What is the best way to explain Indesign in a four minute presentation?

I have to give a four minute presentation on a technology (in this case InDesign) in class. How do you cover such a broad technology in four minutes? Suggestions would be great!

You could investigate the problems in trying to reconcile "old" technology of creating physical pages, of a fixed size and without any other interactivity than turning the page, with modern variants where page size is non-existent, interactivity is *expected*, and there is no such thing as a fixed font, font size, or page orientation.
InDesign's original purpose was to create "old" technology books, but recent versions claim to be of use for other media as well. Discuss overlaps and differences.
(For a good look on one of the problematic areas, you can search this forum for the eternal confusion on "what is a pixel, actually?")

Similar Messages

  • What is the best way to throw text in a 5 minute film in final cut pro

    Does anyone know what the fastest way is to put 3d text (like the templates in motion) on a video in final cut pro?

    Use live type, you can do some real nice effects with text. Live type has backgrounds you can use, plus you can add your own which is what I do. Then you can use a live type font or standard type with fades, motion paths, glows and all sorts of neat stuff.

  • What is the best way to work with Word documents in The InDesign CS4???

    I work in Microsoft Word 2007 and all my documents have *.doc format.
    What is the best way to work with Word documents in InDesign CS4???
    David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
    How about pasting RTF or Text Document???
    I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
    So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
    It loks like wasting time. I sthere another way of making such layout???  What kind????

    It's best to place any text.
    You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
    This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
    Peter

  • What is the best way to lay out color-coded Excel data in InDesign?

    I’ve been away from layout for some time. I now need to lay out color-coded Excel data (3 columns, 200 rows) in InDesign 5.5. The data will need to be in alpha order and each row will be color coded, with a color key at the top of the page. What is the best way to lay this out? Should I use the table tool and create a new style for each color that I need to use?
    Thanks for your help.

    I think this will work in CS3.
    Start off by inserting Styles of WEEK, Mon to Friday (as per left)
    Set the Week No. to Bullets and Numbering and insert as per screen shot
    Do the same for Days Monday through to Sunday
    Also set up Monday style NEXT STYLE to be Tuesday
    When you get to Sunday - loop the Styles back to WEEK style.
    Then as per first screen shot you just have to insert RETURNS all the way down to initiate the style.

  • What's the best way to write freehand with InDesign?

    I have a Wacom and want to place some handwriting on my document - what's the best way to do this?

    Try the pen or pencil tools or do it in Photoshop and place it.
    Bob

  • What is the best way for a family to set up apple ID's and icloud?

    My partner and I have separate apple id's and own a mac book, ipad, 2 iphones and apple tv.  What's the best way to set it all up so we can access everything on each device?  Can we merge our ID's into one and transfer all our payments?  We just registered for icloud and used a new shared email address, but still have our separate apple ID's.  We have separate email addresses, calendars and notes that we would prefer to keep separate.  It's really just our itunes purchases, music and photos that we want to be able to share.  Thanks in advance!  Cheers, Nicky

    They will be able to download everything that was bought with their Apple ID. If they all shared an ID then they switched to their own ID they won't be able to use any apps or music bought with another Apple ID. As I explained in my previous response. There is only one way to share apps and content across multiple Apple ID's and that is home share. So, NO there isn't a "Smooth" way to do it.

  • I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

    I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

    @Barbara – What purpose is that PDF for? Print? Web?
    If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
    A final resort to bring down file size is:
    1. Print to PostScript
    2. Distill to PDF
    That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
    I will place the PDF in InDesign, print to PostScript, distill to PDF.
    Uwe

  • What is the best way of dealing with an "implicit coercion" of an array to a sprite?

