What is the best way to leave the mini for the night?

What is the best way to switch off the ipod mini when I have finished with it?
My usual way to finish is to press the pause button then press the hold button. Is this safe?
I have heard that holding the pause/play button does a similar thing.
Any input is greatfully received.
Thanks.

I do the same thing. Press and hold pause until it sleeps and then switch hold on so I don't wake it up by accident. If you gasp don't use it for a couple of days it will go into deep sleep, and when you wake it up it will show the apple symbol... I think it is essentially rebooting.
I'm pretty sure the iPod normally just goes to sleep, rather than shuts down. This uses a little more power, but makes it faster when you go to use it (rather than waiting for it to boot up... like when you leave it for a few days). I think it's a reasonable compromise... give up a little battery life for that instant sweet tune gratification! And if you don't use it... it shuts down to preserve your battery. Smart pod!
Anyway, don't worry about it, what you are doing is perfectly safe for your iPod.

Similar Messages

What is the best way to erase my computer for personal stuff while leaving the computer ready to use

what is the best way to erase my computer for personal stuff while leaving the computer ready to use

If the Mac came with Mountain Lion or Lion, press Command, Option and R keys on boot, open Disk Utility, erase the disk and reinstall Lion or Mountain Lion. If it came with Snow Leopard or older, insert the DVD, press C key on boot, go to Utilities > Disk Utility, erase the drive and reinstall Snow Leopard

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

What is the best way to reformat a mini and reinstall Mavericks

What is the best way to reformat a mini and reinstall Mavericks?

Hi ruthefrombenson!
This article can help you erase your hard drive and reinstall Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/

The best way to make proxy files for editing?

Hi,
What is the best way to create proxy files for editing? I'm thinking Apple ProRes 422 (Proxy). The original material is DVCPRO HD 1080i50, shot on Panasonic P2 cards, and copied on to hard drives. But as there is about 400 hours of it, I desperately need to find a clever way to make smaller proxy files for editing.
I would also like to make the proxies at a smaller resolution than 1080i for the editing process.
I guess it's possible to import the media and then batch export it to the proxy format, but Is there a better way?

I'm not able to ingest the material directly from the P2-folders as ProRes 422 (Proxy). No matter how much I change the import settings in "Log and transfer", it still ingests as DVCPRO HD 1080i50.
Correct. DVCPRO HD P2 can only come in as DVCPRO HD. You can't transcode it. AVCIntra P2 is what you can bring in as ProRes. (Sorry Tom).
I can of course transcode it form there to the proxy format and delete the ingested files,
Why? Why do that? You have ingested all the files, right? You ALREADY HAVE THEM...right? Why not work with them? You obviously have the room (20TB). Why import all this, then now take the days it would require to make proxies?
Making the ProRes-proxies directly from the P2-material seems more logical, or isn't it?
DVCPRO HD P2 cannot come in as anything else, so the offline/online workflow for them doesn't work unless you import it all, then transcode to a smaller format...but then need to keep the originals online to relink to when you are done. If you wanted to do an offline/online, you needed to research this better...or test it...before you shot your hundreds of hours only to find that what you want to do won't work.
Shane

What's he best way to include Adobe PDFs on my blog?

What's he best way to include Adobe PDFs on my blog?
I create worksheets as a teacher and would like to share them from my blog. Currently I am linking to Scribd etc to share PDFs. If I upload the worksheets as an image is there a way to adjust the size/resolution of the PDF for easier viewing?
Thanks!

PDFs are just files. Can you upload files to your blog space? If yes, just upload the PDFs then, in a blog entry, provide the web link (URL) for each file (PDF).
Or, place the PDFs into your free acrobat.com "files" storage (5GB free). You have one as you have an Adobe ID (needed to make your post here eh).
https://cloud.acrobat.com/
You can have acrobat.com provide a "share" link to the PDF. Place that into a blog entry.
Or - same idea as above (use a "file share" service) -- Microsoft's OneDrive, Adobe's Creative Cloud, Google drive, DropBox, others ...
Be well...

