What is the best way to remove elements 10 from one pc and install it on another?

What steps need to be taken to remove Adobe Elements 10 from one pc and install it on another?

Use back up and restore from the Organizer menu. You are permitted two activations so no real need to deactivate the old copy unless you have installed it previously on another machine.
See these instructions for PSE6 and above.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Similar Messages

  • What is the best way to remove footage from the middle of a clip?

    What is the best way to remove unwanted footage from the middle of a clip? I have a clip that I've trimmed from the start and finsih, but I need to remove "boring" footage from inbetween.

    Thank you for your replies. I tried the blade tool followed by select and delete but it did not seem very precise. I had better success with this aproach at the ends rather than in the middle. I watched a tutorial video on using the precision editor, but the video was small so I had a difficult time following where the person clicked, etc. Any info on using the precision editor would be greatly appreciated. I need to make precise cuts to avoid creating unatural motion for the subject. So far, close but no cigar.
    Regards,
    Michael

  • What is the best way to remove malware from my Macbook

    Safari on my MacBook Pro is infected with malware.  What is the best tool for removing malware from my MCBOOK?

    Hi.
    1. Force Quit Safari .
      Press command + option + esc keys together at the same time.
      When Force Quit window appears, select  Safari .  Press Force Quit button at the bottom of the window.   
    2. Relaunch Safari holding the shift key down.
    3. Turn off wifi and turn it back on.
      Turn off Wifi. Click Wifi icon in the menu bar and select “Turn Wifi off”.
      Visit another website.
      You won’t have internet connection.
      Turn on Wifi. Click Wifi icon in the menu bar and select “Turn Wifi on”.
      Select your Network.
    4. Go to Safari > Preferences > Security > Privacy
          Cookies and website data:
      Click “Details” button.
      Remove the cookie related to this, if there is one.
    5. Download and run adware medic tool http://www.adwaremedic.com/

  • What is the best way to move data from one array to another

    I'm going to be moving data from one array to a larger array on the same RAID but different controller. (I have some extra extra drives I'm also going to be installing Retrospect so I can't just restore from a backup.)
    The RAID has 450GB of production files, fonts etc.
    What is the best way to move the data over?
    I saw that someone had suggested using ditto. Would that be better than MacMV?
    I also own Bru LE so I could use that.
    Any advice would be appreciated.
    Thanks,
    Paul

    Ditto is a great option -- probably the best.
    ditto -rsrc src_folder /Volumes/targetvolume/targetfolder

  • What is the best way to append data from one field to another?

    I have the following table, table1:
    Name Null? Type
    MAIL_ID NOT NULL NUMBER(10)
    LAST_NAME VARCHAR2(45)
    FIRST_NAME VARCHAR2(45)
    MIDDLE_INITIAL VARCHAR2(1)
    ADDRESS_1 VARCHAR2(45)
    CITY VARCHAR2(35)
    STATE VARCHAR2(2)
    ZIP VARCHAR2(10)
    REMARKS VARCHAR2(200)
    The table has duplicate entries that need to be removed. The records that will be removed need the
    data in the Remarks column appended to the Remarks data of the record that is not deleted.
    For example, the following listing shows a sample of the duplicate records.
    Mail ID Last Name First Name M Address City St ZIP Remarks
    189 BROWN STEPHEN 6706 MOESER LN EL CERRITO CA 94530-2909 Sf7#s124,f16#d7996(NML)[Cl#117][Ml#1649][NMf1#d288][NCf9#d319][SNl#e62]
    211023 BROWN STEPHEN B 6706 MOESER LN EL CERRITO CA 94530 RLl#a12047[IDl#i398]
    287796 BROWN STEPHEN B 6706 MOESER LN EL CERRITO CA 94530 SNl#e1163
    The following listing shows how the kept record should appear after the duplicate records are deleted.
    Mail ID Last Name First Name M Address City St ZIP Remarks
    189 BROWN STEPHEN 6706 MOESER LN EL CERRITO CA 94530-2909 Sf7#s124,f16#d7996(NML)[Cl#117][Ml#1649][NMf1#d288][NCf9#d319][SNl#e62]RLl#a12047[IDl#i398]SNl#e1163
    I have the process of deleting duplicates working but have yet to determine the best way to move
    the Remarks data from the deleted records to the preserved record.
    I know there are probably various ways to approach this.
    Any suggestions will be greatly appreciated!
    Here is the sql for deleting duplicates.
    DELETE FROM table1
    WHERE mail_id in (SELECT mail_id FROM table1
              where not first_name = 'Null' and
    not last_name = 'Null' and
              not city = 'Null' and
              not state = 'Null'and
    not last_name = 'Anon'
              minus
              select min(mail_id) from table1
              group by first_name, last_name, city, state, address_1, organization, title);
    THANKS in advance!!!!

