What is the best way to hookup my airport extreme with my time capsule ?

what is the best way to hookup my airport extreme with my time capsule ?

It sounds like you have the AirPort Extreme configured as the "main" router on your network.
If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
Power up the Time Capsule
Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule, then click Manual Setup
Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
Click the Internet icon, the click the Internet tab
Insure that the setting for Connect Using = Ethernet
Insure that the setting for Connection Sharing = Off (Bridge Mode)
Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
Then power cycle the entire network by powering everything off....order of power down does not matter
Wait a minute
Power up the modem first, and let it run a few minutes by itself
Power up the AirPort Extreme next and let it run a full minute
Power up the Time Capsule next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
Open System Preference (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backups or Use Disk and backups should begin again in a few minutes
If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

Similar Messages

What is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things don't work or aren't supported these days. can't update my iphone, download video, etc. can i get the latest software? thanks.Ask your question.

what is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things are not supported these days. can't download software, update my iphone, download video, etc. can i get the latest software? thanks for the help!

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

What is the best way to get dirty my hand with office 365

what is the best way to get dirty my hand with office 365
Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com

Hi,
Just create an evaluation tenate and get your hands Dirty! Or if you are a partner to Microsoft, you can register yourself at
http://portal.fasttrack.office.com and then you can create sites from there. If you need tenant with data, use
http://microsoftcie.com and create a tenant, then you will have your own contoso to play with! :)
Regards
Henrik A. Halmstrand
sharepointrevealed.com
getspconfig.codeplex.com
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
Thanks for any help

Hi Donavan,
There are two options for zeroing with the NI-9237. You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
See the Bridge Balancing, Offset Nulling section in the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements. See the above tutorial to consider the tradeoff in accuracy between these two options.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

What is the best way to reconcile gl account postings with pay results ?

Hi experts
what is the best way to reconcile gl account postings with pay results ?
is it running wage type reporter ?
or is there any otehr way .. i have variances in wtr n gl posting for a few employees.
Regards

Hi,
Match Payroll Journal (PC00_M40_LJN - Payroll Journal ) with Wage type Report.(PC00_M99_CWTR - Wage Type Reporter )
Finally verify the Posting amount (PCP0) with Payroll Journal....(PC00_M40_LJN - Payroll Journal )
This should solve your issue...
Regards,
Veeram

HT4436 What is the best way to set up business accounts with multiple ipads?

What is the best way to set up business accounts with multiple ipads?

Here are three different methods >
How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
This article > iOS: How to transfer or sync content to your computer, http://support.apple.com/kb/HT1296
suggests using contacts groups.
When syncing contacts, you can choose to sync all of your contacts or only selected groups.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
You can set up groups in the Address Book application.
If you are all going to use the same iTunes apps library, turn off "Automatically sync new apps" in the apps tab just below the list of apps. Then you won't get new apps on your device unless you select them.

What's the best way to create/stitch panorama photos with Aperture?

What's the best way to create/stitch panorama photos with Aperture?
Many thanks
Best

There is no way to do this with Aperture. This thread
https://discussions.apple.com/thread/3714693?start=0&tstart=0
has some suggestions.

What is the best way to install an Airport to a G5?

Hi. My G5 came without a built in Airport card. I've recently bought an Airport Extreme. What is the best way to install an Airport to a G5? Should I buy the Airport card from ebay or some other retailer & do the installation myself OR should I buy it & get somebody professional to install it?

Hello ajdoyle78. Welcome to the Apple Discussions!
The April 2005 and earlier Power Mac G5s are compatible with the AirPort Extreme card. The later Power Mac G5s (models: M9590LL/A, M9591LL/A, M9592LL/A) are not. Instead, these models require a special combo AirPort/Bluetooth card which must be installed by an Apple Authorized Service Provider (AASP).

What is the best way to control a mac mini with iphone 4s , prefer blue tooth

Hi
what is the best way to control a mac mini with iphone 4s , prefer blue tooth, or I can use the syncing cable as well. but no wifi.
Basically to lanch an app and load a preset for that app.
Thank you

As V.K. noted, check out NetRestore's documentation http://www.bombich.com/software/docs/netrestore/English/index.html or visit the fourms at http://forums.bombich.com/

What is the best way to organize music by artist with various artist...

What is the best way in iTunes 7 to organize my music by an artist who has several songs that have appearances by other artist? I now have about 400 Artist, in my artist list.
1-Most of them are by the same Artist but with people who appear on their album as a special guest. What is the best solution for this?
2-The same Artist appear on someone else's album what is the best solutions for this? I would like to have as few categories as possible.
When I have a track with 2 artist, how will iTunes handle both Artist or do I have to determine? If I choose 1 Artist, does this mean that when I search for the 2nd Artist that the track would not be found. Please help me. I want to fix my Library so I can back it up.

Do you mean the Artist and the Album
Artist fields?
There is the Artist field. This is for the
artist(s) doing the song.
There is the Album Artist field. This is for
who's album it is.
If there are featured artists on a song, I usually
take them out of the Artist field and put it
after the song title.
"Smooth" - Santana featuring Rob Thomas becomes
"Smooth featuring Rob Thomas" - Santana.
This way I don't end up with a bunch of different
artists showing up in the Artists column.
That wwas exactly what I was talking about.

What is the best way to link 4 Airport units together wirelessly?

