What is the best subscription for use in US and Au...

I regularly travel between US and Australia.  I have postal addresses in both locations and credit cards from both countries.  So I can purchase from either location.
I want to be able to make calls to US land lines and Mobiles whilst in either countries.  What is the best subscription for me to buy and in which country should I purchase it?
NOTE: I am not really concerned about calls to Australia.  I don't make that many and so am happy to pay as I go for the Australian calls.

Probably best option would be Unlimited US&Canada subscription, which you can get if you are located in US.
It will be displayed here: http://www.skype.com/go/subscriptions
If you are outside of US or Canada then this subscription is not offered.
It doesn't matter where you are located when placing calls, but with subscriptions it does matter where you are when purchasing.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Similar Messages

  • What is the best practice for using the Calendar control with the Dispatcher?

    It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security.  However, the Calendar relies on this endpoint to build the events for the calendar.  On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works.  We've noticed the same behavior on the Geometrixx site.
    What is the best practice for using the Calendar control with Dispatcher?
    Thanks in advance.
    Scott

    Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
    Example: http://www.cariboowoodshop.com/wood-shop.html

  • What is the best  way for using a  C++ in the EJB?

    What is the best way for using C++ in the EJB ie
    either 1. Socket programming
    2. JNI

    To what purpose?
    To use C++ in the client you could generate IDL from your remote interfaces and run that through your vendor's IDL-to-C++ processor.

  • HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

    what is the best method for using a iphoto with an external hard drive for greater capacity?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • What is the best practice for creating master pages and styles with translated text?

    I format translated text all the time for my company. I want to create a set of master pages and styles for each language and then import those styles into future translated documents. That way, the formatting can be done quickly and easily.
    What are the best practices for doing this? As a company this has been tried in the past, but without success. I'd like to know what other people are doing in this regard.
    Thank you!

    I create a master template that is usually void of content, with the exception I define as many of the paragraph styles I believe can/will be used with examples of their use in the body of the document--a style guide for that client. When beginning a new document for that client, I import those styles from the paragraph styles panel.
    Exception to this is when in a rush I begin documentation first, then begin new work. Then in the new work, I still pull in those defined paragraph and or object styles via their panels into the new work.
    There are times I need new styles. If they have broader applicability than a one-off instance or publication, then I open the style template for that client and import that style(s) from the publication containing the new style(s) and create example paragraphs and usage instructions.
    Take care, Mike

  • What is the best subscription for greece?

    hello. i have read almost everything here, but it's a bit confusing so i would like your help.
    i want to make a subscription (or premium) for unlimited calls to greek mobiles and landlines.
    what is the best offer i should take? i don't care about video calls, or live support or sms's
    as far as i know making a premium account for a year, seems to be the most profitable for me, but i don't know if i will have unlimited calls to mobiles. so that's why i am opening this thread. thank you

    Probably best option would be Unlimited US&Canada subscription, which you can get if you are located in US.
    It will be displayed here: http://www.skype.com/go/subscriptions
    If you are outside of US or Canada then this subscription is not offered.
    It doesn't matter where you are located when placing calls, but with subscriptions it does matter where you are when purchasing.
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • What is the best printer for use with iMac osx lion 10.7.4

    What is the best printer to purchase for use with imac osx lion 10.7.4. Preferably an all-in-one with wireless capabilities. around $125-$150

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

  • What are the best practices for using the enhancement framework?

    Hello enhancement framework experts,
    Recently, my company upgraded to SAP NW 7.1 EhP6.  This presents us with the capability to use the enhancement framework.
    A couple of senior programmers were asked to deliver a guideline for use of the framework.  They published the following statement:
    "SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
    I am looking for confirmation or contradiction to the statement  "SAP does not guarantee the validity of enhancement points in future releases/versions..." .  Is this a true statement for both implicit and explicit enhancement points?
    Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
    Is there any SAP published guidelines/best practices for use of the enhancement framework?
    Thank you,
    Kimberly
    Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

    Found an article that answers this question quite well:
    [How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
    Thank you Thomas Weiss!

  • What is the best product for using itunes only?