What is a best way to write SQL ?

Sample Case
drop table t;
drop table b;
create table t ( a varchar2(4), b number, c varchar2(1));
insert into t values ('A00', 10, 'R');
insert into t values ('A01', 11, 'R');
insert into t values ('A02', 12, 'R');
insert into t values ('A03', 13, 'R');
insert into t values ('A00', 10, 'P');
insert into t values ('A01', 11, 'P');
insert into t values ('A02', 12, 'P');
insert into t values ('A03', 13, 'P');
commit;
create table b ( j varchar(4), k varchar2(1), l varchar2(5), m number(3), n varchar2(5), o number(3));
insert into b values ('A00', 'P', 'FIXED', 100, 'FLOAT', 60);
insert into b values ('A01', 'P', 'FIXED', 101, 'FIXED', 30);
insert into b values ('A02', 'R', 'FLOAT', 45, 'FLOAT', 72);
insert into b values ('A03', 'R', 'FIXED', 55, 'FLOAT', 53);
commit;
10:19:13 SQL> select * from t;
A B C
A00 10 R
A01 11 R
A02 12 R
A03 13 R
A00 10 P
A01 11 P
A02 12 P
A03 13 P
8 rows selected.
10:19:19 SQL> select * from b;
J K L M N O
A00 P FIXED 100 FLOAT 60
A01 P FIXED 101 FIXED 30
A02 R FLOAT 45 FLOAT 72
A03 R FIXED 55 FLOAT 53
1/     In table t each reference having 2 records one with P another is with R
2/     In table b each refrence merged into single record and there are many records which are not existing in table t
3/      both t and j tables can be joined using a = j
4/     If from table t for a reference indicator is 'P' then if have to pick up l and m columns, if it is 'R' then I have to pick up n and o columns
5/     I want output in following format
A00     P     FIXED          100
A00     R     FLOAT          60
A01     P     FIXED          101
A01     R     FIXED          30
A02     P     FLOAT          72
A02     R     FLOAT          45
A03     P     FLOAT          53
A03     R     FIXED          55
6/     Above example is a sample ouput, In above example I have picked up only l,m,n,o columns, but in real example there are many columns ( around 40 ) to be selected. ( using "case when" may not be practical )
Kindly suggest me what is a best way to write SQL ?
thanks & regards
pjp

Is this?
select b.j,t.c as k,decode(t.c,'P',l,n) as l,decode(t.c,'P',m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 45
A02 R FLOAT 72
A03 P FIXED 55
A03 R FLOAT 53
8 rows selected.
or is this?
select b.j,t.c as k,decode(t.c,b.k,l,n) as l,decode(t.c,b.k,m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 72
A02 R FLOAT 45
A03 P FLOAT 53
A03 R FIXED 55
8 rows selected.

I'm running firefox 35.01 on macpro OS 10.7.5 what is th best way to do ftp?

I'm running firefox 35.01 on macpro OS 10.7.5 what is th best way to do ftp?

Do you mean '''F'''ile '''T'''ransfer '''P'''rotocol (FTP) ?
Please give more details.

Advice on best way to setup Disaster Recovery for SOA Suite 10.1.3.4

Hi Everyone,
I need some advice on the best way to setup Disaster Recovery for a SOA Suite 10.1.3.4 install deploying JSF/ADF OC4J applications.
The way we are trying to do it at the moment is manually copy the "applications" and "applications-deployments" folders for the OC4J application on the production server, then compress and ship the files across to the DR application server nightly. (We don't require high availability).
In the event of a disaster we then extract the files and copy to the OC4J instance (pre-created and configured) on the DR server. Unfortunately to date we haven't been able to reliably setup a DR application (seem to mostly get 404 errors etc), even though the OC4J application has its connection pool resolved to the DR database and is showing as "up" in the ASConsole.
My question is, is there a more "native" way to do what we are trying to do. We do not have Enterprise version of SOA Suite or 11g database so any advanced recovery features are not an option. The setup is also stand alone, i.e. we are not using clustering or RAC etc.
Any ideas would be really helpful.
Thanks,
Leigh.
PS we are also running the production apps server with Oracle Application server 10g 10.1.2.3.0 as the HTTP apache server (with Forms, Reports and Discoverer deployed) and the SOA Suite 10.1.3 applications use the 10.1.2 HTTP server via the HTTP to AJP bridge. So the 10.1.3 OC4J instance is configured to use AJP on port range 12501 - 12600.

