What is the best way to keep the battery built-in last longer?

what is the best way to keep the battery built-in in macbook pro last longer???..
is it by plugged in as many times as we can..and discharge it to 80-90% a week..then charged it back?

My favorite tip for longer battery life: Uninstall Flash

Similar Messages

  • I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. What is the best way to keep the files in these machines synchronized?

    I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?

    How did you transfer the files to the iMac.  If you exported the files out of the MB library using Kind = Current you should get the edited version.  Any other  option may not.
    If you want to keep the two libraries "synced"  any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode,  Transferring files between two computers using FireWire, with WiFi. and use the paid version of  iPhoto Library Manager to copy that album from the MB library to iMac library.  It will also copy the original and edited versions, keywords, titles, etc.
    OT

  • What and how is the best way to keep the battery strong?

    Im new to owning a Macbook Pro and I was wondering how to make sure the battery stays strong?

    No: draining to near 0% is not advisable. It's best to charge recharging at 20%:
    http://arstechnica.com/gadgets/2014/04/ask-ars-the-best-way-to-use-a-lithium-ion -battery-redux/
    For the rest: use it as you please. But don't forget to use the battery every now and then.

  • What is the best way to keep the block diagram/ front panel clean?

    Hello,
    I am relatively new to Labview so I'm not able to tell if I'm overcomplicating my programs or making my block diagram too cluttered. I was wondering if there were some ways to tell whether I could simplify my programming just by looking at it (perhaps only experience helps for these things) ? 
    I have attached my VI here. Currently, it has the capability to monitor the voltage and current from two motors. On display, you can see a indicator with the voltage and current values and there are charts toward the bottom that can display waveforms from different motors with a drop down menu. 
    The front panel is rather clean in my novice opinion, but the block diagram seems messy to me, just at first glance. I foresee a problem occuring in the future however. In the future, I will have to scale the VI to monitor 50 motors. All the programming will be the same as the one I have now, except it will have 50 indicators and unfortunately 50 times pretty much everything. I would like to avoid this, but I'm not sure how I could.
    I am using a USB 6009. I am using its four differential inputs to monitor the voltage and current of two motors. In the future, I will be getting more DAQ units (25 total because 2 motors can be monitored for each DAQ). The new DAQs will help will help with more resource space, but I think complicate things with the additional potential of 24 more DAQ Assistants (as used in my code). 
    Thanks for any help you might be able to provide!

    It usually is mainly experience that will teach you the best methods to make your code look pretty. I don't know anyone who is proud of their first from-scratch application. There are a few resources out there to help with best practices, like this group on ni.com, but you'll learn the most from your own development.
    Your front panel looks great. FPs in general are really up to you. You can make it look as ugly or pretty as you want. When you have some duplicate controls and indicator groups, you should utilize clusters and arrays to simplify. You could use a little bit of cleanup in that regard, but not much. Also, personally, I hate reading red text unless it's a warning of some sort.
    Your block diagram could use some cleanup in a modularity sense. You have a lot of repeated code, which you could consolidate in to a subVI that is used in multiple locations, or in a For loop. A general rule of thumb is to keep your block diagram within a single monitor. You shouldn't have to scroll. Your application is pretty simple, so it's hard to mess it up
    Here are some specifics about your block diagram:
    Right click your terminals on the block diagram and uncheck "View As Icon". You're welcome.
    Duplicate operations on each waveform "(x*2-4)/16": create subVI and/or run the waveforms through a For loop.
    You do a lot of 2-element arrays and then indexing. Just replace those with a Select node based on the numeric.
    All of your code is running every time, including your property nodes at the bottom, which is unnecessary. As you learn LabVIEW architectures, you will learn how to bypass this with initialization and exiting code, but for now you should put a case structure around those for only when the motor numbers change.
    I'm not sure how you're timing your main loop, but you should put a delay in there because you don't need the DAQmx node to be pulling as fast as your CPU will allow.
    There are free intro videos you can watch to learn what NI would suggest in terms of coding and teach you some of the basic features and such. Here's a three hour course, and here's a six hour course.

  • What is the best way to keep the Aluminum clean?

    Hi guys, just wondering what you are using to clean the shiny macbook pro? Eventually the notebook does get a little dirty do to oil from skin, sweat etc.
    do you just use a little water and a cloth or is there a safe product to use?
    thank you in advance!

