What is the best way to fix broken vis when the type library of the active x server changes (methods or properties addes)?
Every time there is a change to the active X server I am developing drivers for I have to go back through all the vi's I have developed and re-point the methods an properties back to what they were to fix the broken arrows. The only change in the Active X server is usually an additional method or property. There has to be a better way, I have over 130 vi's I have to fix for every update and it keeps getting larger.
This is somthing I can try, but I don't think it will solve my problem. My reference never changes, it is always the same and is correctly registered with every new release. What does change are the number of methods and properties. With each new release there are usualy additional methods and properties; however, the old ones are still there with the same names (thank goodness). The problem this causes with LabVIEW, apparently, whenever there is a change in the type library you must re-point all the methods an properties again, at least this is what I am experiencing. If doing what you suggested works, it would be some kind of magic that I would like an explanation for.
Similar Messages
-
I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
Like this:
When I play them they're black as well.
Normal Still:
"Missing" Still:
What's with that? What's the best way to fix it?
Thanks.Hi
Magic solution - NO
Some thoughts - YES
Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
Trouble-shooting guide
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
My iPhone 4S will not sync with the music I have selected in iTunes. Has anyone else had this issue and what is the best way to fix it.
Hi,
Setting up syncing
Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
USB syncing
Open iTunes.
Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side. Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
Click Apply, in the lower-right corner of the screen, to sync.
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
Hope this helps -
I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.
WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know
-
What is the best way of insertion using structured or binary type in oracle
what is the best way of insertion using structured or binary type in oracle xml db 11g database
SQL*Loader.
-
Since I believe you can't create a Photo Album (Book) in Apperature, what is the best way to transfer my pictures from my Apperature Library to iPhoto (in order to create my book) without loosing any picture quality ?
Since I believe you can't create a Photo Album (Book) in Apperature, what is the best way to transfer my pictures from my Apperature Library to iPhoto (in order to create my book) without loosing any picture quality ?
Why do you think that? You can create printed Books in Aperture with similar themes as in iPhoto, and with more options to create custom themes on your own.
See this page - http://www.apple.com/aperture/what-is.html - scroll down to see the example books.
But if you prefer the iPhoto themes and layout, you can open your Aperture library in iPhoto, if you have both the current version of iPhoto and Aperture. Simply use the command "File > Open Library in iPhoto" and you can create your book in iPhoto.
And switch back to Aperture by using the command "File > Open Library in Aperture".
See: Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Regards
Léonie -
What would you guys recommend as the best way to fix a darkened image? i.e. - adjust brightness/contrast or gamma levels, etc. I'm sure this changes depending on the image, but just seeing if there's a general rule of thumb. Would it be best to leave the images untouched in premiere and export them to After Effects and adjust the lighting levels there? Thanks for any help.
This tutorial will probably answer your questions:
Tutorial:Correct for overexposed or underexposed video
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
What is a best way to write SQL ?
Sample Case
drop table t;
drop table b;
create table t ( a varchar2(4), b number, c varchar2(1));
insert into t values ('A00', 10, 'R');
insert into t values ('A01', 11, 'R');
insert into t values ('A02', 12, 'R');
insert into t values ('A03', 13, 'R');
insert into t values ('A00', 10, 'P');
insert into t values ('A01', 11, 'P');
insert into t values ('A02', 12, 'P');
insert into t values ('A03', 13, 'P');
commit;
create table b ( j varchar(4), k varchar2(1), l varchar2(5), m number(3), n varchar2(5), o number(3));
insert into b values ('A00', 'P', 'FIXED', 100, 'FLOAT', 60);
insert into b values ('A01', 'P', 'FIXED', 101, 'FIXED', 30);
insert into b values ('A02', 'R', 'FLOAT', 45, 'FLOAT', 72);
insert into b values ('A03', 'R', 'FIXED', 55, 'FLOAT', 53);
commit;
10:19:13 SQL> select * from t;
A B C
A00 10 R
A01 11 R
A02 12 R
A03 13 R
A00 10 P
A01 11 P
A02 12 P
A03 13 P
8 rows selected.
10:19:19 SQL> select * from b;
J K L M N O
A00 P FIXED 100 FLOAT 60
A01 P FIXED 101 FIXED 30
A02 R FLOAT 45 FLOAT 72
A03 R FIXED 55 FLOAT 53
1/ In table t each reference having 2 records one with P another is with R
2/ In table b each refrence merged into single record and there are many records which are not existing in table t
3/ both t and j tables can be joined using a = j
4/ If from table t for a reference indicator is 'P' then if have to pick up l and m columns, if it is 'R' then I have to pick up n and o columns
5/ I want output in following format
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 72
A02 R FLOAT 45
A03 P FLOAT 53
A03 R FIXED 55
6/ Above example is a sample ouput, In above example I have picked up only l,m,n,o columns, but in real example there are many columns ( around 40 ) to be selected. ( using "case when" may not be practical )
Kindly suggest me what is a best way to write SQL ?
thanks & regards
pjpIs this?
select b.j,t.c as k,decode(t.c,'P',l,n) as l,decode(t.c,'P',m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 45
A02 R FLOAT 72
A03 P FIXED 55
A03 R FLOAT 53
8 rows selected.
or is this?
select b.j,t.c as k,decode(t.c,b.k,l,n) as l,decode(t.c,b.k,m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 72
A02 R FLOAT 45
A03 P FLOAT 53
A03 R FIXED 55
8 rows selected. -
Best way to fix dbstart / pfile location mismatch?