    Hello everyone!
         With continued help from this forum I am getting closer to having a working program. I look forward to being able to help others like myself once I finish learning the AS3 ropes.
         I will briefly explain what I am trying to achieve and then follow it up with my question.
    Background
         I have created a 12 x 9 random number grid that populates each cell with a corresponding image based on each cell's numeric value. I have also created a shuffle button that randomizes the numbers in the grid. The problem I am running into is getting my button-click event to clear the current images off the grid in order to assign new ones (i.e. deleting the display stack objects in order to place news ones in the same locations).
    Question
         My question is this: what is the best way to handle an implicit coercion from an array to a sprite? I have pasted my entire code below so that you can see how the functions are supposed to work together. My trouble apparently lies with not being able to use an array value with a sprite (the sprite represents the actual arrangement of the grid on the display stack while the array starts out as a number than gets assigned an image which should be passed to the sprite).
    ============================================================================
    package 
    import flash.display.MovieClip;
    import flash.display.DisplayObject;
    import flash.events.MouseEvent;
    import flash.display.Sprite;
    import flash.text.TextField;
    import flash.text.TextFormat;
    import flash.utils.getDefinitionByName;
    public class Blanko extends MovieClip
          // Holds 12*9 grid of cells.
          var grid:Sprite;
          // Holds the shuffle button.
          var shuffleButton:Sprite;
          // Equals 12 columns, 9 rows.
          var cols:int = 12;
          var rows:int = 9;
          // Equals number of cells in grid (108).
          var cells:int = cols * rows;
          // Sets cell width and height to 40 pixels.
          var cellW:int = 40;
          var cellH:int = 40;
          // Holds 108 cell images.
          var imageArray:Array = [];
          // Holds 108 numerical values for the cells in the grid.
          var cellNumbers:Array = [];
          // Constructor calls "generateGrid" and "makeShuffleButton" functions.
          public function Blanko()
               generateGrid();
               makeShuffleButton();
      // Creates and displays the 12*9 grid.
      private function generateGrid():void
           grid = new Sprite;
           var i:int = 0;
           for (i = 0; i < cells; i++)
                cellNumbers.push(i % 9 + 1);
           trace("Before shuffle: ", cellNumbers);
           shuffleCells(cellNumbers);
           trace("After shuffle: ", cellNumbers);
           var _cell:Sprite;
           for (i = 0; i < cells; i++)
                // This next line is where the implicit coercion occurs. "_cell" is a sprite that tries
                   to temporarily equal an array value.
                _cell = drawCells(cellNumbers[i]);
                _cell.x = (i % cols) * cellW;
                _cell.y = (i / cols) * cellH;
                grid.addChild(_cell);
      // Creates a "shuffle" button and adds an on-click mouse event.
      private function makeShuffleButton():void
           var _label:TextField = new TextField();
           _label.autoSize = "center";
           TextField(_label).multiline = TextField(_label).wordWrap = false;
           TextField(_label).defaultTextFormat = new TextFormat("Arial", 11, 0xFFFFFF, "bold");
           _label.text = "SHUFFLE";
           _label.x = 4;
           _label.y = 2;
           shuffleButton = new Sprite();
           shuffleButton.graphics.beginFill(0x484848);
           shuffleButton.graphics.drawRoundRect(0, 0, _label.width + _label.x * 2, _label.height +
                                                _label.y * 2, 10);
           shuffleButton.addChild(_label);
           shuffleButton.buttonMode = shuffleButton.useHandCursor = true;
           shuffleButton.mouseChildren = false;
           shuffleButton.x = grid.x + 30 + grid.width - shuffleButton.width;
           shuffleButton.y = grid.y + grid.height + 10;
           this.addChild(shuffleButton);
           shuffleButton.addEventListener(MouseEvent.CLICK, onShuffleButtonClick);
      // Clears cell images, shuffles their numbers and then assigns them new images.
      private function onShuffleButtonClick():void
       eraseCells();
       shuffleCells(cellNumbers);
       trace("After shuffle: ", cellNumbers);
       for (var i:int = 0; i < cells; i++)
        drawCells(cellNumbers[i]);
      // Removes any existing cell images from the display stack.
      private function eraseCells(): void
       while (imageArray.numChildren > 0)
        imageArray.removeChildAt(0);
      // Shuffles cell numbers (randomizes array).
      private function shuffleCells(_array:Array):void
       var _number:int = 0;
       var _a:int = 0;
       var _b:int = 0;
       var _rand:int = 0;
       for (var i:int = _array.length - 1; i > 0; i--)
        _rand = Math.random() * (i - 1);
        _a = _array[i];
        _b = _array[_rand];
        _array[i] = _b;
        _array[_rand] = _a;
      // Retrieves and assigns a custom image to a cell based on its numerical value.
      private function drawCells(_numeral:int):Array
       var _classRef:Class = Class(getDefinitionByName("skin" + _numeral));
       _classRef.x = 30;
       imageArray.push(_classRef);
       imageArray.addChild(_classRef);
       return imageArray;
    ===========================================================================
         Any help with this is greatly appreciated. Thanks!

