What is the best way to configure AE for use as a wireless bridge?

I am using an AE to provide airtunes to my living room receiver as well as getting internet connection to my living room PC. The way I have it set up is that I am connecting to my existing wireless network (provided by a dlink dir-655) and then plug in the minijack for airtunes and plug in ethernet cable between AE and PC. I don't have a wireless card in the PC so that's why I connect via ethernet cable/AE.
The problem is that the speed with the AE connected PC when it comes to the web, is quite slow. Many times Youtube just freezes and sometimes never catches back up.
I've checked speeds with speedtest.net and my speeds fluctuate an extreme amount.
Is there a way I should configure the AE better to act as a bridge for my ethernet/AE connected PC?
BTW, I'm only about 25 feet from the dlink wireless router so connection quality should be fine. As both devices support N, I think things should work better!
any suggestions?
Thanks

The newer 802.11n version of the AirPort Express offer an option to configure the base station as a wireless Ethernet bridge. Again, Apple calls this ProxySTA. You configure for a ProxySTA by having the base station join an existing wireless network AND by enabling the "Allow Ethernet Clients" option, located on the Wireless tab within the AirPort Utility.
My point is that, as a ProxySTA, the Express will NOT extend the wireless range of your D-Link router. Instead, it WILL allow wired clients to connect to its Ethernet port for network/Internet access.
In the manual setup settings, I see that there is a wireless setting to extend a wireless network and to participate in a WDS network. Would either of these two be better for what I'm trying to accomplish?
In this scenario, no ... as a WDS would not work because very few non-Apple routers are WDS-compatible. Most likely, your D-Link is not as well ... so your current configuration is the only option for what you are trying to do.
It seems that this current configuration should be rock solid, but perhaps I'm not using the proper setup.
The #1 problem with a ProxySTA is that it does not provide the highest level of bandwidth performance. Typically, for the AXn, the best-to-worst performance would be the following configurations: 1) Wired-to-wireless, 2) Wireless-to-wireless (WDS), and 3) Wireless-to-wired (ProxySTA)
As you can see, the first option would be the best, but it would require that you connect the AXn directly to the D-Link by Ethernet ... which, of course, would tie-up its only Ethernet port so that you could not connect the PC to it as you require.

Similar Messages

What's the Best Way to Learn Java for Use in LiveCycle?

Clearly knowing Java scripting would be a boon for flexibility, but I know nothing of Java. Is there an easy dummies manual for using it with LiveCycle?
I have been relying alot on FormCalc to get things done so far.
Thanks.

A very small note. You may see this as being picky, but I hope it will
help you find the infomation you seek more accurately.
You are not using Java. Java is a different language - so Googling for
Java information will just leave you lost. You are using a language
called JavaScript, always named in full.
Now, the really confusing thing is that JavaScript in a browser,
JavaScript in Acrobat and JavaScript in LiveCycle Designer (again,
sorry, note the full name: there are many other LiveCycle products)
are all different.
A key thing is to have the JavaScript Reference. This is not good for
learning from but it's like having a dictionary: you can't learn a
language from it, but you will always need to look things up. This
forum can help send you in the right direction into the documentation.
Aandi Inston

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

What is the best way to configure storage device for rac?

Hi
On my disk array i have 7mirors and two conroler, what is the best way to configure environment?
My application is OLTP, it runs 6-20 o clocj, so i can do backup when nobady work
Database 10g r2, Windows 2003 enterpise
for examlep
First controler
disks 1-5 DATA
second cotnroler
disks 6-7 FLASH
or meyby share one disk on DATA and FLASH?
Thanks in advice

The best is you use ASM (maybe you do it already) and put one failure group on the first disk array and the second failure group on the second array. Then you can ASM let do the work.
Werner

What is the best way to configure password in Cisco IOS?

I am running IOS 15.2(4) on a 1921 Router
What is the best way to configure the password for the router? I have already tried once and managed to lock myself out of another switch. I would like to use the most secure method which encrypts the password.
Current Config:
username admin privilege 15 password 0 cisco123

Cisco IOS will not let me use a type 5 password. This is the error message I receive:
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
I tried generating an MD5 hash and inputting that in and that did not work either. When I do not specify type 5 it will default to using an encrypted type 4 password.
Also, what is the difference between these two enable secret commands?
enable secret 5 password
username admin privilege 15 secret 5 password

What is the best way to format Videos for ipod touch?