    I am considering buying a laptop / notebook / ipad or whatever for using itunes only.  The goal would be to add all cd's to the product and then increase my collection via downloads only going forward.
    Can anyone recommend the best product for this please?  I have an ipod nano and I'm new to the iphone, so I'm an Apple convert, although I'd consider a non-Apple product too (sorry Apple!).
    Budget is tight!
    Thanks in advance
    Rufus73

    Without a bit more info, it's hard to answer your question.
    How many CD's do you intend to keep on the PC/Mac/iPad as an iPad has a maximum storage of aprox 55Gb's for the top model, whereas even a basic PC laptop is likely to have 150Gb plus of space. Plus you are going to need a PC/Mac to copy the CD's in the first place, unless you intend to buy all your music from the iTunes store.
    For me I would look at either a MacBook if you can go to the £1000 price bracket, or look at a MacMini and cheap screen then transfer the music to your iPod/iPhone or sadly from a price point of view you may have to go the Windows route as a basic laptop will start at £400
    Mike

  • What is the best program for editing pdf documents and filling in forms

    Whats the best program to use for editing pdf documents and filling in pdf forms?

    Acrobat Pro XI  creative suite 6
    or the newer Acrobat Pro creative cloud
    Been using it now for endless years.

  • What is the best strategy to use both Z10 and Q10?

    Assume I have both a Z10 and Q10 and I'd like to use it on alternate days, what's the best strategy to do so?
    BBM should be fine with the same BlackBerry ID and it can just keep switching between the 2 devices.
    If I am using local contacts and calendars, is there an easy switch to keep them sync on both Z10 and Q10?
    There are also other information to sync in Password Keeper, Remember...etc.
    Is there a solution?

    Hello,
    For calendar and contacts, there is this:
    http://supportforums.blackberry.com/t5/BlackBerry-Q10/How-To-OTA-Sync-BB10-and-non-BES-Outlook-Overv...
    With that, I actually keep all of the following in sync:
    Two instances of Desktop Outlook (2007 and 2010)
    Z10
    PlayBook
    Outlook.com
    And, before I decommissioned it, also an Android device. Any device that can synchronize with Outlook.com can use this solution to keep in sync for calendar and contacts. You, of course, need to not use solely local contacts and calendar but instead keep them synchronizing with Outlook.com.
    For the other things you mention, I know of no solutions other than backup/restore...but I do not recall if LINK offers the selective method for those.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What is the Best Approach for System Defined Fields and Default values

    Hi ,
    Please let me know that what can be the best approach for providing a Default value for the System defined fields when creating a User and How can we hide the System defined fields at the time of User creation

    You cannot provide default values for any attributes defined in the FormMetaData.xml file. You can only provide default values for fields defined in the User Defined Fields and supply a default value.
    You can using entity adapters to populate some of the values, but you must supply an Organization because there is an entity adapter that you cannot modify that verifies the organization name.
    -Kevin

  • What is the best tablet for using photoshop for professional editing??

    Okay, I know Apple and their ipads are popular.  But popularity is not what I'm looking for.  I'm looking for compatibility, between photoshop and the tablet itself.  I want to get over using the mouse for everything.  I'm not quite sure if apple is the best choice.  Or is it? 
    I'm very new to all this tablet stuff. lol  Please advise
    Oh my goodness.  Is the Ipad not advanced enough for a full blown photoshop program?! I geuss I overestimated them. Goodness.  It really is just a on the go kind of thing?....  Again. I'm new to this whole tablet thing.  So if you guys know anything. Please advise lol.  I'm a complete Newbie.

    Windiv, 'Tablet' - the generic term is used differently for each context. iPad is a generic tablet. While for Photoshop editing, you need a tablet such as Wacom Intuos - they're 'design tablets' in specific. They have 'full-blown' capabilities with Photoshop and majority of other Professional Graphic softwares.
    Visit this link for more information: http://www.wacom.com/en/products

  • What is the Best Configuration for using SSD & HDD Internal Drives in iMac?

