What is the best way to conserve energy during night time hours?

Hello. Is it best to put the iMac into Sleep mode or Shutdown mode during night time hours in order to conserve energy? Thanks for any guidance on this. I normally just put it to Sleep but wonder if this is the best way? Thanks.

Visit:
Apple - Environment - Reports
Here are the figures for a new iMac 21.5 inch:
It could be argued that if everyone in the world with an iMac saved the 0.93 W (1.36 - 0.43) by turning the iMac off rather than sleeping it, there would be a big saving. But if an individual wanted to save energy, a better approach would be to turn a light bulb off or turn the heating down by a degree.

Similar Messages

What is the best way to switch off Daylight Saving Time?

What is the best way to switch off Daylight Saving Time for a DST enabled timezone?

I've been looking through the related classes and can't seem to find a way to disable DST in any timezone. Probably because they couldn't think of a good reason to want to know what the non-DST time was during DST.
However, you could easily compute the time without DST if that's what you need.

What is the best way to captue current date and time?

I got a field in table to capute current date and time...i am
using SQL Server.
field name datatype length
enter_datetime datetime 8
What is the best way to get current date and time and insert
to table?.
Is this way?.
<cfset curtime = 'dateformat(#now()#,'mm/dd/yyyy')&"
"&timeformat(#now()#,'hh:mm:ss')'>
This way looks like time is not entered correctly.
or any other better way?.

> get current date and time and insert to table?
You can use cfqueryparam
<cfqueryparam value="#now()#"
cfsqltype="cf_sql_timestamp">
Or as was suggested, set the default for your table column to
getdate(). Then you won't have to insert anything. Sql server will
do it automatically when a new record is created.

What is the best way to backup Mavericks other than Time Machine?

I use Time Machine, but I would like to find a good backup program for backing up to an external RAID storage device.

I don't know if it will work with an external RAID (but I imagine so), but Carbon Copy Cloner is a good backup program. You can configure it to backup whatever you want and it can be scheduled quite exhaustively.

What is the best way to handle .mod files in premiere pro cs4?

I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
Thanks.

I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
I noticed a couple different interesting statements:
posted by mmontgomery:
In the case of .MOD, you are actually getting a MPEG-2 file. The way
video files work is that there is a codec (COmpressor/DECompressor)
algorithm and a file wrapper (or extension). A JVC .MOD file is a
MPEG-2 encoded file, with a .MOD extension.
You're faced with two
challenges, first the .MOD file type is only recognized and support by a
few applications. I think we covered some of those already. The
interesting thing about wrappers and extensions is that they can be
dealt with in a variety of ways. Sometimes all you need to do to convert
the video file to a compatible video file is to change the extension.
In the case of .MOD files that's not enough. The .MOD wrapper apparently
does a few more things than just bare a unique extension name. It
requires a slightly more complicated method to convert that file. That
is why there is supplied software and that certain third party
applications have .MOD support.
(posted 2 years ago)
This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
However, another user said:
posted by futball8:
I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
the .MOD files as .MPG and then import into PP CS3. It takes a small
amount of time to conform the audio, but no file conversion is
necessary. It's a pretty slick workflow and I've never encountered any
problems editing them this way.
(posted 5 months ago)
One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
That said, there seems to be a couple of different real solutions to this problem that I have found:
1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
posted by macksgarage:
While Elements 'supports' these files, it is markedly unstable and frequently crashes while using the files, though the application is otherwise reliable. The solution I have arrived at is to repair the container using ffmpeg. (see #3)
(posted 5 months ago)
2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
posted by macksgarae:
If you are not familiar with ffmpeg, it may be a bit of a bear to
learn, but it's not only useful for this, but functions as a video swiss
army knife useful for splicing, muxing/demuxing, and rendering just
about any format into just about any other format.
ffmpeg is an open source project from the linux world, but it has
been ported and is supported on windows. Fetch it here and place it somewhere handy
on your system.
To rewrite the container into a nice, standards compliant .mpg file
that doesn't make applications die, WITHOUT rerendering video or audio
itself, I use this command.
ffmpeg -i INFILE.MOD -acodec copy - vcodec copy OUTFILE.mpg
This not only renames the file, but actually rebuilds the container
around unmodified video and audio data, yielding a file which works much
more stably with Adobe applications, and presumably others as well, as
ffmpeg's open source development goals result in very standards
compliant files.
(posted 5 months ago)
Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better?

