What is the best way to run a Windows based software on a Mac? Paralles Desktop 10 for Mac or Bootcamp?

I am comparing Parallels Desktop 10 for Mac to Bootcamp. The difference I see is a seamless operation with Parallels and the need to restart the Mac with Bootcamp. Previously, I used VMware View Client to use the software from a virtual desktop. Now I am looking to just use the Mac and trying to find the most efficient system.

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Similar Messages

What is the best way to run Sage on a MacBook Pro?

What is the best way to run Sage on a MacBook Pro? I am a first time Apple user.

There's a lot of Sage out thete so fill us in with information. If it runs on Windows then you'll need to create a partition on your mbp using boot camp and install Windows. So what is Sage for you?

What is the best way to run windows on my Mac? And What are the pitfalls I should watch for?

What is the best way to run windows on my Mac? What are the pitfalls/

If you need Windows as your main operating system you would be better off buying a Real Windows PC.
Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

What's the best way to run Logic Pro from external hard drive.

What's the best way to run logic from external hard drive

Hi
Organism wrote:
Logic is designed to run from your Applications folder. I suspect if Logic was moved to an external drive, it might not be able to locate its assets, like loops and libraries.
As long the necessary files are in the correct places on the boot disc, you can run the Logic application itself fom wherever you like. It would not be recommended however, and there would be very little benefit (if any) in doing so.
CCT

What is the best way to run .exe files on my mac?

What is the best way to run .exe files on my mac? I need to run some updates for my john deere gps and the downloads i get can only be run on windows.

There are several options for running Windows software (*.exe files) on a Mac, depending what your program is, how often you use it, and your personal preferences.
One way that does not require Windows is an open source effort called WINE. Check out winehq.org. You may find that that's all you need for your programs. There is also a commercial effort that has grown from WINE, and you will find info about it on the site mentioned. These DO NOT require that you have and install Windows.
If you want to run sessions devoted only to Windows software, and want programs to run as fast as they do on a PC, the Apple's Bootcamp program is useful. With it you dedicate a partition on your hard disk to windows, and on startup choose to either boot into OS X or Windows. Each runs without any connection to the other. This requires you have a copy of the Windows software as well as the applications you want to run.
If you want to be able to easily exchange data between your Windows and Mac programs, and skip back and forth between the two, there are several emulators available that run on Mac OS X and create a Windows environment where many Windows programs can operate along side Mac programs. Parallels and VMwear are two comercial packages available for purchase and Virtual Box is an open source effort available for free. Google will find all three for you.
My only experience is with Virtual Box. It is slow and a bit clunky, but it is free and meets my needs for the very few "just got to have" windows programs I sometimes use.
Google is your friend on this and can provide a lot more, and better, information than I can.
Best of luck,
Ray

What is the best way to run windows on my mac?

What is the best way to run windows on my mac?
I have a particular program that i need to run, and it only runs on windows. I have a macbook pro

As Templeton noted, it depends and will at least be somewhat subjective.
There are basically three options out there. You can use a Windows emulator (Wine or the commercial version of it, Crossover Office), use Boot Camp to "dual boot" or use virtualization software (Parallels, VMWare Fusion, or VirtualBox). Each has its advantages or disadvantages.
The Windows emulators have the advantage of being the one option that doesn't need the purchase of a copy of Windows. Unlike Boot Camp, but like the virtualization options, this allows you to run Windows programs and OSX programs side by side. The big problem, though, is that it is the least compatible option--a lot of Windows software either has "issues" or will not function at all. The Crossover website has information on which programs are known to work and how well they are known to work.
Boot Camp is the option that Apple ships OSX with. You'll need a copy of Windows to install into the partition. You'll effectively divide your disk into two parts and have two machines. The major advantages are, first, you don't need to acquire separate software *AND* the Windows license. As well, it's the highest performance Windows system. What you have is truly a Windows machine. That's both the good and the bad--you aren't going to be able to use OSX software at the same time, and you have to reboot to get back to OSX. I've always thought it was best for someone who likes the Apple hardware and wants to use it for a Windows box--in that case Boot Camp is clearly a great solution.
Finally there's virtualization which seems to be the most popular way to handle Windows, especially if you need to run one vertical market package. It has the advantage of allowing you to use your OSX software at the same time, and the virtualization gives an extremely high level of compatibility. About the only thing that won't run is a virtualization package (and there's not a lot of reason to run that in a Windows VM). There is a performance hit compared to Boot Camp, but it's minimal for all but the most demanding applications (that being high end games).
It will chew up RAM on the OSX machine, but if you have at least 4 GB of RAM it will probably be manageable, especially if you only need to run one Windows program.
You will need both a virtualization program (there are three major ones) and purchase Windows. Two of three programs are commercial packages (Parallels and VMWare Fusion), while the other is an open source option (VirtualBox). Virtual Box has the advantage of being free, but it's by far the least polished of the group.
Which way is best? As was noted, it depends. I run VMWare Fusion on my machines, and I have used CrossOver Office for limited purposes. I've not yet seen, in my use pattern, a reason to go to Boot Camp but I certainly can see cases where it might make sense.

What is the best way to run AirPort Extreme and Airport Time Capsule together?

I have cable DSL, and I was running an AirPort Extreme. DH was sold a time capsule, so I just daisy-chained off the airport. We had an issue with limited reach, so I tried to reconfigure. Now I have no wifi at all. Tried everything I can think of. What is the best way to handle these two products, or should one be left out? Any suggestions would be great.

