What is the best way to create additional storage AND backup a laptop, as well as the storage?
Beyond being seriously annoyed at an Apple Employee recommended we go the NAS route at an Apple Store no less—only to find it doesn't work for storage OR Time Machine backups of iPhoto (after spending weeks organizing/transferring date, outside of a good deal of coin)—we are now perplexed as how to set up/store based on our needs.
Goals
Create additional storage (iPhoto, iTunes, documents) for the family laptop
Accessible by anyone/device on the home network (iPad, mini iPad, iPhones, etc..)
Would prefer the ability to access this offsite as well
Backup of the laptop
Backup of the storage HD
Ensure we do not lose iPhoto libraries data/files
Here is what I am thinking—need to know if it will work.
Purchase two HDs
Plug them into my base station
Allocate one HD @2T for storage (additional iPhoto libraries, home movies, iTunes libraries, etc...)
Partition the second HD @3T to handle two Time Machine backups
(a) Time Machine of the laptop (up to 1T of backups)
(b) Time Machine of the first HD (up to 2T of backups) - Is this possible?
What I need to know is
Is it possible to partition a HD to Time Machine two backups from different sources—one being a HD?
If this is not a good solution—what is? I am pulling my hair out trying to figure out how to deal with a lot of data related to iPhoto due to the formatting limitations there.
While most do not advocate mixing Time Machine backups with other files, I have 3 Time Capsules with files and backups on the same partition and have never had a problem despite doing it for many years. All 3 Time Capsule are set up as NAS devices.
One Time Capsule holds the Snow Leopard partition backup of two computers. The other two each have a backup of the Mountain Lion partition of two computers. Time Machine is set up to alternate between the devices, which it can now do. On these 2 Time Capsules is a copy of the iTunes Library and a copy of the iPhotos Library, which provides a backup for the two. Every so often I manually copy the new files from the primary iTunes/iPhotos library to the backup on the other Time Capsule.
If the computer is on, I can access the computer from my iPad and then access the hard drives and the files.
Hopefully, I have been able to make this clear.
Similar Messages
-
What is the best way to create E-Flyers and insert to Microsoft Outlook??
What is the best way to create E-Flyers and insert to Microsoft Outlook??
http://kb.mailchimp.com/article/how-to-code-html-emails
Once created, the HTML document cab be placed in the Stationery folder.
On a PC it's here.
"C:\Program Files\Common Files\Microsoft Shared\Stationery" -
What is the best way of creating a one-time backup using DPM 2012R2?
Hello,
Due to some severe tape issues, we have lost a lot of our long-term storage data.
I schedule a recovery point on our servers every Friday, once a week. We retain this data for the 64 weeks (the maximum amount of versions DPM allows.)
Management needs me to put one recovery point from each month to tape (preferably from the beginning of each month.)
From the DPM console, I have been manually searching each server and running a recovery job from each "short term" recovery point we still have in the system. I am recovering this data to a large disk array that I'm using as a staging
area. My intention is to take this data and put it onto tape using DPM and leave it there forever (20 years.)
Since the space on the array is limited, I can only recover a few months at a time before having to delete the recoevered data to make way for the next group.
The way DPM works it seems you must have a protection group for every backup job you run; so if I have to repeat this process 8 times, I'll end up with 8 different protection groups all assigned to the host running the staging array. NOTE:
the host running the staging array will be wiped in the near future.
What would be the best method to carry this task out ?
This forum post is similar, but doesn't address all these additional groups created:
https://social.technet.microsoft.com/Forums/en-US/f379740c-4507-4a82-b275-c95e3e968b57/dpm-2012-r2-perform-one-time-backup?forum=dataprotectionmanager
Any assistance would be welcome!
Matthew J. FazioHi,
What you can do is protect the staging server by using a single share - lets call it STAGING for simplicity.
Perform your first set a restores and restore to the staging share, you can create meaningful subdirectories one for each data source you are restoring.
Now protect the STAGING share using DPM - protect using long term to tape only, Frequency yearly, and set retention policy for 20 years.
