and i would be very thankful
Thanks in advance

For immediate speed improvements, upgrade to a Solid State Drive and upgrade your conventional hard drives to new ones, because the newer ones are faster at reading and writing than the ones from 5 years ago.
By Re-installing your OS onto a solid state drive, the system will boot much faster, and your programs will launch much faster.
I use a small SSD (only 60GB) which contains only OS X and all my apps. All of my personal files are on the large mechanical hard drive. If you still use the drive that shipped with the Mac, then it might be a good idea to replace it.
Depending on what kind of work you do, then additional RAM will help. Swapping CPUs should only be done if you are really in need of the improvements they would bring.
You appear to have the 2009 dual-CPU Mac Pro, which is the most challenging model to swap CPUs into.

What is the best software for home office for mac pro ?

What is the best software for home office for mac pro ?

Mac-HaBu X 12.2.0.3.841
Gnucash 2.4.11
QuickBooks Pro 2013 14.0.3 R4
MoneyWorks Gold 6.1r5
MoneyWorks Express 6.1.r1

What is the best way to 'clean up" a Mac that has been going for about 2 years. I reset safari frequently but need to be sure stuff I don't want is gone.

What is the best way to 'clean up" a Mac that has been going for about 2 years. I reset safari frequently but need to be sure stuff I don't want is gone.

I'd gather by your "reset Safari" and "clean up" you mean by sites you rather not have your mom see.
Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find first, but need to reinstall Flash again here
http://www.macupdate.com/app/mac/11076/easyfind
http://get.adobe.com/flashplayer/
OnyX run All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
http://www.titanium.free.fr/
CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
http://www.piriform.com/mac/ccleaner
Every web site knows your apx location.
http://www.whatsmyip.org/more/
To be sure to have a clean machine, a
Restoring OS X - 10.6 "fresh install method"
Restoring OS X - 10.7 - wipe and install
is the only way as you only bring files back to the machine that you know what they are, everything else is removed.
https://discussions.apple.com/message/16276201#16276201

What's the best App for cleaning/speeding up Mac using Lion?

Can anyone recommend an App for cleaning/speeding up my iMac and Macbook Pro, both of which use Lion?
Hard drive space is not really the issue, but I can't help feeling that my iMac is not as nippy as it used to be - my basic requirements are:
1) Easy to use. I'm a competent user, but no guru.
2) Will confirm details of what is is deleting, cleaning before it does it.
3) Is reliable and won't crash or bugger-up my system.
4) Actually works - as I said, don't really need to reclaim storage, but would like to speed up my mac
5) Doesn't cost the earth.
You thoughts would be much appreciated.
Cheers all,
Simon.

Do the below and keep your boot drive below 50% filled and not more that 80%, that's about all you can do without a full reinstall of the OS.
12: OnyX cache cleaning
Category: OS X, application and User account software related
Description: Gives OS X, application and user account caches a enema, lets then rebuild again new, resolves strange and unknown issues based on cache files being corrupted .
Only cache files are removed, not users data, files, programs or OS X. Some settings will be set back to normal in Finder and other locations. Spotlight will rebuild a new database.
Problems possibly resolved: Varied: Flash install issues, Dock/Finder/File issues, "ghost files", performance and privacy related
Instructions:
Apple doesn't supply a easy method for the user to self clean the caches, thus we have to turn to third party software.
Use the free OnyX matching your OS X version and run all the initial checks, stop if any give a warning, you have a bigger problem. See #4
Run though all the Maintenance and Cleaning aspects (except don't delete the log files) and reboot at the end (must)
You must be through running all the maintenance and cleaning aspects as this is a "catch all" method and any number of corrupted caches may be responsible for your issues. You need to REBOOT at the end of using OnyX. Canceling the in-between reboot requests is fine.
Read Step #13 and perform the Verify > Preferences before rebooting at the end of using OnyX.
Get the free OnyX here: http://www.macupdate.com/app/mac/11582/onyx More info: https://en.wikipedia.org/wiki/OnyX
Just a few of OnyX many successes:
https://discussions.apple.com/message/18377471?ac_cid=sa123456#18377471
https://discussions.apple.com/message/18421933?ac_cid=sa123456#18421933
https://discussions.apple.com/message/18579487?ac_cid=sa123456#18579487

What is the best software for home movie editing

Have some old home movies that were digitalized from 8mm film to VOB format. Want to edit and clean them up and reformat into modern mp4/H.264 format. What is the best software/app to use on iMAC running 10.9.2? Thank you for any suggestion.

