What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

We need an editing suite for telecast quality for our church.
What is the best system configuration please?
What are all the requirements to set it up ?

Buy a Desktop Video Editing PC http://www.adkvideoediting.com/
Build a Desktop Video Editing PC
-http://ppbm7.com/index.php/tweakers-page
-3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
-what PC to build http://forums.adobe.com/thread/947698
-2 how to build videos http://forums.adobe.com/thread/1104182
-another video http://forums.adobe.com/thread/1145366
-another video http://forums.adobe.com/thread/1132363
-planning & Building http://ppbm7.com/index.php/intro-part-1
-memory for LGA2011 http://forums.adobe.com/thread/1098759
-an Adobe FAQ http://forums.adobe.com/thread/878520
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge
+E/0xe9b142f408a2b03ab88144a434e88de7.aspx
-several more links http://forums.adobe.com/thread/815798
-build tuning http://ppbm7.com/index.php/final-results

Similar Messages

What is the best RAID configuration for a MacPro as a Logic User?

There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
I want to run video files simultaneously to do nifty audio soundtracking to video.
Here is the configuration I have in mind.
HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
HD 4: Video files / Bouncing (1 TB)
Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
HD 1: OS and Apps. No samples at all.
HD2: Audio Files for Logic projects
HD3: Reason, Ableton, Logic etc instrument sample library
HD4: Video and bouncing.
Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
I hope this helps a little and not just added to the dilemma.

For iPhone and Android, what is the best file format for watching videos?

For iPhone and Android, what is the best file format for watching videos?

You can try these setting. They are from CS5.5 but should work in CS4.
Make sure you check Use Max. Render Quality.

What's the best system upgrade for 'older' Mac Mini?

My MacMini is about five years old:
Model Name:    Mac mini
Model Identifier:    Macmini4,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.4 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    2 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MM41.0042.B00
SMC Version (system):    1.65f2
This mini is still running System 10.6.8, with the 'latest' version of Safari being version 5.1.10.
Lately, Safari fails to perform certain features correctly on certain websites, and I have to switch to Firefox to make the websites work.
Is it time for a system upgrade, so I can run a newer version of Safari? If so, which newer OSX system version would be the best for me to upgrade to?

A few other things to consider if you want to upgrade your OS.
If you are using any apps that are still PowerPC apps, they will not run on
any newer Mac OS. So you will need to find replacements ($$$$).
Also, in terms of apps, you need to make sure the apps you are currently
using are compatible with the newer MacOS. You may need to upgrade ($$$$)
or find alternatives.
Also, you will need to make sure any external hardware that you use with
your Mac is also compatible with the newer MacOS. You may simply need to
update drivers or the hardware may no longer be supported ($$$$).
So, upgrading your MacOS could end up costing more than just adding RAM!!!

What's the best compression setting for exporting video to DVD?

My QT self contained file from FCP is 13 GB (1:02 min long) when I use DV NTSC while exporting. When iDVD finished encoding it, it went down to 3.4 GB (that includes video files in my iDVD menus).
*Since the DVD media is 4.7 GB can I make better quality DVD by lessening compression while exporting from FCP?*
I don't think there is a way to tweak compression in iDVD. And my second question:
*Is "self contained" file better quality than just a reference file?*
*I would like to make the best possible quality DVD and am looking for some tips on what settings would help me achieve it.*

Hi Joby,
Compressor is what you need.
Import your file, choose DVD best quality 90 minutes from the settings tab (lower left window in Compressor). This will allow your movie to be converted as MPEG 2 and ac3 dolby stereo (best compression for DVD audio).
The inspector window (lower right window) will allow you to decide/arrange settings as you like.
If you are not sure about best bit rate choice use the [Bit Budget|http://www.kenstone.net/fcphomepage/bitbudget.html]
As you can see the inspector window offers a range of customizable settings if you are not familiar with those the manual (main menu>help>user manual) will answer all your questions. Simply type a word or definition in the search area and most likely the manual will provide the info you seek.
Self contained means that you create a file with exact copies from your original frames and edit on the timeline, a self-contained file becomes independent from your timeline. A reference movie as the definition says totally refers to your FCP project and wouldn't work on a different machine without referenced media files.
There is no difference in quality between the two QTmovie options.
Hope that helps
G.
PS. Extra info about Compressor and h the best way to create your DVD [here|http://www.kenstone.net/fcphomepage/fcp_homepageindex.html#dvd]

What is the best wireless rotuer for Ichat Video?

