What is the best way to obliterate a scratch on the back of the iPad?

As the subject says, I need to make a scratch go away on the back of my iPad. I don't know what made the scratch, but it is about 2 inches long and extends from near the center (doesn't touch the apple) toward the edge. I don't want to touch any steel wool to it for fear that it will make a worse mark. So I am curious if there is a good (and well tried) way of making it look new again.
Thanks,
Tom

There is absolutely nothing that you can do that wouldn't be even more noticeable than the scratch. You can't polish it out, because the back of an iPad is not polished... You'll end up with this big polished mark on the back that stands out more from the "matte" texture than the scratch does. I believe the texture is achieved by something similar to sand blasting, but that process would not be something a home user could do, and would probably be VERY detrimental to the finished iPad.

Similar Messages

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

What is the best way to make drawings an notes during class (on my iPad), which I can add to my (digital) handout later on?!

Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
In the end I ended up having to power down the iMac.
Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

TS1324 What is the best way to sync my Outlook 2010 to my iPhone and iPad

What is the best way to sync my Outlook 2010 to my iPhone and iPad.

Note, I'm on the latest iOS - not 6.1.1 as the original post suggests.

What's he best way to include Adobe PDFs on my blog?

What's he best way to include Adobe PDFs on my blog?
I create worksheets as a teacher and would like to share them from my blog. Currently I am linking to Scribd etc to share PDFs. If I upload the worksheets as an image is there a way to adjust the size/resolution of the PDF for easier viewing?
Thanks!

PDFs are just files. Can you upload files to your blog space? If yes, just upload the PDFs then, in a blog entry, provide the web link (URL) for each file (PDF).
Or, place the PDFs into your free acrobat.com "files" storage (5GB free). You have one as you have an Adobe ID (needed to make your post here eh).
https://cloud.acrobat.com/
You can have acrobat.com provide a "share" link to the PDF. Place that into a blog entry.
Or - same idea as above (use a "file share" service) -- Microsoft's OneDrive, Adobe's Creative Cloud, Google drive, DropBox, others ...
Be well...

What is a best way to write SQL ?

Sample Case
drop table t;
drop table b;
create table t ( a varchar2(4), b number, c varchar2(1));
insert into t values ('A00', 10, 'R');
insert into t values ('A01', 11, 'R');
insert into t values ('A02', 12, 'R');
insert into t values ('A03', 13, 'R');
insert into t values ('A00', 10, 'P');
insert into t values ('A01', 11, 'P');
insert into t values ('A02', 12, 'P');
insert into t values ('A03', 13, 'P');
commit;
create table b ( j varchar(4), k varchar2(1), l varchar2(5), m number(3), n varchar2(5), o number(3));
insert into b values ('A00', 'P', 'FIXED', 100, 'FLOAT', 60);
insert into b values ('A01', 'P', 'FIXED', 101, 'FIXED', 30);
insert into b values ('A02', 'R', 'FLOAT', 45, 'FLOAT', 72);
insert into b values ('A03', 'R', 'FIXED', 55, 'FLOAT', 53);
commit;
10:19:13 SQL> select * from t;
A B C
A00 10 R
A01 11 R
A02 12 R
A03 13 R
A00 10 P
A01 11 P
A02 12 P
A03 13 P
8 rows selected.
10:19:19 SQL> select * from b;
J K L M N O
A00 P FIXED 100 FLOAT 60
A01 P FIXED 101 FIXED 30
A02 R FLOAT 45 FLOAT 72
A03 R FIXED 55 FLOAT 53
1/     In table t each reference having 2 records one with P another is with R
2/     In table b each refrence merged into single record and there are many records which are not existing in table t
3/      both t and j tables can be joined using a = j
4/     If from table t for a reference indicator is 'P' then if have to pick up l and m columns, if it is 'R' then I have to pick up n and o columns
5/     I want output in following format
A00     P     FIXED          100
A00     R     FLOAT          60
A01     P     FIXED          101
A01     R     FIXED          30
A02     P     FLOAT          72
A02     R     FLOAT          45
A03     P     FLOAT          53
A03     R     FIXED          55
6/     Above example is a sample ouput, In above example I have picked up only l,m,n,o columns, but in real example there are many columns ( around 40 ) to be selected. ( using "case when" may not be practical )
Kindly suggest me what is a best way to write SQL ?
thanks & regards
pjp

Is this?
select b.j,t.c as k,decode(t.c,'P',l,n) as l,decode(t.c,'P',m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 45
A02 R FLOAT 72
A03 P FIXED 55
A03 R FLOAT 53
8 rows selected.
or is this?
select b.j,t.c as k,decode(t.c,b.k,l,n) as l,decode(t.c,b.k,m,o) as m
from t,b
where t.a=b.j
order by j,k
J K L M
A00 P FIXED 100
A00 R FLOAT 60
A01 P FIXED 101
A01 R FIXED 30
A02 P FLOAT 72
A02 R FLOAT 45
A03 P FLOAT 53
A03 R FIXED 55
8 rows selected.

I'm running firefox 35.01 on macpro OS 10.7.5 what is th best way to do ftp?

I'm running firefox 35.01 on macpro OS 10.7.5 what is th best way to do ftp?

Do you mean '''F'''ile '''T'''ransfer '''P'''rotocol (FTP) ?
Please give more details.

