What is the best way to apply Support Pack Stacks among satellite systems

Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.P

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

Similar Messages

What's the best way to apply a detuned effect to a piano (audio or midi)?

Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
Thanks

Are you looking for a Honky Tonky Piano effect?
you need two istances of the same piano (exs24 Logic patch are great)
use fine detune (pitch) only one of the two piano istances.
G

What is the Best way to apply granular password policy

I am trying to apply Fine Grain Password Policy in small groups to my users, I have set the password expiry to 10 days
for testing. But the moment I apply the policy, users start getting password change notifications immediately, Outlook or
Lync start asking for a new password.
Should it not wait for 5 days to start poping-up on the clients that they have 5 days left to change there passwords.
What is the best I can do not to disturb the users, I cannot do this at night because most users have mobile devices. Windows 2012

Hi Petro,
In addition to Mihai's answer, also consider checking/changing the 'Interactive logon: Prompt user to change password before expiration' which by default is 14 days. I think there is a default notice period of 5 days but for Windows 7 or 2008 R2
servers that don't have a Group policy overriding the local policy (not domain joined). I am not sure how that applies to 2012. So if you haven't changed that to 5 days, it might be the cause of the problem.
On a PSO object I don't think you can set the password change notification.
The settings can be found in Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options\Interactive logon: Prompt user to change password before expiration.
References:
http://technet.microsoft.com/en-us/library/jj852243.aspx- Interactive logon: Prompt user to change password before expiration
http://technet.microsoft.com/en-us/library/cc770842(v=ws.10).aspx - PSO Step Guide
http://mariusene.wordpress.com/

What is the best way to write management pack modules?

i have written many modules using powershell script but when i deploy that management pack on SCOM it is throwing so many errors saying powershell script has dropped due to timeout.
My Mp has lot of powershell script which gets the data from the service which executes for each and every instance the mp certainly has around 265 Instances and the powershell have to execute for each and every instance.
how can i improve the scripts?
do i need to use someother scripting language like javascript or VBScript in the management pack to execute different modules.
what is the best practice to write Modules
i have useed even the cookdown for multi instance data gathering
Thanks & Regards, Suresh Gaddam

One thing you have not mentioned is how you are consuming the data after you save it. Your solution should be compatible with whatever software you are using at both ends.
Your data rate (40kS/s) is relatively slow. You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop. I would recommend a producer/consumer architecture to decouple the data collection from the data writing. This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ). If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes. This will make it slower, but should not be an issue at your write speeds. Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
If you have further questions, let us know.
This account is no longer active. Contact ShadesOfGray for current posts and information.

What's the best way to load FieldPoint measurement data into PI System?

I am finding the best way to load data collected by NI Field Point (FP2220) into the PI system of our power plant.
I found pieces of information about FieldPoint OPC server in NI.com. Not sure if it comes with Field Point Hardware, sold by NI as a separate product or it is actually non-standard NI products. Anyway, I know that there exists a thing called FieldPoint OPC server.
The PI system I mentioned has a OPC client software called PI-OPC interface. It is able to communicate with standard OPC DA server. If that FieldPoint OPC server is a standard OPC DA server provide data collected by Field Point complying to OPC standard, than that's perfect.
Anyone familar with PI system and NI product, please help if the above is going to work or if there is a better way to put Fieldpoint data into PI.

Hi Eric,
This information really helpful, thanks. Regarding to the NI OPC server for NI FieldPoint, I have the other query.
In my setup, there are two sets of FieldPoint located in two different locations on my ethernet network. They are going to be controlled by a single PC. If I am going to connect both my FieldPoint sets with OPC standard, how many NI OPC server for FieldPoint do I need to connect to? Are there two NI OPC servers each serves one FieldPoint set? Or there is only NI OPC server which serves both FieldPoint sets?
I am concerning about the number of NI OPC server instances running, because the number of OPC client license I need to purchase depends on how many OPC server I need to connect to. If one NI OPC server serves both my FieldPoint sets, I only need to buy one OPC client license; otherwise, I need to purchase two. In the future, I am going to have another two sets of FieldPoint sets, so the answer of my query determines how many OPC clients I need to purchase eventually - One or four. A huge price difference.
Looking forward to your reply.
Regards,
Roger

What is the best way to apply a template to the rebranded partner site?