What's the best way to save battery life on ios 7

What's the best way to save battery life on ios 7

Turn off services that you are using, e.g., bluetooth, cellular data, etc.
See also here:
https://www.apple.com/batteries/ipad.html
http://ipod.about.com/od/ipad/a/conserve-ipad-battery-life.htm
http://www.ibtimes.com/apple-ios-7-release-15-ways-improve-battery-life-your-iph one-or-ipad-1413218

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

HT1349 I lost/had my iPhone stolen. Tried using Find My iPhone and it's offline. It was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.

Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526

What is the best way to read and manipulate large data in excel files and show them in Sharepoint

Hi ,
I have a large excel file that has 700,000 records in it. The excel file has a few columns that change every day.
What is the best way to read the data form the excel file in fastest and most efficient way.
2 nd Problem,
I have one excel file that has many rows each row contain some data that has certain keywords.
What I want is to segregate the data of rows into respective sheets(tabs ) in the workbook.
for example in rows have following data
1. Alfa
2beta
3 gama
4beta
5gama
6gama
7alfa
in excel
I want there to be 3 tabs now with each of the key words alfa beta and gamma.

Hi,
I don't really see any better options for SharePoint. SharePoint use other production called 'Office Web App' to allow users to view/edit Microsoft Office documents (word, excel etc.). But the web version of excel doesn't support that much records as well
as there's size limitations (probably the default max size is 10MB).
Regarding second problem, I think you need some custom solutions (like a SharePoint timer job/webpart ) to read and present data.
However, if you can reduce the excel file records to something near 16k (which is supported rows in web version of excel) then you can use SharePoint Excel service to refresh data automatically in the excel file in SharePoint from some external sources.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Custom Report : What is the best way ?

Hi!
My customer doesn't like native TestStand 's report layout. He would prefer something like the example enclosed to this post.
What is the best way to achieve this ?
XSL customizing (seems heavy work) ?
Using the report generation toolkit and a Word template ?
Any other idea ?
Attachments:
Report Style.JPG ‏115 KB

Have you examined all of the examples found in the TestStand help:

I have an old 30" apple cinema display (2005) I want to use as a 2nd monitor to a new iMac (2012). I don't just want mirror image of iMac; what's the best way to do this?

I have not bought the iMac yet but will do so very soon and just want to make sure I have what I need to get everything setup including adding the old faithful 2005 30" cinema display. Currently I am driving the old 30" cinema display with a macbook pro also purchased 2005 and happy to say I got a lot of good miles out of this rig. What's the best way to connect the old 30" monitor as a second display for the new generation iMacs?
Other Questions
I can find online new in unopened box a 2012 iMac 27" i7 with 1T Fusion Drive for $1899 no sales tax. This seems like a pretty good deal since I notice the same is available from Apple refurbished for $100 more plus sales tax. I know that they say the Fusion drive is a lot faster on 2013 models but some of the speed tests I reviewed online showed the 2012 i7 and 2013 i7 very close on speed for both storage and processing. Any thoughts?
I don't like changing batteries so I would buy a separate Apple keyboard with numeric pad since it only comes with wireless keyboard. I'm a trackpad enthusiast having been using my macbook pro trackpad with current set up; and I am prepared to buy the Apple trackpad and replace batteries every 2 months but I would greatly prefer USB connection and rechargeable trackpact. I know Logitech makes one so if anyone is using and knows how it compares to Apple's I'm all ears.

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?

I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
Facts:
In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
Thanks in advance for any help!

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

What is the best way to open a HTTPS connection?

What is the best way to open a HTTPS connection and retrieve the content as XML? This is how most of the online API is done nowadays, how can this be done on the iphone SDK?
Thanks

Have a look at the SeismicXML example that comes with the iPhone SDK. It uses http instead of https but it may work for you.
You can also look at the NSURLRequest and NSURLConnection classes.
Enjoy.

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

What is the best way to conserve energy during night time hours?

Similar Messages

Maybe you are looking for