What is the best way to export a DVCam proyect to DVD Studio Pro?

I always export them as a normal quick time file but you are able to see some digital noise in some shots. What am I doing wrong?

Why,,,oh why I ask? do we export to QT first?
Export your sequence directly to compressor using the highest Mbps you can allow according to the length of your sequence. For example, you can use this formula: 560/minutes of video=bitrate. Let's say you've got a video that is 90 minutes in length---560/90=6.2, so you would compress using a bitrate that averages 6.2 Mbps. What is that you say? your sequence is only 20 min. long? then use the highest bitrate that most DVD players can withstand which is somewhere around 8.0 Mbps, for safety I never go higher than 7.5 Mbps. Use Dolby 2.0 for audio.
THEN BRING IT INTO DVDSP
Good luck

Similar Messages

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

What is the best way to export a cutterline from photoshop?

What is the best way to export a cutterline from photoshop?
Wie exportiere ich am am besten einen Schnittlinie aus Photoshop? Ich bekomme von einem Wort immer nur den ersten Buchstaben exportiert, obwohl alles gerastert auf einer Ebene liegt.
Thank you! Vielen Dank!

What are you talking about exactly?
If you need to export vector data Photoshop is not the first choice but if you have Type Layers (without faux styles), Vector Masks or Paths it is possible.
alles gerastert auf einer Ebene
does not seem to make sense in this context though.

What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
regards,
Nick

What is the best way to export a slideshow .I like to show my slideshows via appleTV on my TV

What is the best way to export a slideshow.I like to view the show trough AppleTV on my television.

You don't really give us a lot of information to work with, and assume we know something about this mdeia player. The only way to get the slideshow to a media player is to export it from iPhoto. To where? Depends on the media player. Will iTunes work? Depends on the media player. Does the media player have a DVD drive? If so, then burning it to DVD with iDVD will work, but it will be standard def not HD.

HT204655 What is the best way to export a photo from OS X Photos to Photoshop?

What is the best way to export a photo from OS X Photos to Photoshop?

Just a note: if you Option-drag the thumbnail to the Desktop you'll get the original file. Regular dragging will get you the preview version or the edited version if it's been edited in Photos.

What is the best way to export a movie to avoid losing quality?

I need to get a movie I made on a DVD somehow, but I seem to loose quality in color and overall sharpness when I take it into iDVD and burn a disc. This movie will be projected very large, so I need the best quality possible. What is the best way to export it for the highest quality?

There's been a ton of testing reported here on this issue, but I don't think there is a consensus on the "best" method. For one thing, it depends on what you're starting with.
In my experience with DV video and hi-res photos, it was tough to beat the result I got exporting "large" to the media browser. (Because of my DV footage, HD was not an option.) This made a H.264 file. I could only get a slight improvement by exporting via Quicktime to a H.264 file at double the resolution of the "large" file made by iMovie. Of course this took longer to export and for iDVD to encode. Overall, I'd say it wasn't worth it for the barely visible improvement. That improvement was only detectable in the slides, BTW, not in the DV video.
Many recommend exporting to AIC, which should be an essentially lossless export out of iMovie. This is what the share to iDVD supposedly does, I got poor results with any flow that used an AIC file exported out of iMovie for use by iDVD. Never figured out why, but my results were always better if I compressed to H.264 on the way out of iMovie.

What is the best way to export for use on internet?

what is the best way to export for use on internet?

It depends. Is this for a personal web site or for a site like YouTube, Vimeo or Facebook?
For YouTube, Vimeo and Facebook, use Publish & Share/Computer/AVCHD using one of the YouTube presets.

I finally was successful in burning a CD of a slideshow I created in iPhoto, however, it is blurry. What is the best way to burn to a CD or DVD for clarity. Also, I realize if burned in iPhoto it will only be playable in iPhoto. Help! This is needed soon!

I finally was successful in burning a CD of a slideshow I created in iPhoto, however, it is blurry. What is the best way to burn to a CD or DVD for clarity. Also, I realize if burned in iPhoto it will only be playable in iPhoto. Help! This is needed soon for a wedding reception!

What version of iPhoto are you using? How do you plan to view the slideshow at the wedding reception, on a TV screen? If so then you will need to send the slideshow to iDVD and burn a disk from there.
If you're in iPhoto 11 and the slideshow was created in the slideshow mode and not from an album, then go to the Share menu and select iDVD. That will create a QT movie of the slideshow and import it into iDVD.
In iDVD select your theme and setup the menu as you'd like. If you want the movie to begin plahying immediately when the disk is inserted into the DVD player go into the Gallery mode and drag the movie into the Autostart bin at the left.
Click to view full size
If you want the movie to loop continuously go to the Advanced menu and select Loop.
Click to view full size
When you're finished setting upb the iDVD project save it as a disk image via the File ➙ Save as Disk Image menu option. This will allow you to check it with DVD Player before tryingto burn to disk. Mount the disk imnage by double clicking on it and launch DVD Player and play. If the movie plays as you want and everything is good you can burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

What's the best way to export for print?