Perform an ad-hoc backup (right-click the data source and create recovery point to tape)
When that completes, delete the sub-directories under the staging share and then repeat the process of restoring more data then backing up the same share. When you are all done, you can remove the protection group, but maintain the tape backups
so they will be available for restores.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
What is the best way to create a search help in wen dynpro java?
Hi experts,
In web dynpro java I want to create a search help which could guide user to search a job (also a position and a organizational unit) just like in transaction ppome. So which technique could be the best way to reach that quickly and simply?
Thanks!HI,
Refer the following links.
EVS Valuehelp
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/391ee590-0201-0010-1c89-f1193a886421
Web Dynpro Valuehelp
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e038cf90-0201-0010-0a9a-ec69262a1564
sample application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cf40cf90-0201-0010-4a85-e5a207b900d8 -
What is the best way to create space for a Yosemite download?
What are the best ways to create space for the download of Yosemite. I can't install it as I don't have enough space.
Did you empty Trash? Very important!
How much space do you have available? Click in the HDD icon on the desktop, COMMAND+I.
Also try a Safe Boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
That will temporarily create some additional space.
Ciao. -
What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?
I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated. -
What is the best way to create business documents in CRM
Hi All,
What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
Please help.Ashim,
Try looking at the program:
CRM_TEST_ORDER_MAINTAIN
I think that should help you figure out the parameters.
Good luck,
Stephen -
What is the best way to create a database schema from XML
What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# furtherHi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
What is the best way to create CRUD datagrids
What is the best way to create CRUD datagrids that tell CF
components to update sql tables. I find that I'm having to vreate
all these columns with custom properites and its a bit of a chore:
<mx:DataGridColumn id = "NatWest" dataField="NatWest"
headerText="NatWest" editable="false"
wordWrap="true"
textAlign="right"
headerStyleName="centered"
labelFunction="price_labelFuncNatWest"
sortCompareFunction="price_sortCompareFunc">
I don't really want to use any wizards as I want control over
my code.Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
What is the best way to create a read more/collapse text box on the homepage of a site?
What is the best way to create a read more/collapse text box on the homepage of a site?
I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"
-
What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).
Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application. -
What is the best way to create Aperture book from Pages '09 document?
What is the best way to create Aperture book from Pages '09 document?
There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos. -
What is the best way to create the layout for a single page website in Adobe Muse?
I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?
I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
Demo Website -
dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au -
What is the best way to create a website on a imac g5 (2005)
After reading a variety of reviews of Life 08 I want to know
what the best way to create a website. Should I buy ilife 08
or do something else? There is no iweb on my g5.If you are a novice then iweb is a good place to start. It will allow you to create a site quickly with the minimum amount of work. You can then learn more as you go along if you want to. To publish you will need web space somewhere. Thats how I started and now I am studying web design with the Open University and am learning xhtml and CSS, then progressing to Java etc. Good luck and have fun - it is quite addictive once you start.
Maybe you are looking for
-
I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computers like the instructions said to but that did nothing. Please tell
-
Where to download Acrobat SDK?
Hello, friends, Where to download Acrobat SDK? I was brought to the download page, http://www.adobe.com/cfusion/entitlement/index.cfm?e=acrobat%5Fsdk Acrobat Developer CenterAcrobat 8.1 SDK Acrobat 8.1 SDK is now available free of charge to all users
-
Sub-Folder View Icons Missing in List View (Finder)
Since upgrading to Lion, the arrows in Finder for viewing sub folders has disappeared from Finder in list view and cover flow. At first, I just figured it was another nice feature of OS X they decided to kill off, but I was looking at my boyfriend's
-
Opening 2 pages from same word processing file side by side
I am new to Macs and not much of a computer user, however is it possible to have my second page of a word processing file open up beside the first page rather than below. I thought viewing 2 pages at once would be a nice benefit of the 20" display? g
-
Hi, I am new to java.Last day Can I cast an arrays in java?For example casting an Object array to a String array or an integer array to a long one.If yes, then what are the rules and restrictions for casting arrays.I tried to google it, but I could n