    Rothrock,
         Thank you for the reply. Let me address a few things here in the hopes of allowing you (and others) to better understand my reasoning for doing things in this manner (admittedly, there is probably a much better/easier approach to what I am trying to accomplish which is one of the things I hope to learn/discover from these posts).
         The elements inside my "imageArray" are all individual graphics that I had imported, changed their type to movie clips using .Sprite as their base class (instead of .MovieClip) and then saved as classes. The reason I did this was because the classes could then be referenced via "getDefinitionByName" by each cell value that was being passed to it. In this grid every number from 1 to 9 appears randomly 12 times each (making the 108 cells which populate the grid). I did not, at the time (nor do I now), know of a better method to implement for making sure that each image appears in the cell that has the corresponding value (i.e. every time a cell has the value of 8 then the custom graphic/class "skin8" will be assigned to it so that the viewer will be able to see a more aesthetically pleasing numerical representation, that is to say a slightly more fancy looking number with a picture behind it). I was advised to store these images in an array so that I could destroy them when I reshuffle the grid in order to make room for the new images (but I probably messed up the instructions).
         If the "drawCell" function only returns a sprite rather than the image array itself, doesn't that mean that my "eraseCells" function won't be able to delete the array's children as their values weren't first returned to the global variable which my erasing function is accessing?
         As for the function name "drawCells," you have to keep in mind that a) my program has been redesigned in stages as I add new functionality/remove old functionality (such as removing text labels and formatting which were originally in this function) and b) that my program is called "Blanko."
         I will try and attach an Illustrator exported JPG file that contains the image I am using as the class "skin7" just to give you an example of what I'm trying to use as labels (although it won't let me insert it here in this post, so I will try it in the next post).
    Thank you for your help!

  • What is the best way to add external C++ code to LabView 6.1?

    I have various C++ class-based DLL's written with Visual Studio 6.0 and wish
    to create instances of these C++ classes and call their methods in LabView
    6.1. What is the best way to do this?
    It seems based on the little reading I have done that there are two choices:
    1. Wrap the C++ class as a simple COM control and use LabView's COM based
    VIs to create a COM object and access the methods of various interfaces.
    2. Wrap the C++ class methods as C functions and a "constructor" and
    "destructor" C function to create and destroy an instance of the class. Then
    use LabView's DLL call support.
    Which is best? What direction is LabView going to take that better supports
    the notion of C++ class libraries?
    Thanks,
    Te
    rry

