What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?

What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?
I tried usb modems. They worked ok for 32 bit usb's but Lion only allows 64 bit. I bought one from Best Buy and it works when it wants to. Mostly, it doesn't want to!
Is there a way to connect through a time capsule?

Thanks for that!!
Zoom - 56K V.92 USB Mini External Data/Fax Modem
I didn't look any further than this. I bought this at Best Buy and like I said, it works somesimes. It does not trigger the fax automatically when the phone rings. You need to have it manually answer. In the past, I had the 32 bit Apple version of this external USB modem and it worked without issue.

Similar Messages

What is the best way to hook up my mac mini to my LED flatscreen

I have a Samsung LED flatscrren - what is the best way to hook up a mac mini to it

HDMI cable. Works great no problems so far.

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
In the end I ended up having to power down the iMac.
Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

What's the best way to hook up the a macbook pro to an HDTV?

I want to use my LCD HDTV to color correct and adjust levels. What's the best way to do this? I've never done it before so I'm not sure.
Thanks in advance.
Jordan

You need a way to get the signal out of your Laptop... a Matrox MXO is the least expensive way to do this... you connect it to your DVI port on the MBP, and then from it to the LCD. The LCD will have to either have SDI in, or component analog in for this to work, but it's the least expensive way to do it properly. You can even setup the LCD to broadcast spec with the blue only display of color bars from the Matrox's control panel. Pretty slick actually.
Jerry

What is the best way to hook up my Sony handycam DCR-DVD to my imac?

What is the best way to connect my Sony handycam DCR-DVD301 to my imac computer (Mac OSX 10.6.8)

Firewire, if it has that.

What's the best way to transfer 11,000 photo's from my old mac to my new one?

What's the best way to transfer 11,000 photo's on iphoto to iphoto on my new mac. I've just spent 24 hours importing them onlu for it to say there is not enough space available - BUT I'VE JUST BOUGHT AN NEW UPGRADED MAC?

Don't import them.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

What is the best way to share an entire iPhoto '09 folder with both Mac and PC Users?

What is the best way to share an entire photo folder with lots of photos from iPhoto '09 with both Mac and PC Users?
I got over a 100 photos in just 1 of my photo folders.
I really don't want to have to email these photos individually...
There's gotta be an easier way to share an entire photo folder...

Awesome, thx for clarifying it
I found this related Apple article:
..."If you’re used to right-clicking on a Windows computer, you can use Control-click in a similar way on your Mac."...
http://support.apple.com/kb/PH4537

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

What is the best way to hook up an external monitor? Im having some issues!

Up until now I have been able to use my external monitor while editing. I recently got a 20" HDTV with HDMI and a jack to use it as a computer monitor. I notice that once I set my VIEW option to ALL FRAMES in FCP, it will only show me a frame at a time until I stop the playhead then the shot will pop up wherever I stopped the playhead.
The set up:
I have a Caldigit 4TB Raid that i use for editing. I have a FW800 going from that to my G5 Powermac. I also have a FW400 coming out of the Caldigit to my Sony GVD-1000 MiniDV deck (only using this as a "pass through"). I have S-Video/RCA audio coming out of the Sony to the jacks on the 20" HDTV.
Now I was getting a picture but it was showing me a frame at a time. Now it won't show me anything at all not even on the Sony GVD1000 deck. ALL FRAMES is still set in FCP. I am not sure why I cannot see my work in real time on the other monitor or see it period for that matter.
Device Control is set to FW basic which turns my screen black. However when I select another option other than FW Basic, it turns my screen blue so that right there tells me that the computer is talking to the monitor.
As for Graphics card, I am using the ATI Radeon 9600. Last night I hooked up a custom made DVI to HDMI cable and nothing happened aside from desktop icons completely left the screen. Maybe I need to set it up to Mirror the other screen before I hook that cable up or something. Still doesn't explain my issue with FCP.
I do NOT have a AJA or Matrox breakout box and Im thinking I probably will need that. Perhaps my problem could be everything is digital till the signal gets to the Sony deck, i am coming out that deck with analog signals to the monitor.
Any suggestions?
Before I bought the HDTV, I had a regular SD monitor and never had any issues with seeing my work on it while I edited.
I am working with footage shot in 720p and I am using the correct HD codec to edit with so I am not sure why I cannot view my work on my external monitor.
Thanks!

Your setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.

What is the best way to hook up my Creative Labs Inspire 5.1 sound system to my new iMac?

We recently purchased a 27" iMac and want to use our Creative Labs Inspire 5.1 sound system with it. How do we make this connection to get the most out of the sound system?

