What is the best way of architecturing SWCV in PI

Hi,
I have 4 different ways of architecturing my interfaces in SWCV,
Approach 1: Single Software Component version (SWCV) for all Interfaces
Approach 2: Single SWCV per interface scenario
Approach 3: Separate SWCVs for sender and receiver
Approach 4: Separate SWCVs for sender, receiver and mapping
Can any body tell me from their designing experience which is best recommended and used with examples.
Also provide some advantages of it in terms of version management,maintainance,reusability and transport.
Thnx
Chirag

Chirag,
if you think about the logics - the design shoud meet the company architecture. It is no problem to design all interfaces in 1 SWCV or do separate SWCV for each scenario if u have 10 interfaces. But think about this, if you'll have 500. So I don't think that approach 1 and 2 are useful.
So go for 3 or 4. I for example always use 3. Yes, the truth is, that mapping is done by XI, but why to create SWCV for only data types and then SWCV for mapping? This was not the way how SAP engineers thought about it I think. And where to put the mapping in approach 3? I place for example mapping always in the target system's SWCV. Approach 4 is also possible and used, but as I said - why to have mappings and other objects separatly? But this dependes only on your decision.
Peter
p.s. If you want to have every interaface separatly, you can create them in different namespaces
Edited by: Peter Jarunek on Feb 12, 2008 10:55 AM

Similar Messages

What's the best way to handle this?

I'm not sure what APIs/setup to use for this situation:
A company wants to store data projects they do for clients. Each year, the data fields are set (as a result of gov't requirements) and they won't change for any client project for that year. however, the fields required can (and usually do) change every year. So things they require this year, might not be needed the next year and new fields might be introduced.
While there are likely to be many common fields from year to year, there's no way to guarantee which ones will remain consistent. They also want to be able to do searches on the data and fields, for projects within a year and across years.
What's the best framework/API/configuration to handle this? EJB? Simple JDBC? If so, how should the database be handled? Won't it have to constantly create new fields in a table? Or is there another way to handle this?
What's the best way from a "clean architecture" standpoint?

dang, I really have to start over? I finally got all this stuff working again. well, hopefully it won't be as big a pain this time since the data won't be coming from a different machine. After completing the Migration Assistant process, I had to reinput a bunch of serial numbers for apps, reinstall print and mouse drivers, etc... I've finally got the new machine up and running smoothly and now I gotta start over? Sigh.
I was hoping that either I could rename the current account after deleting the other one, or just move everything from one account to the other and then delete the 'RJM' account.
ok, so it sounds like here are the steps I need to take:
- make another full cloned backup of this current machine in Super Duper
- reboot this machine using the advice in the first post, wipe everything clean and reinstall the OS
- create a new account like 'user1' and re-do software update (which is like 2.5 gig worth of stuff) and takes like an hour even on a high speed connection
- then re-do the migration assistant process to the properly named account
- then delete the 'user1' account
does that sound right?

What is the best way of converting a Top Level VI into a 'sub vi' - or function ( without duplicating programming)

Hi,
General question here about design architecture, which i keep running into, but haven't found a really good solution. If i write a 'Top Level VI' to do something, what is the best way of converting it into a subVI - which is call-able from other VIs, while still allowing the top level VI to have synchronised feedback/indicator updates.
I guess the point is that when something is a top level VI you write gui logic about what happens when someone clicks buttons or whatever - which you don't want in the 'sub vi' version.
I did at one point try having a hidden boolean button that was an input to the subVI which would let the VI know if it was supposed to be doing the front panel stuff - or simply running as a subVI. This isn't really ideal though - since it would be better to be able to hive off the grizzly useful stuff from the fluffy - front panel updating stuff - having them together makes the VIs rather untidy. More annoyingly though, if you have the front panel version of it running - say waiting for you to hit 'go', it breaks all the other VIs that use it as a sub vi - since they can't compile when a sub vi is already running.
Another possibility that i tried was to basically duplicate the vi so that there was a backend part, and a front end part - and when i click 'go' the backend part is called as a sub vi. The problem with this is that it really limits the interface that the user gets - since none of the controls on the front panel update with the results untill the sub vi is over. I guess again i could solve this by passing references to some of the controls to update them in the subvi - but this doesn't really seem like the ideal situation if the subvi is called by something else without the same types of controls etc.
One final idea i had was to essentially paste all the controls in the VI into a global variable file, and make the sub vi update them, and the front panel VI read from them. This seems to 'work' - although clearly it is a work around rather than a proper solution - since i spend loads of time worrying about how i update cluster variables in the global - reading and writing.
Does anyone have any guidance on what they do to solve this problem?
JP

You could run a subvis in a Subpanel on your top level. Lets you see the current data while the subvi is running.
--Using LV8.2, 8.6, 2009, 2012--

What is the best way to migrate from Forms to ADF?