    You could also try using a CIN. This is a tool that LabVIEW provides for interfacing with external code.
    The CINTools libraries of LabVIEW allow you to embed compiled C code into a particular Virtual Instrument (VI) using a CIN.
    In order for LabVIEW to be capable of calling compiled functions of C from a running VI, the code must be loaded and unloaded into memory at the same time as the VI code itself. LabVIEW uses object code in the form of a .lsb file which is generated by the C compiler from the C source code using the ntlvsbm.mak file. This ntlvsbm.mak file is included in the CINtools directory in the LabVIEW folder. You also must create another .mak file which includes parameter definitions for the ntlvsbm.mak file and also includes a call to the LabVIEW .mak file.
    The generic documentation for CINs only explains how to use them to call C compiled code from a LabVIEW VI. It shows several development environments such as Visual C++, but in essence it only allows the user to create .lsb files out of plain C source code ( .c ) through C compilers on those environments.
    The question now is how can I create .lsb files from C++ native source code using a C++ compiler. Furthermore, how can I create a .lsb file from several C++ source code files (.cpp) and make calls to C++ functions from a VI using CINs? The following explains how to do this:
    1) Drop a Code Interface Node (from the Advanced Subpalette of the Functions Palette) into the LabVIEW VI. Make sure to wire the inputs.
    2) Right-click on the CIN and choose "Create.c File...", then in the file dialog box specify a "name.cpp" file name. (very important: use .cpp extension)
    3) Then create a name.mak makefile (text file) and add the following lines :
    name=name_of_cpp_file_without_the_extension
    type=CIN
    cinlibraries=Kernel32.lib
    CINTOOLSDIR=path_to_cintools_directory
    !include <$(CINTOOLSDIR)\ntlvsb.mak>
    4) Go into Visual C++ and File>Open and open the .mak file. You can even Add the name.cpp file to the project to make it easier to edit. Select that name.cpp or open it as a text file in NotePad or and edit the prototypes of the CIN MgErr functions as shown below, adding extern "C" at the beginning of the line. extern "C" CIN MgErr CINRun(float64 *INPUT);3) Select Build.exe to create the "name.lsb" file. To import the .lsb into LabVIEW, right-click on the CIN and choose "Load Code Resource...". Then, choose the name.lsb file and it is ready to run!
    If you want to use several C++ source code files with .cpp extensions, then compile them in Visual C++ and link them to name.cpp and create a .lsb by modifying the name.mak as follows:
    name=name_of_cpp_file_without_the_extension
    otherobj=other_cpp_files_BUT_USING_.obj_extension
    type=CIN
    cinlibraries=Kernel32.lib
    CINTOOLSDIR=path_to_cintools_directory
    !include <$(CINTOOLSDIR)\ntlvsbm.mak>
    It's worth a try? I have also heard of using clusters to represent classes, so you could check that out.
    J.R. Allen

  • What is the best way to get a time capsule to work with a new network name?

    What is the best way to get a time capsule to work with a new network name?

    Well it seems that you did not explain to us the full story.  Did you change ISP's or something? Why would it not show up anymore?
    What colour is the light on the time-capsule? If it's blinking amber, then you probably need to do a factory-reset. That should get it to show up again in AirPort Utility.

  • The Best Way to engage InDesign with InCopy

    Hello Mr./Ms.
    I have some question about collaborating between InDesign with InCopy. My question is which one the best way to engage InDesign with InCopy, the way number one or number two?
    Usually, I make assignment first in InDesign, and I put that file (.inca) on a server. So the editor can open the inca file from server. Instead of Editor, I take the incx file from server.
    The Editor directly open Indd File from server, so I'm not necessary to create assignment file.
    I hope someone can help to solve this my problem. Thank you very much for attention.
    note: What server and network requirement for best result InDesign and InCopy workflow?
    Best Regards,
    Bambang Damayanto
    [email protected]

    I respectfully disagree; I think assignments are in most cases (not all) more trouble that they're worth.  For your local work, continue w/INDD files only. It just makes things simpler.
    When an editor wants to work on something off-site, the designer can make an assignment on the fly for them.  It could even be the entire document as one large assignment. Since the stories are already exported, you just need to make the assignment (Create New Assignment from the Assignment panel menu) and the drag/drop the linked stories to that assignment. Other people can still open the INDD file but they won't be able to edit the stories that were packaged for the remote editor.
    AM

  • What is the best way to merge a file content into log file

    What is the best way to merge a file content into log file.
    In worst case, I will read the file line by line as string, then use
    logger.info(lineString)to output to log file.
    However, is there better way to do this?
    The eventual log file will be something like:
    log message 1
    log message 2
    content from file line 1
    content from file line 2
    content from file line 3
    log message 3
    log message 4Thanks