    Hi,
    I have a Refurbished 2011 21.5" iMac. It came with a 1TB HDD. I had a 120GB SSD custom installed by Other World Computing.  I would like to reap the speed benefits of having the OS and applications reside on the SSD and having most of my heavy, frequently used data on the HDD.  I've considered simply going the route of changing the advanced settings of my user configuration so that my home directory is located on the HDD.  I've read this is an ok solution, but that there may be better ways to do this to get the best out of the available speed of the SSD.  Could anyone recommend better options?
    For reference, I use apps like Photoshop Lightroom, the NIK suite of photo editing applications and Photoshop CS6 pretty heavily.  I don't do much movie editing or production...only occasional slideshows in iMovie...although I do keep a lot of old, imported, video footage of my kids on my HDD and on my backup system.
    Thanks,
    Ben Shugart

    Start with the only Apple doc I could find: http://support.apple.com/kb/ht5446. They tout the technology, but don't provide much in terms of help.

  • What are the best practices for using Lightroom at two locations

    Here is the problem:
    Photographer works weekends and vacations at another location with a second (non-portable) computer.  Photographer wishes to keep two separate but identical copies of the entire photo library and LR catalog for safety.  At the end of a period of work at location 1, photographer wants to take all the changed files (some new, some just modified) and update the LR catalog and the photo library at location 2.  This could be done via internet but possibly it is more practical to transport the changes on a "go-between" drive.
    Anybody have an opinion on the best ways to do this?  Is there a way to just export (as catalog) the changed files and folders and then import at the other location?  Manually copying the folders of photos that we think have been changed runs the risk of missing some.  Simply copying everything means carrying close to 2TB and this will also take a lot of time before each trip.  Not so practical every weekend.
    Advice and ideas appreciated.

    I had just started exploring smart collections (never looked at this before today) as a way of trying to collect changed/new files and metadata when I walked back into my office from my wife's (she's the photographer- i'm just tech support) and saw your reply.  I think this is the direction we are leaning to because it should cut down on the hardware needs.  The other reply that suggested using a third drive would add another layer of protection in that one would always have a recent complete backup on hand in case of sudden hardware failure, but we should be able to keep the risk way down by using a second Drobo 2 at the second location.  Drobo has been reliable and the slowness can be overcome by saving working Photoshop files to the internal drive and only saving the final finished files back to the library on Drobo.
    I am concerned about a possible performance drop if we run both the LT catalog and the file library on Drobos...currently run the catalog on the internal drive based on advice I read some time ago.
    So I assume that it is possible to import the "go-between" catalog into LR on an internal drive while copying the "negative" files to the Drobo at each location.  Hopefully this process is not painfully slow...but I suppose it depends on the number of files that are being exported and imported each time.
    A third method that I have been investigating and would love any comments on from someone who has tried it is syncing the two Drobos via internet possibly using Synchronize Pro-X (first sync done locally!)...this might have the benefit of daily offsite backup in between visits.  One thing that scares me is the possibility that somehow something screws up digitally and data is destroyed on both drives at the same time before one has a chance to discover a problem.  Also how would one verify that the second location Drobo has been properly synced before arriving to discover some problem prevented a successful sync?
    Thank you both for replying and helping me think through this problem.
    Mark

Maybe you are looking for

  • How do I get a refund for Mobile Me that was never hooked up?

    I received an ipad and mobile me for a Christmas gift.  It was put in a moving box and stored until a few weeks ago.  I have recently tried to hook it up but was not successful due to the fact they are taking no more members.  What are my options?  C

  • Adobe Acrobat Reader as default...

    I recently purchased a new iMac and downloaded Acrobat Reader, but I can't figure out how to make it the default program for pdf files instead of Preview... Any ideas? Thanks!

  • UC4 to Management Jobs in Business Objects XI 3.1.

    Hi experts, I'm planning using UC4 to manage the jobs of Business Objects XI 3.1. Does anyone have this scenario? Is there any implementation guides or tips? Thanks Sérgio

  • Problem running Automator .app on different machine

    Hello, I have written an Automator application (QuitTunes.app) that resides on my Mac No 1 machine. It quits iTunes when invoked for my Mac No 1. I have another Automator application (RunQuitTunes.app) that resides on my Mac No 2 machine. It runs Qui

  • Update database from 11.2.0.1 to 11.2.0.3

    Hi all, I have installed 11gR2 *(11.2.0.1)* on Redhat Linux 5.4. No I want to update database version to *11.2.0.3* How to achieve this. This is for testing purpose. Bala:)