We are in a big quagmire. Our company has been into Oracle Forms development for over 15 years. We have applications developed in Forms 6i and 10g. We have about 5 products and these 5 products have about 25 to 30 different versions. i.e. we maintain about 30 different versions of our applications. Each version of the application has about 100 forms and 100 reports.
Now, since Forms has come to the End of life from 11g we want to move to ADF. We tried Forms to ADF migration tools but failed. So now we have decided to manually rewrite the applications in ADF.
Our Forms / PL/SQL developers, designers and analysts (total about 40) are all Oracle Forms people. They have no experience in Java.
What I want to know is:
(1.) What is the BEST way to achieve this?
(2.) Do we have to learn Java, JSF and ADF?? (i.e. All 3)?
(3.) Is it mandatory to learn JSF??
(4.) Assuming, comprehensive training can be given, how long will it take for Forms people to learn ADF?
(5.) What type of training will be required?? (Java, JSF, ADF, JDeveloper etc.)
(6.) How LONG will this take? i.e. to train all 40 and then get rewrite an application of 100+ forms and 100+ reports? (Ballpark is OK).
(7.) Any other technologies we should learn??
Edited by: user12240205 on Jul 18, 2012 5:48 AM

Obvoiusly the longer you have for training the better but I think the minimum would be
1) Java skills - I think to start off, 1 or two days reading something like Head First Java http://www.amazon.com/Head-First-Java-Kathy-Sierra/dp/0596009208
2) I'd then get "The Quick Start Guide to Fusion Development" http://www.amazon.com/Quick-Start-Oracle-Fusion-Development/dp/0071744282/ref=sr_1_1?s=books&ie=UTF8&qid=1343201618&sr=1-1&keywords=jdeveloper+quick (declaration: I'm the author so have a vested interest, but I still think its a good place to start. - this should be about 2-3 days to read and also to try things out.
3) In parallel I'd be watching these ADF Insider Basics http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html#a1 - a couple of hours
4) I'd then try this tutorial http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm - 3 hours.
5) Optionally, if you are coming from a Forms background I would also read http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/SummitADF/SummitADF_Redevelopment.pdf and watch http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/Forms_Redevelopment_ADF/Forms_Redevelopment_ADF.html - which is about 2 hours of work.
I think this would be the absolute MINIMUM to at least be able to build some basic applications and to start feeling your way - everything else outlined in the "ADF COLLATERAL TOUR" http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADFTour/ADFTour.html could be learned as you start building some proof of concept. However, I'd wouldn't suggest you try building a real application with only one weeks exposure (in the same way I wouldn't expect you to design a product database with only one week training). I would probably expect your developers to have at least the above training and then spend about a month or so (minimum) building proof of concepts (or testing themselves with the ADF Insider Essentials Tasks). Furthermore, I'd probably expect you to have at least on senior developer/architect, with much more experience who can be making decisions on things like reuse, partitioning, architecture etc.
Of course, this is all subjective but I hope it helps.
regards
Grant
ps
Of course, we also have formal Oracle University Training courses which you could attend (or they can be purchased to watch on line).

[Flex 4.5.1] What is the best way of adopting a flex built website for mobile "as is"?

What is the best way of adopting a flex 4.5.1 built website for mobile "as is"?
I have a website built with flex 4.5.1 which I want to be working on mobile as it should - meaning that touch style of interactions should be working not mouse.
The question is: Do I HAVE TO recode all of my website from Application into Mobile Application in order to be a more lightweight version of the original one, which includes: remove some functionality, pages, animation, build a separate backend and cms to control it etc.?
OR
Can I just define mobile skins, for my existing components to use when in mobile mode, in which I could have done some tweaking by removing some unnecessary parts and changing component interactionMode to Touch ?
Are both options which I see possible and if yes - which one would you recommend?
Thanks in advance!

Thanks for the answer. Yeah I bet you figured out what I want the answer to be, but is it ? That's why I am asking here. I can see my website on my HTC Desire HD and it's working pretty well. If I reskin the parts that need a bigger hit area or the scrollers to work with touch so I don't have to scroll the actual scrollbars with my finger, remove some complex animations - everything will work just fine... The problem is that I am not sure if that is the right way to do it or if it is possible at all.
I do get your point about not designed for mobile stuff, but while with html 5 you get the job done for web and mobile with little differences at the same time, in flash you need double time cause you'll have to build 2 projects. And since the framework is one for both web and mobile.. why not...
I want to see the pros and cons of the both approaches I suggested. In a complex modular architecture I could easily swap one web module with a mobile module for example or change skins or components if I need more lightweight ones, but do I have to copy all that logic in to a MobileApplication, can't I do it with Application and use the MobileComponents (which are simplier and less functional) if the project actually needs them...
I do hope you get why I am asking these questions, and I can't believe I haven't found a guide or something like that "why this and not that" when it comes to mixing web with mobile development and flex... If you have, please share the link, I would be happy to read. Or someone with the experience in what I am talking about shares some knowledge, that would be great!
Thanks.