I would expect that iMovie would be quite adequate for this. If you find it lacking, or if you're just curious, take a look at Final Cut Pro X. There is a thirty day, fully functional trial download so you can find out first and whether it's worth $300 for your purposes.
Russ

To video editors: What's the best software video encoder?

I'm relatively new to the encoding world, outside of .m2v for DVD. I have a Mac Pro Dual Quad-Core 2.4 Ghz Intel Xeon system with 14 GB of RAM and running OS X 10.7.2. I have the latest version of Final Cut Studio, which includes Final Cut Pro 7 and Compressor. I also have Adobe Media Encoder, but upon testing, I was (ironically) flabbergasted by the fact that Adobe's encoding software doesn't come with support for .avi output. For that reason, it's difficult to trust it. I love what Compressor has to offer, and its encoding quality is more than satisfactory for any and all Mac-based file types, but obviously, the format limitations outside of the Apple realm present a problem in terms of the variety I can offer a client. I would like to have the flexibility of .flv, .wmv, .avi, etc.
Again, I love the QuickTime options of Compressor. I have read that Flip4Mac has add-ons for the formats which I listed above, but I've never used that software for this kind of workflow. I also have some experience with Sorenson Squeeze, but that was mainly on an Avid platform, and there were various frame size/crop issues with encoding which forced me as a user to jump through MANY hoops (none of those hoops are an issue in Compressor, but, again, file types are limited) in order to achieve my encoding goals. However, Sorenson does offer support for every imaginable file type in its $599 Pro edition of the software. I'd rather not spend that much just for an encoder if unnecessary, but I honestly have no real frame of reference in terms of cost-to-"output variety" ratio.
So, to the many who are much more educated and experienced than I am, I ask, in your opinion as professionals...what's the best software encoder? Is it one of the three I have already mentioned, or is it another software with which I am not yet familiar? I am open to any and all suggestions and opinions. At this point, I am mostly dealing with web delivery, whether it be streaming or downloadable file types, and DVD/Blu-Ray encoding for disc burn. However, as I'm sure you understand, you never know what kind of project will come your way, or what kind of file type and/or size a client will require on any given day. I'm really just trying to get an education on encoding in general so I can stay somewhat ahead of the curve, and be able to deliver as many different file types as possible so I never have to tell a client, "No, I can't do that."
Thoughts?

Sorry that you are not getting help.
I would have said that there are some excellent people I see that hang out in the forums for Final Cut etc that would.
I look more at hardware aspect and had you asked I would have recommend against the 2.4GHz in favor of 6-core 3.33 or 2.93 or something. Giving up GHz for more cores or something never works out.
Then I would have stayed with 10.6.8 (maybe keep Lion handy for testing only).
Setup a good storage subsystem, 6 x 4GB (or 3 x 8GB when using single cpu).
A good place to start is over on www.macperformanceguide.com for setup hardware and testing.
http://barefeats.com/macs11_01.html
Handbrake
http://www.barefeats.com/wst10c3.html
http://macperformanceguide.com/Optimizing-Handbrake.html
http://macperformanceguide.com/Reviews-MacProWestmere-Handbrake.html
Why you want more RAM
http://macperformanceguide.com/Reviews-MacProWestmere-AfterEffects.html
http://macperformanceguide.com/Reviews-MacProWestmere-Memory.html

What is the best way to clean a white Apple keyboard?

What is the best way to clean a white Apple keyboard?

Take the batteries out if applicable, and use a very slightly damped lint-free cloth. Be very careful not to get any actual liquid into it. A brush would also be useful for cleaning between the keys: if you want to get fancy you can buy mini-vacuum cleaners for this, such as this one.

