What is the best way to reconcile and bulk upload user account and entitlement data for an offline resource?

What we think is the following:
Create a GTC resource, with flat file reconciliation and spml provisioning.
Edit the provisioning process to get it work disconnected, based on http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/disconn_resources.htm#CHDDGGHD, we need to modify all SPML sending process tasks to be manual.
Create a disconnected resource from this resource in a sandbox.
In this case we do not need to develop custom codes, we only need to modify the provisioning process to be manual.
Any other solutions or best ways to do it?

Hi Gergely
The best way is to use OIM bulk load utility.
Using the Bulk Load Utility - 11g Release 2 (11.1.2) --> Loading Account Data
This is very easy and smooth.
Thanks & Regards
Shashidhar

Similar Messages

What is the Best way To Copy and paste data from 1 book to another

I have 18 sheets in 5 different books that I want to extract data from specific cells. What is the best way to do this? Example: 1 sheet is called Numbers E-O1 data in 13:WXYZ. The data updates and moves up 1 row every time I enter
a new number. So let's say I enter the number 12. Through a lot of calculations the output goes in 13:WXYZ. To what I call a counter which is a 4 digit number. Anyways, how can I send that 4 digit number to a totally different sheet? To bullet
what I'm talking about
data in cells Row 13:WXYZ in book called Numbers sheet E-O1
send data to book called "Vortex Numbers" Sheet E-O row 2001:CDEF
What formula or Macro can I use to make this work?
thank you!

Hello Larbec,
Syntax:
'[BookName]SheetName'!Range
Enter in cell 2001:CDEF:
='[Numbers]E-O1'!13:WXYZ
This assumes that the file is open in Excel. Otherwise you need to add the path:
'ThePath[BookName]SheetName'!Range
Best regards George

What is the best way to load and convert data from a flat file?

Hi,
I want to load data from a flat file, convert dates, numbers and some fields with custom logic (e.g. 0,1 into N,Y) to the correct format.
The rows where all to_number, to_date and custom conversions succeed should go into table STG_OK. If some conversion fails (due to an illegal format in the flat file), those rows (where the conversion raises some exception) should go into table STG_ERR.
What is the best and easiest way to archive this?
Thanks,
Carsten.

Hi,
thanks for your answers so far!
I gave them a thought and came up with two different alternatives:
Alternative 1
I load the data from the flat file into a staging table using sqlldr. I convert the data to the target format using sqlldr expressions.
The columns of the staging table have the target format (date, number).
The rows that cannot be loaded go into a bad file. I manually load the data from the bad file (without any conversion) into the error table.
Alternative 2
The columns of the staging table are all of type varchar2 regardless of the target format.
I define data rules for all columns that require a later conversion.
I load the data from the flat file into the staging table using external table or sqlldr without any data conversion.
The rows that cannot be loaded go automatically into the error table.
When I read the data from the staging table, I can safely convert it since it is already checked by the rules.
What I dislike in alternative 1 is that I manually have to create a second file and a second mapping (ok, I can automate this using OMB*Plus).
Further, I would prefer using expressions in the mapping for converting the data.
What I dislike in alternative 2 is that I have to create a data rule and a conversion expression and then keep the data rule and the conversion expression in sync (in case of changes of the file format).
I also would prefer to have the data in the staging table in the target format. Well, I might load it into a second staging table with columns having the target format. But that's another mapping and a lot of i/o.
As far as I know I need the data quality option for using data rules, is that true?
Is there another alternative without any of these drawbacks?
Otherwise I think I will go for alternative 1.
Thanks,
Carsten.

What's the best way to create and free temporaries for CLOB parameters?

Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Solaris
I have a procedure calling another procedure with one of the parameters being an IN OUT NOCOPY CLOB.
I create the temporary CLOB in proc_A, do the call to proc_B and then free the temporary again.
In proc_B I create a REFCURSOR, and use that with dbms_xmlgen to create XML.
So the code basically looks like
CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                       ,p_clob      IN OUT NOCOPY CLOB   ) AS
   v_rc         SYS_REFCURSOR;
   v_queryCtx   dbms_xmlquery.ctxType;
BEGIN
   OPEN c_rc FOR
      SELECT col1
            ,col2
            ,col3
        FROM clients
       WHERE client_id = p_client_id;
   v_queryCtx := dbms_xmlgen.newContext(v_rc);
   p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
END;
CREATE OR REPLACE PROCEDURE my_proc AS
   v_clob       CLOB;
   v_client_id NUMBER;
BEGIN
   v_client_id := 123456;
   dbms_lob.createTemporary(v_clob, TRUE, dbms_lob.CALL);
   client_xml( p_client_id => v_client_id
              ,p_clob      => v_clob);
   dbms_lob.freeTemporary(v_clob);
END;However, I just learned the hard way that IN OUT NOCOPY is only a hint, and that Oracle sometimes creates a local variable for the CLOB anyway.
A solution is to change the client_xml procedure above to
CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                       ,p_clob      IN OUT NOCOPY CLOB   ) AS
   v_rc         SYS_REFCURSOR;
   v_queryCtx   dbms_xmlquery.ctxType;
BEGIN
   IF NOT NVL(dbms_lob.istemporary(p_clob),0) = 1 THEN
      dbms_lob.createTemporary(p_clob, TRUE, dbms_lob.CALL);
   END IF;
   OPEN c_rc FOR
      SELECT col1
            ,col2
            ,col3
        FROM clients
       WHERE client_id = p_client_id;
   v_queryCtx := dbms_xmlgen.newContext(p_refcursor);
   p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
END;My concern is that in case Oracle does create a local variable, 2 temporaries will be created, but there will only be 1 freeTemporary.
Could this lead to a memory leak?
Or should I be safe with the solution above because I'm using dbms_lob.CALL?
Thanks,
Arnold
Edited by: Arnold vK on Jan 24, 2012 11:52 AM

Arnold vK wrote:
However, I just learned the hard way that IN OUT NOCOPY is only a hint, and that Oracle sometimes creates a local variable for the CLOB anyway.A CLOB variable in called a locator. Just another term for a pointer.
A CLOB does not exist in local stack space. The variable itself can be TBs in size (max CLOB size is 128TB depending on DB config) - and impossible to create and maintain in the stack. Thus it does not exist in the stack - and is why the PL/SQL CLOB variable is called a locator as it only contains the pointer/address of the CLOB.
The CLOB itself exists in the database's temporary tablespace - and temporary LOB resource footprint in the database can be viewed via the v$temporary_lobs virtual performance view.
Passing a CLOB pointer by reference (pointer to a pointer) does not make any sense (as would be the case if the NOCOPY clause was honoured by PL/SQL for a CLOB parameter). It is passed by value instead.
So when you call a procedure and pass it a CLOB locator, that procedure will be dereferencing that pointer (via DBMS_LOB for example) in order to access its contents.
Quote from Oracle® Database SecureFiles and Large Objects Developer's Guide
>
A LOB instance has a locator and a value. The LOB locator is a reference to where the LOB value is physically stored. The LOB value is the data stored in the LOB.
When you use a LOB in an operation such as passing a LOB as a parameter, you are actually passing a LOB locator. For the most part, you can work with a LOB instance in your application without being concerned with the semantics of LOB locators. There is no requirement to dereference LOB locators, as is required with pointers in some programming languages.
>
The thing to guard against is not freeing CLOBs - the age old issue of not freeing pointers and releasing malloc'ed memory when done. In PL/SQL, there is fairly tight resource protection with the PL/SQL engine automatically releasing local resources when those go out of scope. But a CLOB (like a ref cursor) is not really a local resource. And as in most other programming language, the explicit release/freeing of such a resource is recommended.

What is the best way to store and search 2D data

Hi,
There is a set of data (~10k records ) in 2D dimension.
like this :
Col 1, Col 2, Col3....
What is the best way to store and search those records ?
Thanks in advance
Wilson

Hi,
Either userObjet[][] if you know how much data you have, and the data size is fixed, or use a list of lists. E.g. A Vector of Vectors (some will probably say that you should use an ArrayList instead, and that could be the case, but it sounds like you would want to display the data later on, and a DefaultTableModel (for JTables) uses a Vector as data holder).
Kaj

What is the best way to scan and sort old photos in iPhoto

What is the best way to scan and sort old photos in iPhoto? They do not have digital dates.

Hey Chicago Sue,
Once you scan them and have them on your desktop. You should use Automator and assign the common IPTC tags to the images, so that when you do import them into iPhoto, they get recorded.
Here is an example of an action in Automator:

HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2

What is the best way to secure and harden a Macbook Pro against unwanted surveillance?

What is the best way to secure and harden a Macbook Pro against unwanted surveillance? Tor, VPN, Little Snitch, etc. This would be for that latest version of Mavericks.

djbabybokchoy wrote:
Nothing specific, just speaking in general. Ex-wives, governments, bad guys...anyone really. I'm just looking to make my Mac a bit more private and secure, especially when on public networks.
Governments and ex's will/may have recourse to the legal process (or in the case of the Gov they can choose to ignore the legal system if they feel like it) when they want to see something of yours, good luck hardening your Mac against that. The best way to avoid the possibility of snooping over public networks is to avoid them but if you can't then Kappy's suggestion will help.
Strong passwords (everywhere) and don't use the same password in multiple locations.
If you really want to secure your home wireless use Mac address connection authentication, do not allow unknown Mac addresses to connect. It's much stronger than a WPA password alone.