What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
Mpeg streamclip-free. Works great, has presets or can customize the output.

What is the best way to create space for a Yosemite download?

What are the best ways to create space for the download of Yosemite. I can't install it as I don't have enough space.

Did you empty Trash? Very important!
How much space do you have available? Click in the HDD icon on the desktop, COMMAND+I.
Also try a Safe Boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
That will temporarily create some additional space.
Ciao.

What is the best way to manage multiple ipods using the same itunes?

Hi Everyone
i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
Cheers
Liv

If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
Your question as posed was:
What is the best way to manage multiple iPods using the same iTunes {library}?
in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
tt2

What's the best way to prevent KDE from using pulseaudio?

What's the best way to prevent KDE from using pulseaudio if it is required to be installed for gnome?

KDE system Settings > Mulitmedia (in Hardware category) > Audio and Video options > Audio Playback
the default device shown there is the pulseaudio device, move it to the bottom of the list
Check all sub entries under Audio Playback to make sure they all have default at the bottom.
This SHOULD make KDE sound subsystem use the real hardware directly through Alsa instead of pulseaudio.

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

What is the best way to configure my time capsule if I just want to use it for storage?

I have a time capsule that I just want to use as backup storage - I don't need it for accessing the internet. What is the best way to set it up? I just tried and it seems to override my normal internet WLAN, which isn't what I want. If I re-insate the existing WLAN, presumably the backup won't happen automatically on the time capsule. Any insights very welcome!!
Dave

To work as a backup location the TC has to be part of the existing network.
The best way to achieve that is to plug the TC into the existing modem router and put it in bridge mode.
Apple lately have tried to force people to use the TC as the main router.. and the setup via airport utility pushes you in that direction but it is wrong.
You bridge it and use it as storage.. that is fine.. Simply turn off the wireless if you prefer to use the existing wireless, although for Macs the TC will often work better and you can pick up internet through it at the same time.
With access by wireless you cannot have two separate networks. If you try to do that, then you will have one connection with internet and no backup.. and another connection for backup with no internet and be forced to swap between the two.. do not do this!!
You can even setup wireless as roaming.. so same name and security and password as your existing modem router.. and allow the computer to determine which is the best signal to join.

What is the best way to organize pictures for huge library?

Hello.
I have lost 3 evenings of work the last week after the corruption of the iPhoto database. I lose my temper now . it was not the first time. but I’m ready to take long term action to improve the situation.
I have now around 15.000 pics & something like 15 Go of data. That means I have to use an external drive to store them all. Each team the connection between the external HD & my iBook is lost, not often but can happen, the database is bugged. Of course I gonna have more and more pictures in the future, I took 5.000 Go of pictures back from Australia.
My question is very general, what is the best way to handle this kind of database size?
Okay, now I know that I should bake-up the Library6.iPhoto file. What else?
Could I archive my rolls on CDs (well I should do it anyway) & delete the rolls from the database afterwards? What about the photo album? Is it possible to restore the pictures from the CDs to the hard drive?
I have read that I should create several libraries. That could be a solution. Is it possible to split the current one? I could import the pictures in a new library, but in this case I will lose the comments field.
I would really appreciate if you could send me your feedback about handling this size of library. Thanks in advance.

Arnaud:
There's is a way you can have your library on your boot drive and keep the "source" files on the external. It's using iPhoto in it's alias mode. There are pluses and minuses to this system. The pluses are that you can have a very large library. I have 18,000+ photos in my alias library. The iPhoto Library folder on my boot drive is only 1.7MB while the source files on my external HD take up 27G.
The minuses are 1: if the external HD is not mounted then you can only view the thumbnail files and any full sized files that have been edited (the edited version is saved to the iPhoto Library folder). Any operation that requires moving a thumbnail or using the full sized version can't be run. 2: if you delete a photo from your library the "source" file does not get deleted. You'll have to do that via the Finder. 3: When you add new files it's best if you put them in their own folder with the other source folders and then import. If you try to put them in another folder it you'll have to import them manually instead of just dragging the entire new folder into iPhoto to create a new roll.
I've created some Tutorials to help users convert and use this type of library. It's not for everyone but may hold some pluses for your situation.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.8) QT 7.1.3, 22 LCD, 200 & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

What is the best way to create videos for my website?

