What is the best way to re-install Windows XP in Boot Camp?

I installed Windows XP on my Boot Camp partition on my MacBook for several months. Recently I have had serious problems with Windows Explorer (If I right click or try to copy, delete, drag files, it crashes). I've decided to just to do a clean install of XP and start over. What is the best way to do this?
I realize that I can just remove the partition through Boot Camp assistant, but I have read people on the web have had some issues doing this. I've read that to Erase and reformat the Windows partition" is easier to do.
There is also something called "Perform a Repair Installation" inside Windows XP. This would be preferable because I think this would allow all my applications to stay present. I don't have problems with my applications, just Explorer. Can I do this inside my Windows partition as if it were a normal Windows computer? This would be the best solution if it's possible.

Axel,
Unfortunately System Restore didn't work. I tried a few dates, but what happened is it said it couldn't restore and that my computer remained unchanged. So I will move on to the next stage. Reinstall Boot Camp drivers (I don't think that will help because they've worked flawlessly for so long) and then do a REPAIR WINDOWS.
But I am going to wait until the weekend when I don't have work and can make sure I have a full backup, plus numerous other things, like doing uninstalls on some programs so that I can reinstall them should I end up with a totally complete new installation.
My experience with Windows over the decades is that a lot of their utilities don't work as promised. That's what just happened with System Restore. So if I have a problem with REPAIR WINDOWS, do I just format my windows drive within Windows and reinstall, or what? Do I have to go back to OS X, eliminate the Windows partition, and start at the beginning with a new BootCamp and Windows installation? I'm asking, because once I get started I want to have a full road map.
Also to clarify, this is with my MacBook. I have no problems with Windows on my Mac Pro.
Thanks for your help.

Similar Messages

  • Upgrading to SSD, what is the best way to clean install and transfer my files over?

    I am upgrading to an SSD and I would like to start clean by doing a fresh installation of Yosemite on the new drive. However, I still want all of my personal files from my current hard drive, like my music, music libraries, photos, and Home folder, transferred over to the new drive. What is the best way of doing this?
    I have Time Machine and a Time Capsule. Could I simply restore a Time Machine backup, or will that defeat the purpose of doing a clean install?
    Should I just back up the home folder and transfer the home folder onto an external drive, then drag the home folder to my new drive? Will that save my iTunes playlists and music?
    I don't need to transfer apps over so I'm not worried about that. Just my documents, files, pictures, music.

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
    Boot From a Recovery HD:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.
    After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard, Snow Leopard and later.)
    For Lion or later select Disk Utility from the Utilities Main Menu.
    After Disk Utility loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the Disk Utility status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If Disk Utility reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the Recovery HD on the external drive, then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
      1. Open Disk Utility from the Utility Main Menu, then click on the Continue button.
      2. After Disk Utility loads select your new hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status of
          the drive in DU's status area.  If it does not say "Verified" then the drive
          is failing or has failed and will need replacing.  Otherwise, click on the
          Partition tab in the Disk Utility main window.
      3. Under the Volume Scheme heading set the number of partitions from
          the drop down menu to one. Set the format type to Mac OS Extended
          (Journaled.) Click on the Options button, set the partition scheme to
          GUID  then click on the OK button. Click on the Partition/Apply button and
          wait until the process has completed.
      4. Select the volume you just created (this is the sub-entry under the
          drive entry) from the left side list. Click on the Erase tab in the DU main
          window.
      5. Set the format type to Mac OS Extended (Journaled.) Click on the
          Options button, check the button for Zero Data and click on OK to
          return to the Erase window.
      6. Click on the Erase button. The format process can take up to several
          hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
      1. Select the destination volume from the left side list.
      2. Click on the Restore tab in the DU main window.
      3. Check the box labeled Erase destination.
      4. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      5. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • What's the best way to (re)install Logic Studio? Need Help.