What is the best way to clean a soft screen on a laptop

what is the best way to clean a soft screen on a laptop

i dont know what you mean by "a soft screen", but read this: To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.
http://support.apple.com/kb/HT3226#portables

I'm wifilooking at purchase a ipad2 3G/and I was wondering can I transfer DVDs (from a TV series for instance) from my Macbook pro. If so what is the best software. I already have Popcorn and Titanium toast. Thanks

I'm looking at purchase a ipad2 3G/wifi and I was wondering can I transfer DVDs (from a TV series for instance) from my Macbook pro. If so what is the best software. I already have Popcorn and Titanium toast. Thanks

THANKS FOR YOUR REPLY, I DOWNLOADED HANDBRAKE BUT WOULDN'T LET ME USE IT BECAUSE I DIDN'T HAVE VLC WHICH I DID. WHEN I FINALLY GOT HANDBRAKE TO WORK I SELECTED THE DVD FOR SOURCE AND IT STARTED SCANNING. A HALF HOUR LATER IT SAID NOT RECOGNISE SOURCE. TAKE IT IS ENCRYPTED.
<Edited by Host>

What is the best software metrics for ORDBMS?

hi
What is the best software metrics for ORDBMS?
where can I get information about "Oracle & Software metrics"?
sincerely yours
dan

Hi,
www.oracle.com
Regards,
Sailaja

What's the best way to cleanly stop Goldengate?

For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
Thanks,
Shankar

shiyer wrote:
For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
For routine maintenance/upgrades, just {noformat} "stop er *" {noformat} should be preferred; and when all processes are stopped, mgr can (optionally) be stopped. If you really are waiting endlessly for this to return, the real question is "why": then, perhaps there are other parameters that can be adjusted to make GG stop more quickly. (On the other hand, {noformat} "stop mgr!" {noformat} is harmless, the "!" simply prevents it from asking "are you sure?" before stopping the process.)
I really wouldn't use "kill" unless you really have a good reason to (and the reason itself requiring the process to be killed should be analyzed & resolved). To "kill" a process shouldn't cause data loss (GG always maintains checkpoints to prevent this) -- but still it seems unnecessary, unless there really is something that should be killed. (Aside: I mean, I can kill -9 / "force quit" my browser and/or 'halt' my laptop every time as well, and it would probably be "faster" to -- but it can cause issues (and wasted time) upon restart: i.e., fsck, recover sessions, whatever. Same basic idea, imo.)
There's a reason there are different commands to 'stop' processes (stop vs. stop! vs. kill). Just for example, "stop replicat !" causes current transactions to be rolled back; there typically is no reason for this, you'll just restart that txn when the process is restarted; might as well let the current one finish. And "kill extract" (I believe) will not warn about potentially "long running transactions" that can cause (painful) issues at startup (missing old archive logs, etc). There are probably other examples, as well.
So if this really is "routine", then "stop", don't "stop!" or "kill". If there are long delays, see why first & see if they can be addressed independently. (This really is just a stock answer for a generic question, it would be irresponsible for me to answer otherwise :-) )

I am looking to implement a POS system using my iPad, What is the best software and hardware for POS?

One of my clients wants to transition to an iPad POS system and I want to know what are the best software and hardware options?
I am going to completely upgrade the hardware so I'll need solutions for card readers, printers, cash drawers and iPad enclosures that are compatible with an iPad POS system.
Any help would be appreciated!

We're a small business and we decided to go on iPad POS deployment and started researching. We chose Maclocks iPad POS stand since it is the most secured way to use your iPad as a POS plus its design is awesome and takes 2 minutes to set it up! They have it for iPad mini too.
You can also see Maclocks iPad POS stand in action right here: http://youtu.be/0GaFCt-JDyg
Check it out:

What's the best software for removing suspected bots on a Mac Pro?

What's the best software for removing suspected bots on a Mac Pro?

A reasonable answer to your excessivley broad query, unless you can provide much more context, would take a small book.
Luckily, Thomas A. Reed has written one:
http://www.reedcorner.net/mmg/

What is the best way to clean a Macbook anti glare screen

What is the best way to clean my Macbook Pro anti glare screen

I have used WINDEX ELECTRONICS for about the past 6+ months:
http://www.windex.com/en-US/Products/Pages/electronic-cleaner-and-wipes.aspx
I apply it with a small damp microfiber cloth and wipe the excess off with a large microfiber cloth. The display looks the same when it came out of the box.
THIS IS NOT TO BE CONFUSED WITH ORDINARY WINDEX GLASS CLEANER.
Ciao.

What is the best software to clean up your mac?

Similar Messages

Maybe you are looking for