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526

What is the best way to read and manipulate large data in excel files and show them in Sharepoint

Hi ,
I have a large excel file that has 700,000 records in it. The excel file has a few columns that change every day.
What is the best way to read the data form the excel file in fastest and most efficient way.
2 nd Problem,
I have one excel file that has many rows each row contain some data that has certain keywords.
What I want is to segregate the data of rows into respective sheets(tabs ) in the workbook.
for example in rows have following data
1. Alfa
2beta
3 gama
4beta
5gama
6gama
7alfa
in excel
I want there to be 3 tabs now with each of the key words alfa beta and gamma.

Hi,
I don't really see any better options for SharePoint. SharePoint use other production called 'Office Web App' to allow users to view/edit Microsoft Office documents (word, excel etc.). But the web version of excel doesn't support that much records as well
as there's size limitations (probably the default max size is 10MB).
Regarding second problem, I think you need some custom solutions (like a SharePoint timer job/webpart ) to read and present data.
However, if you can reduce the excel file records to something near 16k (which is supported rows in web version of excel) then you can use SharePoint Excel service to refresh data automatically in the excel file in SharePoint from some external sources.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Custom Report : What is the best way ?

Hi!
My customer doesn't like native TestStand 's report layout. He would prefer something like the example enclosed to this post.
What is the best way to achieve this ?
XSL customizing (seems heavy work) ?
Using the report generation toolkit and a Word template ?
Any other idea ?
Attachments:
Report Style.JPG ‏115 KB

Have you examined all of the examples found in the TestStand help:

I have an old 30" apple cinema display (2005) I want to use as a 2nd monitor to a new iMac (2012). I don't just want mirror image of iMac; what's the best way to do this?

I have not bought the iMac yet but will do so very soon and just want to make sure I have what I need to get everything setup including adding the old faithful 2005 30" cinema display. Currently I am driving the old 30" cinema display with a macbook pro also purchased 2005 and happy to say I got a lot of good miles out of this rig. What's the best way to connect the old 30" monitor as a second display for the new generation iMacs?
Other Questions
I can find online new in unopened box a 2012 iMac 27" i7 with 1T Fusion Drive for $1899 no sales tax. This seems like a pretty good deal since I notice the same is available from Apple refurbished for $100 more plus sales tax. I know that they say the Fusion drive is a lot faster on 2013 models but some of the speed tests I reviewed online showed the 2012 i7 and 2013 i7 very close on speed for both storage and processing. Any thoughts?
I don't like changing batteries so I would buy a separate Apple keyboard with numeric pad since it only comes with wireless keyboard. I'm a trackpad enthusiast having been using my macbook pro trackpad with current set up; and I am prepared to buy the Apple trackpad and replace batteries every 2 months but I would greatly prefer USB connection and rechargeable trackpact. I know Logitech makes one so if anyone is using and knows how it compares to Apple's I'm all ears.

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
Facts:
In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
Thanks in advance for any help!

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

What is the best way to open a HTTPS connection?

What is the best way to open a HTTPS connection and retrieve the content as XML? This is how most of the online API is done nowadays, how can this be done on the iphone SDK?
Thanks

Have a look at the SeismicXML example that comes with the iPhone SDK. It uses http instead of https but it may work for you.
You can also look at the NSURLRequest and NSURLConnection classes.
Enjoy.

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

What is the best way to verify default heap size in Java

Hi All,
What is the best way to verify default heap size in Java ? does it vary over JVM to JVM . I was reading this article http://javarevisited.blogspot.sg/2011/05/java-heap-space-memory-size-jvm.html , and it says default size is 128 MB but When I run following code :
public static void main(String args[]) {
int MB = 1024*1024;
System.out.println(Runtime.getRuntime().totalMemory()/MB);
It print "870" i.e. 870 MB.
I am bit confused, what is the best way to verify default heap size in any JVM ?
Edited by: 938864 on Jun 5, 2012 11:16 PM

938864 wrote:
Hi Kayaman,
Sorry but I don't agree with you on verification part, Why not I can verify it ? to me default means value when I don't specify -Xms and -Xmx and by the way I was testing that program on 32 bit JRE 1.6 on Windows. I am also curious significant difference between 128MB and 870MB I saw, do you see anything obviously wrong ?That spec is outdated. Since Java 6 update 18 (Sun/Oracle implementation) the default maximum heap space is calculated based on total memory availability, but never more than 1GB on 32 bits JVMs / client VMs. On a 64 bits server VM the default can go as high as 32gb.
The best way to verify ANYTHING is to address multiple sources of information and especially those produced by the source, not some page you find on the big bad internet. Even wikipedia is a whole lot better than any random internet site IMO. That's common sense, I can't believe you put much thought into it that you have to ask in a forum.

What is the best way of architecturing SWCV in PI

Similar Messages

Maybe you are looking for