My partner site got severely jacked up when I was brand new to BC.
Since then I've overwritten it in Muse while attempting to "try' it as well.
Apparently does some "cleaning" meaning the template files I once had access to in the templates folder got deleted. bleh.
Is there a quick way to apply another template I own to that site such as publishing a trial site and re-pointing dns or anything that direct and smart; or is the only way to do it a manual, one by one by one of files, modules, content holders and so on?

Hey there,
If you want to access those partner site templates, layouts and everything else, here are some FTP details you can use:
host: maxdesigncompany.businesscatalyst.com
username: maxdesigncompany.businesscatalyst.com/[email protected]
password: password
Feel free to log in through FTP and download the whole site. All the modules should work since the module IDs on your site will match those on this site.
Cheers,
-mario

What is the best way to apply QoS to CAD

The CAD agent that are working remotely are seeing performance issues. Hence, would it really be better to apply QOS to the CAD workers for better performance or would it just be better to give the remote workers a VMachine and have all the CAD application run locally?

Enterprise
all the teleworkers have business class cable connection with a Cisco 800 router. I know big companies are seeing the same issue latancy that is probably caused by convergence time) maybe from a WAN hiccup. in reference to the VMare -Citrix, was just idea to throw out as a better solution for a more stable enviornment, but the service control messages maybe see a lag over the WAN ...its trading one evil for another...I know CIsco mobile workers are using the CVO solution...(similar to our setup)...thoughts?

What is the best way to connect my laptop to a sound system?

Hi I use my laptop to run videos and sound tracks for our church. I am all taken care of as far as the video. My problem is with hooking up the sound from my Or any PC to the sound system. I am within 10 feet of the 32 channel sound mixer for the sound system. If we use the earphone jack with adapters to input to a channel on the sound board the sound is poor and has a slight hum. I think there has to be a better way because I see singers using their laptops for sound tracks and getting good clear sound. Would someone HELP me please ? Thanks

I'd think about going with an external USB sound device, leaving the signal as digital for the major length of the cable run, then the USB box then only a short run of analog, which could then be with some cable that has better noise rejection than most cables with mini-headphone plugs.
Maybe something like the Alesis iO-2
http://www.bhphotovideo.com/c/product/403523-REG/Alesis_IO_2_iO_2_USB_Audio_Interface.html
Probably overkill, but that's the idea I'd go for. Plenty of other boxes that'll do the job. That box at least would let you use 1/4" patch cables, there are probably others that would let you go with XLR.

The best way to apply Themal Grease

In your opinions, what is the best way to apply thermal grease when using an aftermarket heat sink for CPU cooling?
Is it best to apply the grease to the heat sink (taking a chance of it smearing across the CPU) or apply directly to the CPU in the correct area and then placing the heat sink on the CPU?
I ask because I have never tried an aftermarket heat sink before and don't want to screw things up
Thanks guys for all the help

well the reason ask is because the last time i tried it on the heat sink and stuck the heat sink on the cpu, the grease gooped over to the other parts of the cpu it's not supposed to be on. so i removed the heat sink, cleaned everything up and then applied to the cpu on the die, smoother it out and stuck the heat sink on and clamped it down. when i removed the heat sink, it look all nice and pretty and not sloppy.
didn't know if you guys had any other ideas. of course, i didn't know how much actually needed to be applied. so i'm thinking i might have put too much on in the first place

What is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things don't work or aren't supported these days. can't update my iphone, download video, etc. can i get the latest software? thanks.Ask your question.

what is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things are not supported these days. can't download software, update my iphone, download video, etc. can i get the latest software? thanks for the help!