    Here's quick and dirty example probably a better way to do it, but this is what I came up with quickly.
    My table looks like this:
    MAIL_ID LAST FIRST PHONE REMARKS
    123 Ruff Shawn 555-555-5555 Called 10-10-04
    135 Ruff Shawn 555-555-5555 Called 10-12-04
    201 Ruff Shawn 555-555-5555 Called 10-19-04
    The code below will concatenate the remarks column from the rows, and delete the 135 and 201 rows, then update the 123 row with the concatenated remarks.
    declare
    l_remarks varchar2(500);
    l_min_mail_id number;
    begin
    select min(mail_id) into l_min_mail_id
    from test
    group by last, first, phone;
    select remarks into l_remarks from test where mail_id = l_min_mail_id;
    for i in (select mail_id, remarks from test
         where last = 'Ruff'
              and first = 'Shawn'
              and phone = '555-555-5555'
              and mail_id <> l_min_mail_id)
    loop
    l_remarks := l_remarks||','||i.remarks;
    delete from test where mail_id = i.mail_id;
    end loop;
    update test set remarks = l_remarks where mail_id = l_min_mail_id;
    commit;
    end;
    Hope this helps.

  • What is the best way to get PATHS from one Photoshop psd file to another?

    Hi! New on the site, and I signed up specifically to ask the best way to import one .psd file into another, including the paths on the paths palette.
    Almost all of my Photoshop drawings make heavy use of vector paths, which I then stroke using using PS natural-media brushes and the "stroke paths" function (usually with "simulate pressure" checked.) Also, my .psd files tend to be, um, HUGE... and I typically break up a whole drawing into separate PS files and then assemble all of them into one final finished graphic.
    I have no trouble moving raster stuff from file to file. Just put all the layers I want to transfer into a group and drag the group to the other .psd. Works fine, including layer masks. But I have not found a good way to get vector paths from the Paths palette of one .psd to another. Of course I can select paths and copy them to the Win clipboard, switch to the other .psd, and paste them back in. The drawback to that method is that I lose the correct size relation between the results of previously done "stroke paths" operations (on raster layers) and the paths that generated them. Sometimes the copied-in paths are way too large, sometimes way too small, never Just Right.
    As I'm sure most of you know, if you resize an entire Photoshop document from within PS, any paths it contains are correctly resized along with everything else. That's no longer true after grouped raster layers are dragged over to another document but paths are copied and pasted in. The size connection is lost. (Location placement, too.)
    I WANT those paths! After I bring a piece of a drawing into the full final drawing, what looked good when I was working on it separately often doesn't look right any longer and I want to re-stroke those paths using different brush diameter, opacity, etc., or maybe even a completely different brush.
    I've tried bring outside .psd files in as smart objects with the Place command but either that doesn't work or I'm not doing it right. Using Place, the paths in the Placed document don't come in at all.
    I'll be very grateful for any hints or strategies any of you knowledgeable folks can give me. Thanks very much!
    Jim
    Note, PS CS3 extended on Win 7 pro.

    Denny
    1. Connect the two macs - firewire, ethernet, sneakernet as suits you - and copy the iPhoto Library Folder from Old Machine to New Machine. Drag it from Home/Pictures to the same location on the new machine.
    2. Because all the files 'belong' to the account on the old machine, you have to update the file permissions: hence Download BatchMod from
    http://macchampion.com/arbysoft/
    And apply it to the iPhoto Library Folder using the settings found here:
    http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
    (Credit to Old Toad for this one).
    Note: This must be run on the new machine after copying the files over.
    3. Then launch iPhoto on the new machine.
    Regards
    TD

  • What is the best way to remove texture from a scanned textured photo paper?

    The Black and White photo I'm restoring has a texture that I'd like to get rid of. Anyone know how to get rid of it? I'm using Adobe Photoshop CC.

    I would try a levels adjustment layer and move the sliders on either side inward until the texture vanishes. I recall using that technique on a newspaper cartoon.
    You can delete that adjustment layer if the results are not what you want. It won't destroy your photo.
    There are other techniques out there as well.

  • What is the best way to remove files from the hard drive?

    I'm donating one of my computers, and there are certain sensitive files (bank records, etc.) I need to remove. I want them completely removed to the point it's like they never existed, so any hard drive recovery tools can never find them.

    Then you will have to get a replacement set from Apple.
    Since the DVD are your license to OS X they really should be included with the Mac when you sell it.
    Allan