    I bought Logic Studio a few months ago and installed it on my new MacBook Pro 2.4Ghz with 2G Ram, 160G hard drive @ 7200 rpm. Being new to Logic, at install, I just put all 40+ gigs of content on the computer. After a while I considered putting the Apple Loops (roughly 12gigs) onto an external hard drive to save space on my computer, just to see if it would work, then consider moving more content over later. After doing this the Logic application couldn't find the Apple Loops, and I couldn't find a way to help it see the new path, so my Apple Loops were essentially rendered useless (since I had already deleted them from the computer). So I stopped right there, and haven't done anything else. Just worked with Logic without using Loops, which I have to say is still an incredible program.
    What also seemed strange was this: In moving the Apple Loops, the available disk space on the computer didn't seem to change much. It went down a few gigs, but not the 12 or so I was expecting. Not sure why that is. It seems like Logic and all the content is actually taking up around 50 gigs or so on my computer (and the Apple Loops are supposedly gone or not available). What is that about?
    Feeling like I had really fouled things up, I called Apple Care. They said that the content of Logic is stored in many places in the computer's libraries and system folders, but it was really confusing trying to locate all of it, because the info they sent was from Logic 7 and older versions of GarageBand. I guess Logic 8 is too new for them to have anything on it. There is no uninstall for Logic Studio. But they strongly recommended that I perform an Erase and Install, and then re-install all my software including Logic, and then assign the hard drive I wanted the content in. That would open up a lot of the computer's hard drive space, they said. It seemed like an extreme measure to take for such a small blunder, and I haven't tried it yet, but will if it's the best option.
    If I do this, is running Logic content (i.e. Loops, Impulse Responses, Jam Packs, etc.) from an external hard drive (and the one I have to use is 5400rpm--is that too slow or am I getting too picky?) the best way to go, or should I have all Logic material coming from the same machine? How do I get some of my hard drive space back?
    Ugh.
    Has anyone out there experienced this too? Is there anything documented about where the content is stored for Logic Studio? Is Erase and Install really the best thing to do in this situation?
    So many questions...
    Thanks.

    Hey Blue,
    Let me see if I can help you a bit.
    Logic Studio has 28+ gb of loops. Almost 23 for STP and 6 for the Jam Packs, etc. They should be located in /Library/Audio/Apple Loops/Apple (that's the default install loc.). Copy them to an external drive and then delete them from your main drive. Go to /Library/Audio/Apple Loops Indexes and delete those text files. Now go to /Library/Preferences/Soundtrack Pro and delete those text files, too (more Loop Indexes).
    Now open Logic Pro and it will say 'No Apple Loops found'. Click 'OK' and then open your Loop Browser. Drag all the Jam Pack folders, STP folder, etc. that you want to use onto the Loop Browser. Logic will ask you if you want to 'Copy to Loops Folder' or 'Current Location'. Choose 'Current Location'. Logic will now index the loop folders.
    NOTE: You can change the names of the folders to suit your liking. For example: I added the 2, 3, 4, 5 after the Jam Pack names to make it look smoother on the popup menu and changed iLife Sound Effects to Sound Effects - iLife and Apple Loops for STP to STP. Now the Jam Packs 1-5 come up first on the popup menu and the FX stay at the bottom. I likee!!
    Now, if you like you can take your EXS Factory Samples and Ultrabeat Samples, 3.35 & .889 gb respectively, and copy them to an external drive. I have mine in the same place as my Jam Packs, etc. You can find these files in /Library/Application Support/Logic. Toss out the originals and put ALIASES from the external drive back into the /Lib/App Sup/Logic folder.
    Also, if you open STP and click the Search tab in the right pane you will see a button that says 'Setup' next to it. Click that and you can use the checkboxes in the window to activate/deactivate any of the loop folders available.
    A clean install is the best IMO if you have a little time because a) you DO NOT have to install GB at all (that saves the .aif file size - Logic Studio uses .caf files at half the size of the originals) b) Logic Studio will install the extra GB or Logic 7 content if you need it at it's reduced size. It will basically get rid of all the old clutter that you do not need. Only install what JP's you want and move the bigger stuff to an external.
    Rock up Logic and it should all be in place. That procedure saved me 32.5 gb on my main drive.
    NOTE #2: You have another 12 gb (if you installed all Jam Packs) that reside in the /Library/Application Support/GarageBand/Instrument Library/Sampler. These are the Jam Pack Instruments & Sampler files for World, Symphony, etc. They cannot be moved from the startup HD (as far as I can tell). So keep that in mind if you don't want a certain JP.
    Hope that helps,
    Dave

  • What is the best way to re-install my apps data when changing the hard disk

    My MacBook (120Gb disk) is finally full and I have ordered a 500Gb disk to replace it.
    I am fine with changing over the disk but can anyone tell me the best way to reload all my apps and data from the present disk please?
    I have a Time Machine backup on a Network disk, a copy of SuperDuper and also my original 10.5 OSX install disks.
    Thanks

    Roger, since you have SuperDuper, I think the easiest thing to do would be to make a clone of your current hard drive to the new one when it arrives. You will need an external enclosure for the new drive; make sure it's formatted to Mac OS Extended (Journaled); Disk Utility will do this for you. Then connect that new drive via firewire or USB, and create the clone from your current drive using SuperDuper. Next, remove the internal drive from your Mac, insert the new drive and boot up. You can then place your older drive in the external enclosure to use for extra storage, though it won't be large enough to use as a cloned backup with SuperDuper.
    Good luck!