Hi guys,
I have a home with tick walls and creating a decent wireless network was always a challenge. Recently I’ve decided to go for Apple products since I had a 4th gen airport express that worked well for airplay.
I bought a new time capsule, airport extreme, and one airport express. So in total I have 4 apple devices that I can use for creating a good wireless network. But what I found out is that having a full signal doesn’t mean that you will have good speeds, and speeds are really slow like 3Mb/s max on some places on the house.
The way that everything is configured at the moment is that I’ve configured the time capsule to be the main router and with the other three I’ve spreaded them over my house and selected the option to extend a wireless network using Airport Utility 6.2 on OSX.
What is strange that I have a full signal on almost all corners but very bad speeds. I did some research and found a tool that would show what the less crowded channel that you can choose for you wireless network (http://tools.meraki.com/stumbler)
In all my experience of extending a wireless network I’ve always used routers with DD-WRT so I could select the router to be a repeater bridge (and have two distinct networks, with different names) or link the routers with WDS linking them using the MAC address. In both cases all the documentation I’ve read recommended to set all routers of the same network with the same channel.
When I used the stumbler tool to see what channel my network was, since it was set as automatic because it’s the recommendation of Apple documentation, I found out that all 4 routers were operating on different channel on both 2.4Ghz frequencies and 5Ghz frequencies.
What is strange with the wireless network is that sometimes when it is really slow the speed of the internet, if I disconnect from the wireless network and connect again it gets a better connection, like I was connection to a closer router. But after sometime speeds get crappy again, like it changed to the far router again.
My question is, what is the best way to link all this routers together wirelessly? Is there a way to make them to be all on the same channel? Is that important?
On the Airport Utility 6.2 I don’t see any field that would make possible to link this routers using WDS. On the internet I found some documentation for configuring the routers with WDS with the Airport Utility 5.6.
All my routers are updated to the latest version (7.6.3). Please let me know how to proceed to have a decent network on my house. I wouldn’t mind having the network set with different SSIDs but it would be better to use the same network name on all the house.
Thanks in advance,
Tiago

At the moment it is configured like this.
[IMG]http://img254.imageshack.us/img254/6403/capturadetela20130210s2.png[/IMG]
My problem is that the signal its strong but speed isn’t. On Wifi stumbler I saw that every router is set to be on a different channel, they had to be the same no?
If its really slow if I disconnect and connect again from the network. It gets faster, like it connected to a closer router or something.
All are set to extend a wireless network.
Regards,
T

HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

What's the best way to sample multiple AI's with different sampling rates under one task?

I'm using a PCI-6221 card and CVI 7.1.
I have a tri-axis vibration sensor and two other pressure transducers.
I want to take 10k samples from each vibration axis at 80 kHz. This is
possible by configuring the scan rate of the "vibration task" to 240
kHz. (The card maximum is 250 kHz).
I want to take 1k samples from each pressure transducer at 250 kHz. This happens very infrequently.
Each measurement is required by a separate task.
I thought I could do this by setting up three finite tasks (1
vibration, 2 pressure), but DAQmx won't let me run more than one AI
task at a time. I've read other posts here, and I realize I have to
add/remove physical channels on-demand.
What is the best way to optimize this setup so that I'm not hogging up system resources?
Should I do the following?
1. Stop the task
2. Remove the vibration channels from the task
3. Add in a pressure channel
4. Configure the pressure channel
5. Start the task
6. Take the pressure samples
7. Stop the task
8. Remove the pressure channel from the task
9. Add in the vibration channels
10. Configure the vibration channels
11. Start the task
Also, the vibration portion is running in finite mode, but I'm looping
it. Should I switch it to continuous and run the "DAQmxReadAnalogF64"
to sample the latest 10k samples. (If the task is continuous, would I
pull the latest 10k samples, or would I pull some old buffered samples
instead?)
Thank you,
Nobody

Hello Nobody,
If you configure your task timing to acquire a finite number of
samples, then you can only read the number of samples that you
specified in your configuration. Once you try to read more
samples, you will receive the error you are seeing.
If you configure your task timing for continuous acquisition,k then you
can read samples indefinitely. Any given DAQmx Read will read the
oldest unread samples in the buffer.
If you are going to be switching between different tasks, you will definitely need to stop one before you start the other one.
I hope this helps!
Eric
DE For Life!

What is the best way to Sync Digital Output(TTL) with Analog Output?

I am trying to generate Analog waveform that synchronize the rising edge of a digital signal(TTL). The ttl will be used as trigger for camera. The board I have is USB-6343X. In my draft, I used a clock as ttl so I can tune frequency easily. Could any one tell me what's the best way to accomplish such task? My draft seems working, but I hope there's more neat way. Thanks in advance for any help!
Kind regards,
Eric

Hi Econg,
You should be able to trigger your TTL output with the analog output by using the ao/StartTrigger as your trigger source on the counter task. You wouldn't have to have the extra Get Full Terminal Name.vi in your analog output task.
Here is an example using your modified code. You will have to change the cDAQ1/ao/StartTigger to *your device*/ao/StartTrigger, but it should then trigger the counter output at the exact time when the analog output starts.

What is the best way to export/share GarageBand files with a non-mac user?

I have some GB2 files, too big to email, that I want a client to hear and give direction. then I can make the changes and re-export them for him to hear again. What is the best way to do this? IMac seems to be forthcoming about sharing pictures and IMovies but not music files, for understandable reasons. Thanks.
BB

Here's one way, but be sure you understand the privacy policy!

What is the best way to hookup my airport extreme with my time capsule ?

Similar Messages

Maybe you are looking for