Best way to view and edit OpenOffice files on my new iPad Mini (originally Word and Excel files). Thanks!

Can someone tell me the best way to view and edit OpenOffice files on my new iPad Mini (originally Word and Excel files)? Thanks!

wmf files is a MS Windows video file, you will need a tool to covert the wmf files to another file format OS X will read. Simply Google to find a converter you are interested in and use it.

How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
All other screen functions work normally.

Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

What is the iPad alternative to Flash Player?

What is the iPad alternative to Flash Player?

There are alternate browsers that redirect flash content to their servers, change it to stuff that works on iOS and send it to your device.
They mostly kind of work.
Look at skyfire, photon, iswifter, puffin.
Read some reviews and see if one will work for you.

What is the iPad device id

What is the ipad device id?

If this is a developer questoin, you need to go here... http://developer.apple.com/
If not, it's likely the name you give the iPad in iTunes.

What is the best way to move all data and apps from an old ipad to a newq ipad air?

What is the best way to convert (update) from an original ipad to a new ipad air?

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

What is the best way to cover or clean up a scuff on an iPad Air Space Gray?

Just scratched it. Any way to clean or cover or fill in the scuff on the side of the iPad Air Space Gray?

Even if I bought a case it wouldn't remove or fill in the scuff. There's absoultely no way to do that?

Best way to sync data from temp database back to primary one?

Hello all!!
I'm trying to figure the best way to remedy this situation.
I have a RAC cluster...and one instance went down...some problems with all nodes running, etc. Anyway, while working with Oracle support, I was able to get one node up with sqlplus, and I ran a datapump export, and move that file to a test server I have...as that this was the quickest solution, and I was able to get my developers up and running again on the new server.
I've been working with Oracle support for weeks now...and now all instances on the main RAC cluster all seem to be up and running now.
The trouble is...the instance that was 'moved' to the test server...has had a LOT of work on it in many of the schemas it contains. I need to move the developers back to the main unit where backups are taken and more horsepower for load testing, etc.
What is the best way for me to sync the main server up with the changes made in these weeks on the test server.
Would it be best to take a datapump export from the test box.....move it over to the main server, and basically then....truncate all non-system schemas and just import from the test server (with changes) back onto the main server?
Any other suggestions?
Thank you in advance,
cayenne
ps. Both main and test servers are same version of Oracle 11Gr2 RAC. No rman backups currently being taken on test server, not in archive log mode on test server.

The trouble is...the instance that was 'moved' to the test server...has had a LOT of work on it in many of the schemas it contains. I need to move the developers back to the main unit where backups are taken and more horsepower for load testing, etc.What is the nature of the work? Cleaned and filtered data? New code/stored procedures/triggers/metadata?

Best way to port photos? mac harddrive back to mac

I want to save my iPhoto library to my hard drive, wipe my macbook clean, and then re-import the photos. What's the best way? I want to preserve order, events, etc. Also, in the finder, when I look at iPhoto library, there is not a folder that holds these photos...it points me to the iPhoto application. My library is about 73GB.
Thanks,
Nile.

The iPhoto library is now a unix styled folder like applications. Just drag the library package to the EHD. After dragging your library to the external hard drive open it by launching iPhoto with the option key depressed and, when asked, choose the library on the EHD to make sure it's working before you wipe clean your boot drive.

Best way to change config then change it back after a while.

I spent some time today trying a couple approaches to this, but they all seemed a little klunky.
I'm looking for the best way to change the BGP prefixes which are advertised out to an ISP, based on some check. I want to set a timeout so the router won't attempt to send the route again for say 30 minutes after it is triggered, but then will start advertising it again, and monitor to see if the trigger condition returns. If the trigger condition returns then again withdrawl the route for 30 minutes and so on.
I'm using a prefix-list already to limit outbound route advertisments, so it seems simplest to just make a config change to remove one line in the prefix-list, then a few minutes later put it back.
I tried just using the "cli command wait", but if I set the wait period too long, the applet seemed to die, and never ran the later cli commands to put the prefix-list line back. There is also a exit-time clause for the event, but I couldn't figure out how to put the line back after the exit-time expired. Lastly I tried doing an event with a watchdog timer, but also couldn't get that to work either. Before I spend too much time working on differant options, I wanted to see if anyone had any recommendations.
I've done some TCL scripting on Cisco routers, but that seemed to be overkill for this, and I wanted to keep the config easy to manage for peers who might not be as proficient in TCL scripting.
This is intended for ASR-1002X routers if it matters.
Any suggestions would be much appreciated.
Thanks
Derek

Thanks for all your help Joe.
Ok, so here is my current script, which seems to be working pretty well (changing to entry-type "value" fixed the variability in detection times). For testing in the script below, I'm using a 30 second timeout for when the line gets put back, and a 60 second timeout for when monitoring should resume after the event is triggered. The script checks the value of the OID every 5 seconds.
The only other thing I would like to do with it that I can't figure out, is how to use an environment variable for the exit-time. Ideally, I would just add a value, like 10 seconds, to the ATimeout variable. However I can't figure out the syntax to just use a var for the exit-time. Anyone know the secret (or if it is possible?)
event manager environment ATimeout 30
event manager environment q "
no event manager applet DDOS_RESPONSE01
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit
event manager environment ATimeout 30
event manager environment q "
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit

What is the best way to obliterate a scratch on the back of the iPad?

Similar Messages

Maybe you are looking for