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

I am a Creative Cloud customer . . . what is the best way to contact Adobe Customer Support???

I am a paying Creative Cloud customer . . . that being said . . . what is the best way to contact Adobe Customer Support???

Hi miami730,
Please refer the link: http://helpx.adobe.com/in/contact.html to contact customer support.
Regards,
Romit Sinha

What is the best way to add AJAX support in an existing JSF application?

I've done some research and I found several options listed below:
1.Use JSF AJAX components like JBOSS RichFaces
2. Use Client JavaScript Library like DOJO
3. Use JavaScript directly
My question is what is the best way to do that?
And for approach 2, is it possible to mingle DOJO and JSF ?
Thanks a million for your answers.

If you can't wait for JSF 2 GA or don't want to use beta, look at project Dynamic Faces. It looks like JSF 2 AJAX support was based on the Dynamic Faces project, so it should be easy to switch from DynaFaces to JSF 2.

What is the best way to be able to run certain websites that aren't supported by safari, firefox, and chrome, in other words only internet explorer?

I really need to do a class online but it wont save progress because it is not supported by safari and only works with internet explorer. What is the best way around this?

Try this with Safari ...
From the Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar again click Develop > User Agent
Try IE 9, 8, or 7.
An alternative is to create a partition on the Mac hard drive and install Windows using Boot Camp but that is a long and drawn out process and you would need to purchase an Window install disc.
Other ideas here > The best way to run Windows on your Mac | Macworld

What's the best way to get a Signature Visa ? apply or CLI ?

I have a 2012 Bank America Cash Rewards Visa Platinum Card that i've successfully removed the $39 annual fee and had it changed to Better Balance Rewards as of last year because i was only earning $50 cash back on my Cash Rewards and figured i could be earning $125 a year having the Better Balance Rewards nstead so i made the switch. Better Balance Rewards usually comes in a Mastercard but they kept it Visa when they changed it from Cash Rewards to BBR. The only thing i did not like was because it was the first credit card it sits at a low $500. When i hand it to the cashier at starbucks (because of their BankAmeriDeals 10% Cash Back using your BankAmerica Card) I am embarrass because it's not ''Signature Visa'' makes me feel and look like i may have ''bad'' credit or just carrying a secured card. When i tried asking if i can be upgrded to a signature visa they said my card does not qualify and need to hard pull my credit report.for a credit limit increas to $5,000. The problem is would i be better off applying for Bank America Signature Visa (preqalified on their site) then i get $100 cash back when i spend $500 in 90 days. Then could they roll over my cash rewards credit line to Better Balance Rewards and close 2015 Cash Rewards ? or would i be better using my ''hard inquiry'' for either US bank cash+ or Chase Sapphire Preferred ? because i know US Bank may be inquiry sensitive and i was planning applying either those 2 in the fall but did not want my inquir from Bank Ameroca get in the way. BTW, my Freedom is signature Visa. Capital One EO would not convert my Capital One Quicksilver Mastercard to Signature visa either. Said i need apply for a Signature Visa and then close the Mastercard which would be stupid since its also one of the longest accounts opened with Bank America. Capital One was $500 but they now allow you combine your cards which was how i got it from $500 to $5,000 without a hard inquiry though unlike Bank America trying to do. So my question is what's the best way getting your cards upgraded to a Signature Visa when its costing you a hard inquiry ? apply it or increase it ? or would you rather use your hard inquiry somewhre else and just not use your non signature visa useless $500 limit card ? What i want ? i want my Bank America $500 limit up with my rest of my portfolio cards and upgraded to signature visa WITHOUT a hard inquiry but they won't do it without a hard inquiry which i wanted to save for adding chase sapphire signature visa and or US bank Cash+ signature visa to my portfolio in the fall so it seems if i want to do this its going to cost me 2 if not 3 hard inquires instead of just 1, i currently have 24 inquiries but 0 in the last 6 months. I been a good boy until next black friday thank you