  • What is the best way to run/install games onto an external HDD?

    I would like to either install Windows on another partition on my 256GB SSD on the new rMBP and run games off an external, or install Windows on an external and games as well. What would be the most efficient (price wise) way to do this without having to sacrifice speed? I was thinking I could use an external thunderbolt hard drive, but it seems like they are all over $300 and over 1TB. I would only really need around 500GB with preferably 7200RPM speeds. Would USB 3.0 be fast enough or would I need to use thunderbolt? I prefer not to have to install 30GB games on the Windows partition on a small 256GB SSD, though I guess I could uninstall and reinstall them as I need (but does this wear down the SSD write speeds over time?) I couldn't get myself to pay another $600 to get a 512GB SSD logic board on the rMBP.
    Thanks for any help. If there are alternative solutions for running games on an external feel free to recommend them.

    If it is possible to install Windows on an external HDD without Bootcamp, then I'd be fine with that. The only problem I see with that is installing the necessary boot files, but it seems like it could be possible to do it manually. I've never done it before though.
    Running programs off an external should be fine so long as they don't have to access Windows OS files directly (supposing Windows was installed on the internal SSD), no?

  • What's the best way to create multiple windows?

    I'm trying to write a program with Text fields and buttons on it which will open a completely different window with Text Fields and Buttons. The best thing I can find is JInternalFrame which creates a Frame inside of the window I'm working with. What do I need to use in order to make them separate?

    Exception occurred during event dispatching:
    java.lang.IllegalArgumentException: adding a window to a container
         at java.awt.Container.addImpl(Container.java:336)
         at java.awt.Container.add(Container.java:228)
         at beve.Frame5.actionPerformed(Frame5.java:181)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1450)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1504)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:378)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:250)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:216)
         at java.awt.Component.processMouseEvent(Component.java:3715)
         at java.awt.Component.processEvent(Component.java:3544)
         at java.awt.Container.processEvent(Container.java:1164)
         at java.awt.Component.dispatchEventImpl(Component.java:2593)
         at java.awt.Container.dispatchEventImpl(Container.java:1213)
         at java.awt.Component.dispatchEvent(Component.java:2497)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2451)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2216)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2125)
         at java.awt.Container.dispatchEventImpl(Container.java:1200)
         at java.awt.Window.dispatchEventImpl(Window.java:914)
         at java.awt.Component.dispatchEvent(Component.java:2497)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:339)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
    I need to take off now but I'll check back later tonight. Thanks for the help everyone :)

  • What is the best way to run a Windows based software on  a Mac?  Paralles Desktop 10 for Mac or Bootcamp?

    I am comparing Parallels Desktop 10 for Mac to Bootcamp.  The difference I see is a seamless operation with Parallels and the need to restart the Mac with Bootcamp.  Previously, I used VMware View Client to use the software from a virtual desktop.  Now I am looking to just use the Mac and trying to find the most efficient system. 

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Please Help, What's the best way to un-install Leopard?

    I have a new MBP 17" . I installed Leopard 2 days after I bought the machine, am having so many keyboard problems, like not being able to type and waiting around for the keyboard to start typing. It has now become very annoying and I cannot get any work done! I think I should un-install Leopard and go back to Tiger. How can I do this successfully and without losing any data. I will back up..... If any one has the answer to this it will be great. I also think that apple knows about this issue, and I think it's really bad policy on their part, not to simply say, WE ARE FIXING IT...... In-fact I think it's downright stupid of them!