Hi,
I'm a public speaking coach in Sydeny Australia. I've started a blog and want to include videos to my newsletter subscribers. I do not want to use YouTube, because I want to only share these videos to people on my list.
What is the best way / program to create good videos for my customers? I think I might need to upload these videos to my server and only share the links...? Any suggestions welcome.
Thank you
Trevor Ambrose
http://www.changingtools.com

Trevor:
This may be more information than you asked for, but here goes:
Get a Samsung S10 Video camera (under $400) and a Zoom H4n Professional audio recorder. Get Adobe Production Premium CS5. The camera shoots 1920 x 1080 square pixel in a better quality than a $6000 Panasonic P2 from 4 years ago. The downside, the audio from the Samsung is poor. That's why I recommend the Zoom H4n. On the Premiere timeline, you simply align the waveform of the video with the higher quality wave from the H4n. You can buy a medium sized fold up greenscreen and place any background behind your talent. CS5 has Ultra built in, so you can easily key out the green right on the Premiere timeline revealing a nice background of your choice.
I would design a web page based upon your current website's look and feel that will be a template for your videos. You export your finished video from the Premiere timeline as an f4v. I would recommend 16x9 widescreen and use the Flash preset of "Web Large Widescreen". You can also specify a "Fullscreen" button on the video's controller. The quality is so good that the video will look good even when your client watches it full screen. You import the video into Flash CS5 using the same document dimensions as your video size. You create a Flash template and "Publish" your Flash movie TO your template. Then all that is necessary is to upload all of the associated Web ready files to your server via FTP or Dreamweaver. This workflow streamlines the process and saves hours of fiddling around.
As far as the Web page goes that has your video, give the pages an HTML name like; vid0096hvc.html and use the Robots No Follow tag:
<META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW">
This is the next best thing to having a client log-in and works in a setting where people aren't paying
to see the video, but you still don't want them plastered all over the internet.

What is the best way to configure my iPods and user accounts?

I'm looking for a little guidance. Here is my situation:
I am running the latest version of Tiger. It is currently configured with three accounts; mine is the admin. account and each of my two children have their own accounts.
My account is the one that is used most of the time. All of our calendars in iCal are maintained here including one for each of the kids. Each of the kids has their own Contacts list in the Address Book as well. I currently have a 5G 30GB iPod Video that I sync with iTunes through this account. Shortly, I will be buying an iPod Touch. I want my 30 GB iPod to be the one that has everything on it; it will be the one we take in the car on trips for music. I want the Touch to have some, but not necessarily all, of my music and all of our calendars and contact information. I am looking to use it to replace my Palm as my PDA.
My son has a 2G Nano which currently syncs through his account.
My daughter will be getting a 3G Nano soon.
I will also be upgrading to Leopard very soon.
Ultimately, I would like each of the kids to have their own iTunes libraries for music and podcasts and to sync their iCal calendars. As I understand it, however, they cannot access their calendars from their own accounts under my current arrangement. I also understand that there are several ways to configure my Mac to work with multiple iPods.
Given all of this, what is the best thing for me to do? Should I set up all of the kids' iPods to sync through the admin. account so they can get their calendars at the same time? Or is their some way for them to have access to their calendar information from their own accounts under Tiger (or Leopard)? And as far as my two iPods (the Video and the Touch), should they sync through separate libraries, or through one using playlists. I also want to minimize duplicate data wherever possible, be it music or records in iCal and the Address Book.
Thanks in advance for any suggestions or advice!

Anyone...anyone? Bueller...Bueller?

What is the best way to configure AE for use as a wireless bridge?

Similar Messages

Maybe you are looking for