  • What is the best way to move everything from one MacBook Air to another MBA

    I bought a new MacBook Air ( OS 10.6.4, 2.16 GHz, 4GB RAM) = MBA 2. I already have an old MBA (bought late 2009, OS 10.6.0, 1.86 GHz, 2 GB RAM) = MBA 1
    Whenever I had to do a clean install of the MBA 1, I was able to successfully restore all the files and the same architecture of the HD by cloning the MBA 1's HD (onto an external drive) before doing the clean install, then sticking the external drive into the USB port and then using Migration Assistant (selecting other drive in the choices).
    Another method I can use but haven't tried is by connecting the two MBAs together with an ethernet cable (I have ethernet adapters for the two MBAs) and then using Migration Assistant.
    If I use this method, do I have to change anything in Network (in System Preferences) like this person did?
    http://www.zdnet.com/blog/apple/macbook-air-diary-day-3-migration-assistance/125 3
    So the questions I am asking are:-
    1) Which is the better method (faster, more fail-proof, simpler) for migrating?
    External drive plugged into the USB port (with clone of the HD of the older MBA on it)
    OR
    Networking the two computers with an ethernet cable
    2) If I use the networking method, do I have to change anything in Network?
    3) The MBA 2 had 10.6.4 already installed on it. I have used the MBA 2 a little bit, adding browsers and so on, but there is nothing there I want to keep.
    Do I have to do a clean install (sticking the USB flash drive that came with the computer into the MBA 2 and then erasing the disk) before I use the Migration Assistant?
    OR
    Can I just delete all the applications and files I have added since I started using the MBA 2, and then just start up Migration Assistant?
    OR
    Can I just leave the MBA 2 alone and leave it as is and start Migration Assistant? Will the Migration Assistant write over everything that's currently on the computer? (I don't mind if it does.)
    4) Will it be a problem that the MBA 1 has 10.6.0 on it whereas the MBA 2 has 10.6.4 on it? Do I need to update the MBA 1 to 10.6.4 before I do the migration? (I'd rather not if I can avoid it. However, I plan to use 10.6.4 on the new MBA 2).
    Thanks for any replies.

    applecore_eater wrote:
    External drive plugged into the USB port (with clone of the HD of the older MBA on it)
    If the clone is already made, that will be somewhat faster.
    Can I just delete all the applications and files I have added since I started using the MBA 2, and then just start up Migration Assistant?
    Your best bet is to erase the disk, install OSX from the USB stick, then use +Setup Assistant+ when the new Mac restarts. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum).
    4) Will it be a problem that the MBA 1 has 10.6.0 on it whereas the MBA 2 has 10.6.4 on it?
    No.

  • What is the best way to remove all info from a MacBook Pro before passing it along to someone else?          passing it on to someone?

    What is the best way to remove all info from a MacBook Pro before passing it on to someone else?

    Read this: http://www.tuaw.com/2010/09/24/mac-101-preparing-your-old-mac-for-sale-or-recycl ing/

  • What's the best way to removed unwanted files?

    I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks

    bad dad wrote:
    I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks
    Applications are stored perminately on the harddrive [ Macintosh HD ]. When applications are running that is when they appear in a window, they take up RAM. You see your running applications by using activity monitor:
    Macintosh-HD -> Applications -> Utilities -> Activity Monitor
    Application when they are not running, they do not take up RAM.  You will not see any performance improvement when you delete an application from your Harddrive.  [ unless you have filled up your harddrive ]
    Best to have greater than 2gig of free space on your Harddrive.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    Most applications do not take up much space on the Harddrive.  I copy my unused application to a folder named additional applications.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    This will save you a gig of space.
    Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
    http://monolingual.sourceforge.net/
    A detailed write-up on how to use Monolingual:
    http://www.jklstudios.com/misc/monolingual.html
    (3)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (4)
    Buy an external firewire harddrive.
    (5)
    Buy a flash card.

  • What is the best way to remove malware?

    What is the best way to remove malware? I don't want to have all kinds of stuff running in the background slowing my machine. My machine is about 5 or 6 years old and running OS X 10.6.8.

    Has your Mac been infected by a Botnet?
    Simply put, a bot – which is short for robot – is an automated computer program that allows outside sources to control computers remotely without the users' knowledge. A botnet is a network of hundreds or thousands of computers infected with botnet malware that communicates covertly with a command-and-control (CnC) server run by a type of cybercriminal called a botmaster. Unbeknownst to the individual users, their computers are linked in a rogue network which the botmaster can utilize for a variety of nefarious purposes.
    Detailed information here:
    http://mac-internet-security-software-review.toptenreviews.com/how-do-i-know-if- my-computer-is-a-botnet-zombie-.html
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
    More useful information can also be found here:
    http://www.reedcorner.net/mmg/

  • What is the best way to remove crayon writing from my Ipad?

    What is the best way to remove crayon writing from my Ipad?

    All Apple recommends is a damp cloth.
    Depending on how much and thick it is, I'd use a dry papertowel or your fingernail to scrape the bulk of it off (I suggest fingernail so that you use something that can't really scratch the iPad)
    Once you get most of it, then use a damp, not wet, cloth, maybe one that you moistened with warm water to help cut through the waxy nature of the crayon.
    What you don't want to do is use chemicals or anything like a scrubby pad because you don't want to scratch the surface in your efforts to clean it.

  • I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071
    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    Bonjour,
    I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    In article <e35sc3$ru1$[email protected]>,
    "-->dan mode" <[email protected]> wrote:
    > > All
    > > I have a website I would like to remove from the
    internet, However I am
    > > planning on keeping the IP for a development
    location and would like to
    > > put
    > > a page up that says this site is no longer
    available. Is this how you do
    > > it
    > > or are there other pages to display when a site is
    removed.
    > > Thanks
    > > Dave
    Depending on how long the site has been active, it may be
    already
    spidered by search engines and cached. However, for the most
    part, I
    usually use my FTP program OR even Dreamweaver itself (now
    that I can)
    to delete files on the server just as I do locally. Hit the
    delete and
    confirm

Maybe you are looking for