    John618 wrote:
    Thank you and let me explain:
    1. What do you mean by better?
    I would like to see better performance. read line by line and log each line as string can be slow. Did you measure this and determine that it is actually a problem for your application? Or are you guessing?
    Regardless of what you do you are still going to need to read the file.
    >
    2.The only better way I can think of is not having to do it, but I assume you have a very good reason to want to do this.
    Yes, I have to do it beacuse the requirement is to have that file content be part of logging.
    Any idea?How is it supposed to be part of it? For example which of the following is better?
            File AAA - contents
                       First Line
                       Second Line XXX
            Log 1
                    2009-03-27 DEBUG: Random preceding line
                    2009-03-27 DEBUG: First Line
                    2009-03-27 DEBUG: Second Line XXX
                    2009-03-27 DEBUG: Random following line
            Log 2
                    2009-03-27 DEBUG: Random preceding line
                    2009-03-27 DEBUG: ----- File: AAA -------------
                    First Line
                    Second Line XXX
                    2009-03-27 DEBUG: Random following lineBoth of the above have some advantages and disadvantages.
    The first in a mult-threaded app can end up with intermittent log entries in between lines, so having log lines with thread ids becomes important.
    The first can be created by reading one line at a time and posting one at a time.
    The second can be created by reading the entire file as a single string and then posting using a single log statement.

  • What's the best way to output a high quality ready to send to the printer PDF?

    I'm designing a photo book for a friend and we're having output issues. We're working with a professional printer but for some reason our prints keep coming out soft or pixelated. The images are 300 dpi and formatted correctly for an InDesign document so the issue is likely output.
    What's the best way to output the HIGHEST quality PDF you can out of InDesign? Everyone seems to have different answers.
    Thanks in advance!

    Check a couple things.
    One would be for broken links. If there are broken links then ID will use the preview image instead of the linked image.
    Another would be to select an image that prints poorly in the Links Panel and check the effective resolution. If it is below your stated 300 dpi then the image has been enlarged greater than 100%.
    Then just use the PDF/X-4 profile for your PDF.
    Mike

  • What's the best way to save an 8.5 x 11 image for use as a page background in a PDF?

    What's the best way to save an 8.5 x 11 image for use as a page background in a PDF? My goal is to have a relatively small final .pdf file size that includes numerous pages with full 8.5 x 11 images as backgrounds in the document. If I save at 8.5 x 11 and 72dpi (example), the image is not 8.5 x 11, and the quality is not good enough. I need help with size, dpi, and file format to save as before I place it in InDesign and then save as a .pdf.
    Thanks,
    Jim

    Do exactly what I said then.  Create the InDesign document of the required dimension, and chose whether it will be high quality print, or Interactive PDF.  It really doesn't mater what format you bring the image into that document.  It can be JPG, PNG, but I usually use native Photoshop PSD.  The image does have to be of high enough resolution, but it can be many times bigger than iis required for the final export.  (InDesign does not import the image, but rather references it on your hard drive.)
    When you have placed your text and finished your page, then export it to PDF, but go through the tabs chosing suitable settings.  If the image needs to be downsized, InDesign will do that at this stage while building the PDF.
    If you can tell us how this presentation will be made (Projector, overhead projector, printed page etc. or just emailed to the end users) we can help you more with the final output settings. 

  • What is the best way to create a Scheduler app for ALL mobile devices?

    I've used indesign to make apps before, (more like interactive/digital publications) and now I'm trying to make a scheduling app. What's the best way for me to accomplish this since it's a little more intricate? Indesign + DPS?? Any other recommendations?

    Skipping InDesign & using HTML5/something such as Appcelerator's Titanium would be your best bet.
    If you're set on using DPS, however, you'll need to make multiple multi-folio apps, single issue apps aren't supported iPhone or Android. DPS folios are also not responsive, although in some cases renditions will scale to support different devices.

Maybe you are looking for