BAgodmode wrote:
If I am not mistaken, your 5.1 came with 3 plugs that are meant to go into a regular PC. If that's the case, you should have received a Y like cable, that connects any none channeled sound source, like an iMac, and helps distribute it as 5.1. But they also make a curious USB device to help connect it.
http://us.store.creative.com/Creative-Sound-Blaster-XFi-Surround-5.1/M/B0044DEDC A.htm
An outboard audio device, if you really want to get the max out of your 5.1.
Unfortunately that is a Windows only device:
System Requirements
Minimum System Requirements
Microsoft ® Windows ® 7, Windows Vista ®, Windows XP (Professional x64 Edition, Service Pack 2 or above)
So it won't work.

What is the best way to backup all Photos, Videos, Music, and other documents so that I can basically clean up my laptop? I would like to keep all applications during the "reboot", and I already have an external hard drive.

I have filled up the 500 GB of internal storage on my Mid 2010 laptop, and I have no intentions of getting anything newer. I would like to backup basically everything so that I can pull it off a hard drive as needed, but I am worried if I "reboot" my laptop, I'll lose all files and applications.

You say that you already have an external hard drive? Of what capacity? With some libraries, it's simply a matter of dragging and dropping them to copy them to an external drive (such as videos, etc.). But you want to be a bit careful about moving your iTunes Library so you won't lose the links to your music (see -> http://support.apple.com/kb/ht1449 and http://support.apple.com/kb/ht1751) and photos (see -> http://support.apple.com/kb/HT1229?viewlocale=en_US).
Once you've established that your relocated Libraries are still functioning and that you've copied your movies, you can delete these items from your internal drive. You could, if you wanted, invest in a larger internal drive so that you could always have your data stored so that you can take it with you, of course.
But if you safely move all of your files to an external, you can trash the originals and make space on your internal drive.
Clinton

What is the best way to encode and compress?

I just finished an hour and a half long video of comedians performing. The client wants this to be put on dvd so he can mass produce it. What is the best way to compress this and encode it? Should I buy compressor or can I do it in handbrake? What are the best best settings to make sure it doesnt lose quality? Please advise...

You should be able to get up to 2 hours at least.
The best way is to export as a Master File and drop it into iDVD, Toast or some other DVD authoring app.

What is the best way to stack DAQ aquired data in labview?

I'm developing an application to work with an M-series daq card and labview 8.5 to output a signal and then record on 8 differential inputs for a short period of time (~10 ms). I need to stack my data, however, because the incoming signal will be very, very small, even after amplification. So basically i'm running a slightly modified version of the multifunction Synch AI-AO.vi (included with the install of daqmx). What is the best way for me to rerun this vi a set number of times and add new data directly to the old data (not cat-ing or anything, like |sample 1 of run 1| + |sample 1 of run 2| = stacked stample 1).
A slightly modified version of the mutlifunction synch AI-AO.vi is attached.
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏143 KB

Hi LSU,
see attachment on how to "stack" several measurements. I simply add the waveforms and use a shift register to keep the last iterations value.
Writing to files in each iteration is extremly CPU consuming - especially with express vis. Using for loops for just one iteration is "senseless". You could enable the conditional terminal of the for loop to realize your stop feature.
For your message 4:
Have you ever tried all the things you asked for? Sometimes it's easiest to just try&error
And for the "n=n+x" question: It really helps to take the free online courses offered by NI!
Message Edited by GerdW on 11-11-2009 06:27 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏128 KB

What is the best way to restore the entire contents of Mac HD?

After installing Snow Leopard my iMovie 6 project went haywire. As I found that others had the same problem, I backed up Mac HD with TM, and then re-installed Leopard using the erase procedure. After that I couldn't access my TM backups via TM, so I copied it to the Mac HD folder. This didn't work out too well, as I had to manually restore various applications and libraries. I then found out you can access the backups via TM by pressing Control, click. So I deleted almost all the files I copied and I'm ready to re-install the entire folder Mac HD via TM. Now it asks me for a folder's name or to create a new folder. I can restore it to the existing Mac HD folder, as a separate folder within it, but then it will be like the previous attempt I made to copy it. What is the best way to do it? Should I create a new Mac HD folder and try to delete the one that came with Leopard? Can it be done like that? Any help will be appreciated.

I posted my question prematurely. I should have read the manual first. I did contact Apple Support, and they walked me through the restore process - it's so simple if you know what you are doing that it is embarrassing. I just didn't know where the Utilities section was - it was right there in the top bar. So now I have my computer the way I like it. I guess Snow Leopard is not for me until they fix iMovie 6.

What is the best way to transfer data from a PC to an iMac?

What is the best way to transfer data from a PC to an iMac?

If you know how to set up a computer-to-computer Ethernet network, then you can give that a try, but a hard drive will be faster than Ethernet unless you don't have a lot to transfer.
Mac OS X 10.6 Help- Creating a computer-to-computer network

What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?

Similar Messages

Maybe you are looking for