    Also, the same way you would clean an LCD....
    To clean the LCD:
    1. Turn off the computer or display. You may need to turn off the computer in order to turn off some Apple displays.
    2. Dampen a clean, soft, lint-free cloth or paper with water only.
    3. Wipe the screen. Do not spray liquid directly on the screen.
    http://docs.info.apple.com/article.html?artnum=60446

  • Please Advise On The Best Way To Keep Your Battery Healthy And Not Deformed

    I am a black macbook (mb) user and have had my mb for 37 months now. after a year and a half, my battery (the first one) was deformed and i was advised to replace it quickly. i was also advised to calibrate my battery occasionally and so i did after that. but in just over a year after i replaced my battery, it is starting to deform and swollen. i have been following the advice and calibrated my battery as advised. my battery is still in normal condition according to the system profiler.
    when i first bought my macbook, i was told NOT TO keep recharging my battery whenever i used it and the battery drains because this would make the battery's life shorter. i was also told it is OKAY to have the power plugged in. and so i did that. but it turned out that my battery had deformed from it. most probably from the heat but i don't know.
    i use my macbook regularly. i keep it switched on almost 24 hours a day and i keep it well ventilated (i sit it on top of iLap) because i have my internet on 24 hours a day and use the internet regularly. i am not planning to replace my battery just yet even though the battery capacity has gone down to 77%. it's expensive here. i will keep on continuing with the calibrating every now and then. now it might be the magsafe's problem that the battery is deforming too soon. one time, the magsafe fell from my bed onto the floor quite hard. and since then it wasn't working properly. sometimes it heats up and it becomes too hot to hold for long. at times the battery would say 0:00 (time left charging) but the light doesn't change to green so i have to plug it out from my mb and from the main plug and rest it for about 10 seconds and then it runs as normal. i know i probably need to change the adapter soon.
    anyway, i'm just asking. for someone who uses his mb regularly or everyday and almost 24 hours a day, what is your best advice on how to keep the battery healthy and in good condition for a long period of time?
    sorry for the rambling but thank you.

    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    Battery University

  • What is the best way to keep the PB awake?

    I have usb externals drives and an ipod. When I backup my hard drive or when I charge an ipod I get the message that the device was removed improperly because the computer went to sleep. Should I use a screen saver? What settings should I use?
    Thanks for any info.
    Barb

    I've had the same problem, and I've been using a piece of freeware called "caffeine." It's worked really well for me so far.
    http://lightheadsw.com/caffeine/
    15" Hi-res PowerBook   Mac OS X (10.4.9)   1.67 GHz, 2x512MB RAM, 100GB 7200RPM HD

  • What is the best way to keep your macbook pro in tip top condition. performance wise

    What is the best way to keep the performance of a macbook pro in tip top shape.  Over the years my computer seems to act like a pc with all of its hicups and lockups.
    I am running mountain lion and this computer is approx 2 years old.
    Not sure if there is some sort of software that will help with this or is there something else I can do.
    Thanks
    GAJ

    How to maintain a Mac
    1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
    2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
    Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
    It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.
    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
    Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction.  Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
    4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.
    5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.
    There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    6. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
    While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
    7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A computing device is not something you should have to think about very much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that is always whining for your attention like a neurotic dog, use a PC.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • What is the best way to keep my personal files stored in iCloud separate from my work-related files?

    What is the best way to keep my personal files stored in iCloud separate from my work-related files? It seems that I'm not allowed to link my iPad mini and my work iMac using two different accounts, so I'm wondering how to make my single personal account work for both, while keeping personal vs work files reasonably separated.
    Thanks for any suggestions.

    Is it possible for you to upgrade your account to iCloud Drive? That would mean, all Macs upgraded to Yosemite, and all mobile devices to iOS8?
    See:  iCloud Drive FAQ and iCloud: About using iWork for iOS and iCloud
    In iCloud Drive you could create two separate custom folders, one for work documents and one for private documents and organize your documents there.  Don't use the app specific folders (Keynote, Pages, Numbers, ...) , because you can only create one level of folders inside these folders.

  • What is the best way to keep your files organised

    I would like to know what is the best way to keep your file organise when I am
    Loading program's like numbers and pages from iPhone to MacBook i alway 
    Get double of the same work sheet

    I would like to know what is the best way to keep your file organise when I am
    Loading program's like numbers and pages from iPhone to MacBook i alway 
    Get double of the same work sheet

  • What is the best way to keep my retina screen clean?

    What is the best way to keep my retina screen clean?

    I use Windex Electronics Cleaner on the MBP displays.  I spray some on a small microfiber cloth and wipe the display.  Then I use a large microfiber cloth to dry it.  When finished, the display looks like the day it came out of the box.
    http://www.windex.com/en-US/Products/Pages/electronic-cleaner-and-wipes.aspx
    DO NOT CONFUSE THIS WITH ORDINARY WINDEX WINDOW CLEANER!
    Ciao.

  • I just switched from pc to mac.  what is the best way to keep Windows?  Parallel or Boot camp?

    I have just switched from pc to mac.  What is the best way to keep Windows, Parallel of Boot camp?

    Parallels should be able to handle that without any problems.
    There is a version of both of those that will run on the Mac. So you might consider upgrading to that version instead of going with Windows on your Mac.
    Allan

  • I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

    I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • What is the best way to mimic the data from production to other server?

    Hi,
    here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
    I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
    Thanks a lot.....

    RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.

  • How is the best way of keeping your macbook pro battery healthy

    what is the best way of keeping your macbook pro battery healthy there are so many ways what is the best way?

    Read these two Apppe articles:
    http://http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    I generally keep my MBP connected to AC as much as possible and try to make certain that at least monthly I run it on the battery to about the 40% charge level.
    Ciao.

Maybe you are looking for