    What I meant with external backup is either an external hard drive or another mac where you have a copy of all your important files/applications and you should be able to use Migration Assistant with either. If you want to use MA, it will copy all the files (you can't pick and choose), so what I did was simply connect my external hard drive to the new MBP via firewire and copied over whatever I needed. Since I also keep copies of all installer .dmg's (updates or applications) on the external, I copied those over as well and then just installed my (some third party) applications and/or updates. If you don't have an external hard drive, you should also be able to connect your Powerbook and new MBP via ethernet cable and copy your files over. I used that method as well, using my internet ethernet cable (temporarily disconnected from my cable modem) and following the directions under Mac Help -> Filesharing. I've found both the firewire and ethernet methods easy and quick and they worked for me because I wanted to pick which files I wanted to copy to the new machine (rather than all of them).
    I will wait for quite a while before installing Leopard again (if at all); not only because of the keyboard issue, but Disk Utility seems to have some major problems, and so does the System itself (showing up during 20+ minutes of every Permissions Repair with 71 full pages of "ACH found but not expected in..." listing what seems to be every single system file). I also prefer to open the contents of a folder from the dock in alphabetical order, rather than the admittedly cool looking icons - when you have 120+ items/folders in that folder, it's a waste of time to get through all of those icons. And Spaces didn't work for me either. So, except for the cool desktop picture, I wasn't at all impressed with Leopard. However, I did use the included iLife 08 (except iMovie 08) and custom installed that once I had Tiger up and running.

  • What is the best way to monitor a windows service on a domain controller?

    +1 for SW
    as another solution you can use this Tool “Total Network Monitor”
    http://community.spiceworks.com/how_to/show/2471
    look at #5 to monitor the service and restart, if it is not running
    a notification is also included #3

    We have a need in the office to monitor a specific service running on our domain controller
    Just wondering who else has implemented such a system out there? 
    Our SpiceWorks helpdesk does not run on the domain controller but is in the same domain incase it makes a difference  
    This topic first appeared in the Spiceworks Community

  • What is the best way to run internet explorer on Mac and IPad and is it safe to do so??

    I need to run internet explorer to access new billing software,  what is the best way to do so and is it safe to run this on macbook and ipad if possible??

    You can't run IE on an iPad and the only way to use it on a Mac, since it's been discontinued for years for the Mac OS, is to install Windows either via Boot Camp or via running Windows as a virtual machine using something such as Parallels Desktop (my personal preference).
    Clinton

  • I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive.  I am having trouble with permissions in viewing my old hard drive.  What is the best way to get complete access to my old hd installed in my new Macbook?

    I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again .  What is the best way to get complete access to my old hd installed in my new Macbook?

    Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.

  • HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
    If it turns out you only have the media folder on the external drive then take a look at this post...
    tt2

  • What is the best way to install new version... adobe always leaves stuff behind from the old version

    Hi,
    I've gone through the installation of a new version, well... 8 times before. And have noticed that adobe has the nasty habit of not cleanly uninstalling the previous versions...
    What is the best way to do this?
    Should I do a regular install and trust adobe this time to completely remove the old version and its associated directories?
    Or should I uninstall the old version and install the new one? I've always been afraid to go this route bocause of the organizer files.
    Thanks for your comments.

    So, just to be clear:  the "proper, Adobe-recommended" way to go about an upgrade would be to install the new version and THEN remove the older version by means off "Add/Remove programs"  ??
    Thanks to all for your help.

  • What is the best way to protect my macbook pro? should I install mackeeper? Thank you :)

    what is the best way to protect my macbook pro? should I install mackeeper? Thank you

    MacKeeper is malware that charges a fee. Do not install it under any circumstances.
    Keep your software up-to-date with Software Update.
    Don't click on links in emails, retype the URLs to be sure you know where it is sending you.
    Don't download a "codec" or program to view content on a website from the same site -- standard viewers should come from the codec developer's site, not the content site.
    Don't fall for requests from your bank or PayPal to verify your information -- they don't do it that way.
    Download Flash only from:
    http://get.adobe.com/flashplayer/
    You did NOT win any contests you did not enter, and you are not the 10,000th vistitor to any site.

  • What is the best way to do a clean install

    What is the best way to do a clean install? I bought a new iMac and I am giving my old one to my wife. She has an older iMac. I backed up her computer using Time Capsule and just want to wipe out my old computer and hook up the external drive and import all her data straight over.
    Joe McGarry

    You may just restart your old computer right after/on the startsound press "cmd and r" this shuld get you to recoverymode. Here you can start up disk utilitys, chose your mac HD and press erase. After this close disk utilitys and install OS (you may connect the time capsul already and it will import with the install)

Maybe you are looking for