What is the best way to reconcile gl account postings with pay results ?

Hi experts
what is the best way to reconcile gl account postings with pay results ?
is it running wage type reporter ?
or is there any otehr way .. i have variances in wtr n gl posting for a few employees.
Regards

Hi,
Match Payroll Journal (PC00_M40_LJN - Payroll Journal ) with Wage type Report.(PC00_M99_CWTR - Wage Type Reporter )
Finally verify the Posting amount (PCP0) with Payroll Journal....(PC00_M40_LJN - Payroll Journal )
This should solve your issue...
Regards,
Veeram

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

Sharon-
Good idea.
Back up first.
I would probably wait for the merge function of the latest version before merging. Be sure to verify every merge.
Merge Libraries, then from within Aperture move images to referenced on external hard drives.
HTH
-Allen

What is the best way to read and manipulate large data in excel files and show them in Sharepoint

Hi ,
I have a large excel file that has 700,000 records in it. The excel file has a few columns that change every day.
What is the best way to read the data form the excel file in fastest and most efficient way.
2 nd Problem,
I have one excel file that has many rows each row contain some data that has certain keywords.
What I want is to segregate the data of rows into respective sheets(tabs ) in the workbook.
for example in rows have following data
1. Alfa
2beta
3 gama
4beta
5gama
6gama
7alfa
in excel
I want there to be 3 tabs now with each of the key words alfa beta and gamma.

Hi,
I don't really see any better options for SharePoint. SharePoint use other production called 'Office Web App' to allow users to view/edit Microsoft Office documents (word, excel etc.). But the web version of excel doesn't support that much records as well
as there's size limitations (probably the default max size is 10MB).
Regarding second problem, I think you need some custom solutions (like a SharePoint timer job/webpart ) to read and present data.
However, if you can reduce the excel file records to something near 16k (which is supported rows in web version of excel) then you can use SharePoint Excel service to refresh data automatically in the excel file in SharePoint from some external sources.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

What is the best way to import and edit a large amount of footage?

Hello Apple world,
As a newbie to Final Cut 10 I have a question regarding best ways to import footage. I'll give you a quick run down.
I have a 150 gig of gopro footage that I just hit 'import' to recently (from my external HD), it took around 10 hours to process it all.
Its all under one event, but then somewhat organised into dates etc. But it is very slow. I imported it all at once because it was all footage from the last 6 months of my Whistler/states/fiji trip and want to make a movie out of it, using clips from all over the time, not just in chronological order.
I have the latest mac book pro, 4 gig ram,2.4 GHz i7, 750 hard drive, with nothing else on the computer.
Ive read about creating proxy media, after ive imported, but am still somewhat confused as to the benefit. Does it create duplicates? that will fill up my pretty large HD as it is!
Can you suggest any ways that might make my laptop run a bit faster? Should i delete and work directly from external HD etc etc?
Any suggestions will be greatly appreciated!
Thanks in advance
Harlee

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

What is the best way to encode and compress?

I just finished an hour and a half long video of comedians performing. The client wants this to be put on dvd so he can mass produce it. What is the best way to compress this and encode it? Should I buy compressor or can I do it in handbrake? What are the best best settings to make sure it doesnt lose quality? Please advise...

You should be able to get up to 2 hours at least.
The best way is to export as a Master File and drop it into iDVD, Toast or some other DVD authoring app.

What is the best way to drop and recreate a Primary Key in the Replication Table?

I have a requirement to drop and recreate a primary key in a table which is part of Transaction replication. What is the best way to fo it other than remove it from replication and add again?
Thanks
Swapna

Hi Swapna,
Unfortunately you cannot drop columns used in a primary key from articles in transactional replication. This is covered in
Make Schema Changes on Publication Databases:
You cannot drop columns used in a primary key from articles in transactional publications, because they are used by replication.
You will need to drop the article from the publication, drop and recreate the primary key, and add the article back into the publication.
To avoid having to send a snapshot down to the subscriber(s), you could specify the option 'replication support only' for the subscription. This would require the primary key be modified at the subscriber as well prior to adding the article back in
and should be done during a maintenance window when no activity is occurring on the published tables.
I suggest testing this out in your test environment first, prior to deploying to production.
Brandon Williams (blog |
linkedin)

What is the best way to reconcile and bulk upload user account and entitlement data for an offline resource?

Similar Messages

Maybe you are looking for