SebastianZzzzz wrote:
I have a 2012 Bank America Cash Rewards Visa Platinum Card that i've successfully removed the $39 annual fee and had it changed to Better Balance Rewards as of last year because i was only earning $50 cash back on my Cash Rewards and figured i could be earning $125 a year having the Better Balance Rewards nstead so i made the switch. Better Balance Rewards usually comes in a Mastercard but they kept it Visa when they changed it from Cash Rewards to BBR. The only thing i did not like was because it was the first credit card it sits at a low $500. When i hand it to the cashier at starbucks (because of their BankAmeriDeals 10% Cash Back using your BankAmerica Card) I am embarrass because it's not ''Signature Visa'' makes me feel and look like i may have ''bad'' credit or just carrying a secured card. When i tried asking if i can be upgrded to a signature visa they said my card does not qualify and need to hard pull my credit report.for a credit limit increas to $5,000. The problem is would i be better off applying for Bank America Signature Visa (preqalified on their site) then i get $100 cash back when i spend $500 in 90 days. Then could they roll over my cash rewards credit line to Better Balance Rewards and close 2015 Cash Rewards ? or would i be better using my ''hard inquiry'' for either US bank cash+ or Chase Sapphire Preferred ? because i know US Bank may be inquiry sensitive and i was planning applying either those 2 in the fall but did not want my inquir from Bank Ameroca get in the way. BTW, my Freedom is signature Visa. Capital One EO would not convert my Capital One Quicksilver Mastercard to Signature visa either. Said i need apply for a Signature Visa and then close the Mastercard which would be stupid since its also one of the longest accounts opened with Bank America. Capital One was $500 but they now allow you combine your cards which was how i got it from $500 to $5,000 without a hard inquiry though unlike Bank America trying to do. So my question is what's the best way getting your cards upgraded to a Signature Visa when its costing you a hard inquiry ? apply it or increase it ? or would you rather use your hard inquiry somewhre else and just not use your non signature visa useless $500 limit card ? What i want ? i want my Bank America $500 limit up with my rest of my portfolio cards and upgraded to signature visa WITHOUT a hard inquiry but they won't do it without a hard inquiry which i wanted to save for adding chase sapphire signature visa and or US bank Cash+ signature visa to my portfolio in the fall so it seems if i want to do this its going to cost me 2 if not 3 hard inquires instead of just 1, i currently have 24 inquiries but 0 in the last 6 months. I been a good boy until next black friday thank you Good work on removing the annual fee and a successful product change/conversion! I understand your frustration with low limits. AMEX started me off at $1,000 a few years ago and it's slowly grown since then. No need to be ashamed about not having a VISA Signature. Most cashiers aren't looking that closely and most people outside of this forum don't obsess over credit cards. If you're trying to protect your AAoA, then by all means call BOA and ask to talk with a credit analyst (or call the backdoor directy). Request a CLI to your desired amount ($5000 or more). In my experience BOA has been great with CLIs. Good luck! If you're not concerned about your AAoA, then consider which card fits your needs and spending habits: CSP or Cash+. From what I understand, the Cash+ is a difficult card to obtain (often involving manual review). I love my CSP (it's more a travel card), but Chase is stingy with CLIs. I've read here that Chase tends to give bigger limits on second cards. So, since you already have a Freedom Signature, perhaps you'll get a decent CL if you apply for the CSP. Good luck!

What is the best way to keep your macbook pro in tip top condition. performance wise

What is the best way to keep the performance of a macbook pro in tip top shape. Over the years my computer seems to act like a pc with all of its hicups and lockups.
I am running mountain lion and this computer is approx 2 years old.
Not sure if there is some sort of software that will help with this or is there something else I can do.
Thanks
GAJ

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.
5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
6. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A computing device is not something you should have to think about very much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that is always whining for your attention like a neurotic dog, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

What is the best way to apply Support Pack Stacks among satellite systems

Similar Messages

Maybe you are looking for