I usually upload images to my local photoprinting shop. What's the best way to do that with Lightroom? Since lightroom does the final sharpening in the print module, how do I get that into the exported file since there is no export function in the print module? Also, how do I get the proper dpi and sizing info into the photo for the print shop? Thanks.

There is no good way to prepare images for printing from a file from a commercial printer by using Lightroom alone. You need to do an export of the image without any resizing or color space conversion, and then use some other program of your choice to 'finish' the file.
It's just plain missing functionality... Lightroom assumes that you will be printing photos yourself and it is missing a whole lot of stuff in order to support external printing, including:
a) Resize to exact pixel dimensions. Many labs require an exact pixel count for a given print size, so for example for an 8x10 they need a 2400 x 3000 pixel image. Can't be done in Lightroom.
b) Trim adjustment. If you are doing full bleed photos (no margin), you might need to provide about 0.05 inch of 'trim space' to compensate for image loss during printing. Can't be done in Lightroom.
c) Exporting to a specific printer profile. Can't be done.
d) Adding margins, text, etc. Many times my clients want a 1/4 inch margin in their photos to facilitate framing, or I put a dim watermark type text in the bottom corner. Can't be done.
My solution. Do most processing in Lightroom, do an export, and then do a second export via qImage on a PC. It does all of the above plus much more. It's just a matter of using the right tool for the job, and LIghtroom has no facilities at all for printing to a file.
I have been asking for "Print to File" ever since I was under NDA during the betas.

What is the best way to export/share GarageBand files with a non-mac user?

I have some GB2 files, too big to email, that I want a client to hear and give direction. then I can make the changes and re-export them for him to hear again. What is the best way to do this? IMac seems to be forthcoming about sharing pictures and IMovies but not music files, for understandable reasons. Thanks.
BB

Here's one way, but be sure you understand the privacy policy!

What is the best way of exporting artboards from Illustrator for use in InDesign?

Hi,
I have an artboard in Illustrator CS6 which contains some text with a scribble effect applied to it. I would like to use this text in an InDesign CS6 document. I am wondering what the best way of exporting/importing this artboard would be so that I get the best quality.
Thanks,
Nick

Save as an AI file with PDF compatibility enabled and the Document Raster Effects set to "High"; then use File>Place in ID.

What si the best way to export Final Cut Pro X movies to YouTube?

Hi
The Share > YouTube tool is proving to be very unrelaible. Often the Share Loader comes back with the "Your password has been rejected" message when I know that the password is correct. It seems to work fine for 50% of the time but it's really frustrating.
My videos are quite large (given that they are all under two minutes they have been shot in HD and are often over 1Gb - too big for YouTube).
What is the best way of getting my movies down in size and then uploaded to YouTube?
Thanks
Stephen

Thanks for the advice guys. I'm just rather reluctant to spend more money when FCP is meant to be good at this kind of thing. It's frsutrating thet the YouTube option doesn't work, but it clearly doesn't.
I think I just need to stop being a scrooge and to buy compressor!
Cheers
Stephen

What's the best way to export a 1280:720 mov file to high res wmv

Does anyone know the best way to export an HD 1280:720 Quick Time .mov to the highest possible res wmv?

fewer problems. It was a codec issue, I think regarding the latest codec. The solution, and it works for all the apps, was to make the frame divisible by 16 on all sides. It had to do with coding factors. But it worked. Since then, and the introduction of the iPad, we've dropped WMV altogether. We're now relying on Flash and MP4. MP4 is used in most places, particularly promos and marketing content. However, it's not at all easy to protect content from "redistribution" when using HTML5. It has a weakness in which it leaves a data trail that someone can follow back to the original video. Hmmm... so we code in a Flash wrapper, though I think my IT person may be using my MP4s for that. I'll have to check. Anyway, I'm down to mostly MP4 now.

What is the best way to put a movie on a DVD?

I want to put my movie on a DVD and show it on the TV. What is the best way to do this?

Yes, you can put more than one movie on a DVD, as long as the total length of both together is not over 2hrs for single-layer DVDs.
I know what you mean about it taking so long for the burning....my DVDs are usually just close to 2hrs, so taking 12-14hrs to burn is not unusual for me. I just do it overnight, and it is finished in the morning. I 'save to disc image' first, and then do the burning from Disk Utility.
Trust me, I've tried everything I can think of to be able to.
I am surprised that you cannot get your movies exported back to DV tapes with your camcorder. I looked up its specs, and it shows it has Firewire port, so you should be able to export. I would pursue this further....
Have you tried saving your movies as QuickTime Full-Quality and then importing that into a new iMovie and exporting that? You will need to have more free space to copy the movie, but once you have made the QT movie, you can delete the original one, and you can delete the QT one after the export. Also, it may take a LOOOONNNGGG time for the compression/process necessary to create the QT movie, and somewhat long for the import into iMovie, but I have found that iMovies that would not export to my camcorder in their original form exported easily after I made the QT one.

What is the best way to export a DVCam proyect to DVD Studio Pro?

Similar Messages

Maybe you are looking for