For enterprise solutions, AS Guard would work.
http://download.oracle.com/docs/cd/B25221_04/core.1013/b15977/disasrecov.htm#sthref303
However, since advanced recovery options are not available (as you said), then what you are doing should not be too bad.
AMN

Best Way to Define Employee Numbering For Different Countries

HI all
I am working on for a project which will be for Multiple countries.But Each country has different Instances.Now the questions is What could be the Best way to Define Employee numbering for all the Regions ? As for as My knowledge goes It would be Number prefixed by Country.Then How we can have Alpha numeric in employee Coding ? We need to have Fast Formula to Ahieve this task.If any body has come across this scenario please share your thoughts .Any thoughts are greatly Appreciated.
Cheers
Kumar cs

If you have each country on a different instance and you want employees to retain their employee number on transfer between countries, I believe you have two options:
i) Use manual numbering. One recent change to the system is that you can update the numbering profile from Auto to Manual and back to Auto again. So you could potentially leverage this manual workaround when a cross BG transfer happens.
ii) Bespoke module to export all emp numbers into a 'central repository', e.g., flat file, that can be accessed by all instances, imported regularly and then referenced by your Fast Formula. You would also need processing to determine when a person is a transfer from another BG or a new hire; probably have to be some control field on flex. Basically, this is a requirement made difficult by the decision to host each legislation on a different instance; I would never recommend clients to go down this route but I guess it's too late in your case.
If cross BG transfers are not common, e.g., less than 5 a week, I would recommend option 1.

Best way to update RBSELBEST table for invoice

what is the best way to update RBSELBEST table for PO invoice? Is there any BAPI or FM for this?

Thanks. I tried this one also, but it does not update the table.
in case if someone used this, what parameters i need to pass for this to work?

Best way to work on Calendar for PC

I work/organize my schedules on Calendar and iCal, and sync both data on my iPhone and PowerBook, and I love them to work.
And I told my husband about them when he bought new iPhone(3GS 16gb) a few days ago. We found that iCal is not available for PC users, and found the information that using yahoo, google, outlook, etc. What would be best way to work on Calendar of iPhone for PC users? With free service.
Thanks in advance for help!

For syncing contacts and calendar events direct via the iTunes sync process with Windows, Outlook 2003 or 2007 is required.
Google now supports accessing a Gmail account as an Exchange account via ActiveSync with the iPhone's Mail client. This provides for Push access for received messages, and syncing Google contacts and calendar events over the air.

Best way to create customized counter for slideshow.

Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

Have you tried using:
Effect > Text > Numbers ?
You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
(It would have been the first result returned from the search...)
http://www.adobe.com/support/aftereffects/

Best way to create a UI for a Composite app

Hi all,
What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
1) WebDynPro Callable Object that implements GP Interface.
2) Consume the Application services(exposed as web services) in WebDynPro app
3) Creating a WebDynPro Model for the CAF Services.
4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
Plz do remember we are using GP here.
Thanks in advance,
Best Regards,
Sudheer.

Hi,
You can use Web Dynpro or Visual Composer for designing UI for your CA.
1) WebDynPro Callable Object that implements GP Interface.
You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
2) Consume the Application services(exposed as web services) in WebDynPro app :
3) Creating a WebDynPro Model for the CAF Services.
For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
For creating operations, you can use Web Service CO(Application Service) directly in GP Activity.
These links are useful for you.
[link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
[link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
[lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

What is the best way to leave the mini for the night?

Similar Messages

Maybe you are looking for