I have completed a clean install of Oracle 9iR2 on RH 7.3 with
ORACLE_BASE = /db/oracle
ORACLE_HOME = /db/oracle/product/9.2.0.1.0
During installation I create database instance TEST.
The installation (dbca) creates init file
/db/oracle/admin/test/pfile/inittest.ora.622002131859
BUT $ORACLE_HOME/bin/dbstart looks for the init file
$ORACLE_HOME/dbs/inittest.ora.
I "fixed" this by creating link
ln -s /db/oracle/admin/test/pfile/inittest.ora.622002131859
/db/oracle/product/9.2.0.1.0/dbs/inittest.ora
QUES 1) Is the a known mismatch between the create tools
and dbstart OR is this an indication of something gone wrong in my install?
QUES 2) If known, is this the best way to "fix" this mismatch?
Thanks
R.Parr
Temporal ArtsCongrats for doing a clean install.
Well i tried almost 10 times to install oracle 9.2.0 on RH 7.2, it fails while dbca starts. At last, i did software only install and ran the dbca myself. It worked. However the problem you stated is there in my case too. Hence your assumption that there is a mismatch is true.
I have a rather an irrelevant question rather (since you installed cleanly), I am able to run sqlplus only with the "oracle" and "root" user. Any other user, i get "permission denied". Do you have to run any other scripts to enable other users to access oracle bin files. My email id is [email protected]
Thanks in advance. -
What's he best way to include Adobe PDFs on my blog?
What's he best way to include Adobe PDFs on my blog?
I create worksheets as a teacher and would like to share them from my blog. Currently I am linking to Scribd etc to share PDFs. If I upload the worksheets as an image is there a way to adjust the size/resolution of the PDF for easier viewing?
Thanks!PDFs are just files. Can you upload files to your blog space? If yes, just upload the PDFs then, in a blog entry, provide the web link (URL) for each file (PDF).
Or, place the PDFs into your free acrobat.com "files" storage (5GB free). You have one as you have an Adobe ID (needed to make your post here eh).
https://cloud.acrobat.com/
You can have acrobat.com provide a "share" link to the PDF. Place that into a blog entry.
Or - same idea as above (use a "file share" service) -- Microsoft's OneDrive, Adobe's Creative Cloud, Google drive, DropBox, others ...
Be well... -
I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply?
Did you cause the nick? Or did it just appear one day? There are reports of the retina screen having exploding pixels which leaves a hole in the screen that can be felt when you rub your finger across it. If that is what happened then it should be covered under the warranty. If you caused the nick then it is not covered and the fix will be very expensive, somewhere in the $1000 range.
astets wrote:
I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply? -
I'm running firefox 35.01 on macpro OS 10.7.5 what is th best way to do ftp?
Do you mean '''F'''ile '''T'''ransfer '''P'''rotocol (FTP) ?
Please give more details. -
Best way to import data to multiple tables in oracle d.b from sql server
HI All am newbie to Oracle,
What is the Best way to import data to multiple tables in Oracle Data base from sql server?
1)linked server?
2)ssis ?
If possible share me the query to done this task using Linked server?
Regards,
KoteRavindra.check:
http://www.mssqltips.com/sqlservertip/2011/export-sql-server-data-to-oracle-using-ssis/
koteravindra
Handle: koteravindra
Status Level: Newbie
Registered: Jan 9, 2013
Total Posts: 4
Total Questions: 3 (3 unresolved)
why so many unresolved questions? Remember to close your threads marking them as answered. -
What is the Active Sync functionality? Also, what is the Priority Hub?
What is the Active Sync functionality in the Blackberry Q5?
Also. I would like to know how to make sure that my emails are displayed promptly, i.e., that there is no lag...Would there be some sort of priority setting like the Priority Hub (I wonder what the Priority Hub is)
Thankshttp://en.wikipedia.org/wiki/Exchange_ActiveSync
EAS is the best way to get email along with PIM sync options.
Its push email sort of but with a heart beat to mail server
about Priority hub
http://docs.blackberry.com/en/smartphone_users/deliverables/55574/mwa1372084676021.jsp
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
What are the parameters in Call transaction method?
Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
PrakashProcessing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.
Maybe you are looking for
-
Hello Experts, Is ther any report wher i can get the information of all the Sales Order Header block data or item block. Its not the credit block ...i want only the order which are block due to reason of rejection. Suggest. Thanks Shri..
-
Only source view, no layout view with PS web gallery.
I created a web photo gallery using CS3... When i view the pages in GL CS2 from the gallery, it only shows source code, no layout view. Normally I wouldn't care, however, I have to add links to the jpgs. Is there a way to fix this so I can work with
-
Sir, I would like to use the SUM function in summing the intervals like this statement: SELECT DATE_VALUE, DAY_NAME , SUM(CAST(TIME_OUT as time) - CAST(TIME_IN as time)), EMPLOYEE_ID FROM [table name] WHERE [where clause] GROUP BY DATE_VALUE, DAY_NAM
-
Hello there. I made a disk image with iDVD 6 and when I try to burn it with Disk Utility it just seems to hang and go nonwhere. How do I burn the image in Toast or in any other program? Thanks.
-
Hi All, I want to write a select query where I am passing unicode character and comparing with the Chinese characters in the table. So it is not giving me the correct response. I want to convert the unicode character to chinese character before compa