Decide which one you would like to serve as your router, and configure the other one as a bridge. If they are both the most recent models of each neither one is particularly advantageous over the other.
Connect them to each other with an Ethernet cable if you want to create a "roaming network", or not, if you want to create a "wirelessly extended" network. A roaming network is the better of those two choices.
"Hard reset" the one connected to the modem and use AirPort Utility to configure it. Verify everything works to your satisfaction, then "hard reset" the other and configure it.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

What is the best way to run Quicken 2007 on Lion?

I must use Quicken 2007 but have upgraded to Lion. What is the best way to continue using a program that is no longer compatible with 10.7

Unfortunately, you will need to find a different application; you can't continue to use an app that is not compatible. Or, you can revert back to your Snow Leopard clone (you did back up your SL install before upgrading?) in order to run Quicken. You could have two partitions on your hard drive - one for SL and one for Lion.

What is the best way to run internet explorer on Mac and IPad and is it safe to do so??

I need to run internet explorer to access new billing software, what is the best way to do so and is it safe to run this on macbook and ipad if possible??

You can't run IE on an iPad and the only way to use it on a Mac, since it's been discontinued for years for the Mac OS, is to install Windows either via Boot Camp or via running Windows as a virtual machine using something such as Parallels Desktop (my personal preference).
Clinton

What is the best way to run dual monitors with a 2011 MBP?

I have a 2011 MBP and i want to run dual 1920x1080 monitors. what is the best way to accomplish this? i also have a PC attached to the monitors with the DVI connection (but would be willing to change this to the analog, if necessary). so i have teh analog and HDMI connections available on the backs of the monitors.
what i would like to do is hook the MBP through the HDMI if possible and then i would just be able to change inputs on the monitors depending in which computer i want to use (PC or MBP).
any ideas would be greatly appreciated. thanks.

csb814 wrote:
I have a MacBookPro 17" 1.5 GHz running OS 10.5.7 with 1.5 GB Ram and would like to load Windows XP SSP2 so I can run several specific windows programs that are not Mac supported without a dualcore system.
Ok, you either own a MacBook Pro with an Intel Processor, or a PowerBook with a PowerPC Processor.
If your stated speed is correct, then you own a PowerBook, which will not run Windows natively. development & sales for Virtual PC has ceased. The only emulator still around, I think, is iEmulator & is terribly slow on G4s.
Boot Camp does not work on PowerPC Macs.
Please correct your signature & descriptions so we can identify the correct machine. Thanks!

HT1751 What is the best way to move my iTunes library from an external PC drive to a Mac external drive?

I just make the move to Mac computers. My iTunes library is currently on a PC formatted external drive. I would like to move it to an external drive that i have formatted for Mac. What is the best way to do this?

Is the entire library on the external drive or just the media folder? If it is the latter, and you still have access to the PC then see make a split library portable.
If the drive is in FAT32 format you can connect a portable library directly to the Mac, holding down Option as you start iTunes. Otherwise you either need to copy it to a local drive (Mac should be able to read NTFS) or install a full service NTFS driver so that the library can be read and updated.
tt2

TS3367 I own iPad mini and iPhone 4. I'd like to use FaceTime to talk to my partner whilst I'm in hospital. What's the best way of setting it up. Can I use my apple username for both devices?

So have iPad mini and iPhone. But I'd like to leave my iPad with my partner whilst I'm in hospital so we can FaceTime each other.
What's the best way of setting this up!

http://support.apple.com/kb/HT4319

What is the best way to re-install Windows XP in Boot Camp?

I installed Windows XP on my Boot Camp partition on my MacBook for several months. Recently I have had serious problems with Windows Explorer (If I right click or try to copy, delete, drag files, it crashes). I've decided to just to do a clean install of XP and start over. What is the best way to do this?
I realize that I can just remove the partition through Boot Camp assistant, but I have read people on the web have had some issues doing this. I've read that to Erase and reformat the Windows partition" is easier to do.
There is also something called "Perform a Repair Installation" inside Windows XP. This would be preferable because I think this would allow all my applications to stay present. I don't have problems with my applications, just Explorer. Can I do this inside my Windows partition as if it were a normal Windows computer? This would be the best solution if it's possible.

Axel,
Unfortunately System Restore didn't work. I tried a few dates, but what happened is it said it couldn't restore and that my computer remained unchanged. So I will move on to the next stage. Reinstall Boot Camp drivers (I don't think that will help because they've worked flawlessly for so long) and then do a REPAIR WINDOWS.
But I am going to wait until the weekend when I don't have work and can make sure I have a full backup, plus numerous other things, like doing uninstalls on some programs so that I can reinstall them should I end up with a totally complete new installation.
My experience with Windows over the decades is that a lot of their utilities don't work as promised. That's what just happened with System Restore. So if I have a problem with REPAIR WINDOWS, do I just format my windows drive within Windows and reinstall, or what? Do I have to go back to OS X, eliminate the Windows partition, and start at the beginning with a new BootCamp and Windows installation? I'm asking, because once I get started I want to have a full road map.
Also to clarify, this is with my MacBook. I have no problems with Windows on my Mac Pro.
Thanks for your help.

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

TS1474 What is the best way to run two iphones on the one computer?

I have recenty upgraded to an iphone 5 and my husband has taken over my 4S. However when trying to sync on itunes found even with different log ins for itunes some of my mail and photos ended up on his phone.
Have duplicated ITunes as a copy for one phone and still some data crosses over. What is the best method?
Laptop does not ahve library of our music installed to use as option.
Would apprecaite advice.

More than likely, your issue is sharing of iCloud information. You can run as many phones, iPads, iPods, etc as you want on one PC without issue.
Make sure you under Settings > iCloud that you have different IDs. You should also use separate Apple IDs, which can still sync to the same PC.

What is the best way to run a Windows based software on a Mac? Paralles Desktop 10 for Mac or Bootcamp?

Similar Messages

Maybe you are looking for