Hey everyone I just wanted to know what wireless routers have been found to be the best for Ichat video? I know some do not work with it very well and just want to make sure I get one that does.
Thanks in advanced
Graham

Hi Sepp1414,
Both Defcom and I use a Netgear in the DG834 range.
Mine is a DG834GUK
Before that I had a Thomson Alcatel 510v4 which needed and had done the SIP unbinding to be able to contact everyone I tried.
Many Linksys seem to OK.
Things to avoid at present
The BT Hub in Great Britain
Any Pre-N or MIMO device These try to guess what the 802.11n format will be. iChat does not like these for some reason although some are reporting success.
Some devices offer VoIP (Allowing Land-line phones to be connected to the internet). These have SIP bindings of various sorts and are not unbound the same way the Alcatel range was. They can work if placed in the 'right' place in the LAN
9:29 PM Tuesday; December 5, 2006

What's The Best Sharpening Technique For HD Video Production

I use Photoshop CS5 to produce stills for use in high def video production. After editing 400+ photos often using a modest <1 pixel radius & 100% smart sharpen I found that the results looked terrible. I'm going back and eliminating most sharpening. Is there a decent sharpening approach for this end use? I used to work with the unsharp mask which so far has produced better results.

Even though I've been doing DVD's for personal use for about 10 years it's only in the last 2 years that I've been doing 1080p Blu-rays and while the results can be excellent as you suggest there's less room for error as sharpening artifacts can show up. In the past I used an unsharp mask technique with very small radius (1 pixel or less radius & less than 100%) and the results have been pretty good. In my never ending quest to improve I tried the new smart sharpen which works on the edge boundaries and I also applied a conservatively low size & percent.
But I'm now of the opinion that while this looks great on small (24") HD displays of the tif image, it looked terrible in a test BD. The best way I can describe it is looking like a "cheap printed image" on my large screen plasma. Possible my conservative approach was not conservative enough. This may be fine for a printed image or even an SD video.
I can do some really good night citiscapes using high ISO @ about 2 stops under but they still need sharpening. If I were doing this professionally I'd use a tripod & lock up the mirror. But I'm not so I'm trying to help with the slight lack of sharpness. Same is true but @ lesser extent with daytime photos.
I also agree with you about not using sharpening at all. I found that no sharpening was better for my use than the smart sharpen as I applied it but an unsharp mask might be a little better than the smart sharpen.
Thanks Hunt
Alan

What is the best HD codec for uploading videos to youtube?

Also, what is the aspect ratio, pixelation, resolution, and color depth for that codec?
Message was edited by: General Oswald

http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132460

What is the best way to ensure broadcast-ready files to DMDS from Adobe Premiere Pro CC?

After submitting my 708 closed-caption HD video to DMDB for broadcast they said there were no captions.
I initially exported the video as a .MXF file from Premiere Pro CC. In my source preview window the closed captions appear, but for some reason DMDS could not read them. Im looking for a way to get closed-caption videos broadcast ready for submittal to DMDS.
In addition, when close-captioning for 708, the closed caption text appears with dots between each character in a word, and the background color is shifted to the right, leaving the first letter of each caption hangin out of it's background. Im assuming it's a Premiere Pro CC glitch, but I'd like to be able to communicate this with some certainty to any clients who may ask about it.
Pleas advise.

Very interesting.
I'm about to submit HD captioned spot for Extreme Reach, they specify only an mpeg2 transport
stream for keeping the captioning data.
I did the 608 and 708 captions just above the video 1 track in premiere cc and they check
out when setting the caption previewer to 608 or 708 in the program monitor.
if I import that mpeg2 file BACK into premiere and play it the captions
are not showing.
I Just now exported an .mxf and saw an option to EMBED captions in the file
instead of just the side car option normally there.
THAT WORKED! re-importing to premiere I see the captioning on track 2 and 3
and they do play.
But Extreme Reach requires the captioning in an mpeg2 TS container, not mxf.
I tried converting the mxf to mpeg TS but the captioning gets stripped out.
any ideas or suggestions?

What is the best battery configuration for lenovo 420s

I read on the lenovo website that you can get up to 9 hours on the thinkpad 420s and I was wondering if anyone knew the battery configuration to achieve this setting? So far I only get up to 3 hours maximum IF I have it on very low performance. I usually keep it on maximum performance when it's plugged in. Anyone have any ideas?
Solved!
Go to Solution.

I would imagine that would be achieved using a 9-cell battery plus the supplementary battery that can replace the optical drive in the Ultrabay slot. http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

What is the best backup configuration for a home lab?

Depends on your budget and complexity requirements. Offsite? Redundant? Free or paid? You also don't need a product to backup VM's and you can script this as well. Some good products that are free for a couple VM's are Veeam and Unitrends.

Hi there,
I am currently making a home lab environment to learn Microsoft technologies (at present), I wish to create a file server to store evaluation software, documentation and personal data. I currently use a total of 100GB of hard disk space for all this data...
How often do you recommend me backing up this data using Windows Server 2012 R2?
I also plan on implementing Volume Shadow Copy in the near future...
This topic first appeared in the Spiceworks Community

What are the REAL system requirements for High Definition Editing?

According to Apple, you can edit HD in iMovie with: a G4 1GHz or faster processor, 512MB RAM or higher, and OSX 10.3.6 or higher.
I am running a G4 iMac 1.25GHz with 512MB DDR SDRAM and Tiger 10.4.3
My machine can barely import HD from my new Sony HDV1080i camcorder. It imports at anywhere from 1/8th speed to 1/2 speed.
But more importantly, the playback in iMovie of my HD clips is not smooth -- the playback looks jagged, as if the computer cannot quite keep up at full speed.
Would upgrading from 512MB RAM to 1G RAM likely solve my problems with the slow import and the jagged playback?

Would upgrading from 512MB RAM to 1G RAM likely solve my problems with the slow import and the jagged playback?
No. A faster Mac with a faster video card will help.
The playback in iMovie is never as good as it will be on TV, even on DV. It must be even more difference for HDV.

What is the best user guide for my ipod touch 2nd generation using ios 4.2.1?

I have a second hand ipod touch 2nd generation using ios 4.2.1, this is my first mobile apple device and I want to read up on it this weekend but the guides seem to be for devices running ios3 on 2nd gen or 4.3 on 3rd+ gen, none for 2nd gen with ios4. is there one i haven't found or should I read the ios3 guide then the ios 4.3 guide?

And here is a video that someone else did walking through some of the features on a 2nd gen:
http://www.youtube.com/watch?v=sr1jYOMyQhU

What is the best leaked OS for Z10 and why??!

What is the best system update for the BlackBerry z10 in terms of battery and use of the device?>>> "leaked ones"
Please advise me please ^ ^ Thank you??

Hello AZUZJUMA.
Amigo is depends on the taste of each person acuerdate each OS works differently on each device, but in my case I recommend the OS 10.1.0.4543 is one that has been more fluid and has been much better in performance ...
I'll leave the link for you to download if you like.
http://crackberry.com/leaked-os-10104537-blackberry-z10
Regards.
Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
@ gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

What is the Best Safari Version for OS 10.9.5 Maverick on a MacBookPro, 2.4Ghz, 8 GB Mem.?

What is the best Safari Version for OS 19.9.5 Maverick on a MacBook Pro. 2.4 Ghz, with 8 gb memory?

The best version for Mavericks, in fact the only version, is an integral part of OS X. In other words you already have it.
Its version number is 7.1.5.
Keep OS X up to date: Update OS X and App Store apps on your Mac - Apple Support

What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

Similar Messages

Maybe you are looking for